Equipment

The LOIP LT-217b modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 2000 Pump: max. flow rate, l/min 10.5 pressure, 0.27 bar Bath volume, l 17 The working fluid is water, water-glycerin mixture, silicone oil. Open part of the bath / depth, mm 360x296/150 Overall dimensions, mm 535x335x370 Weight, kg 13

A set of acoustic portable leakage detector with passive cable detection function "Success ATP-424N" is designed for: • – detection of leaks of liquids, heat carriers in pipelines located at a depth of up to 3 m in channel and channel-free laying; • – detection of energized power cables by passive method at a depth of up to 6 m.

The 2NVR-5DG UM4 pump is manufactured in the climatic version of UM 4 (i.e. for moderate climate) according to GOST standard 15150-69, but to be used at ambient temperature and pumped medium 283 K to 308 K (+10˚C to +35˚C). Electricity grid must meet the requrimemnts of GOST 13109-97. The 2NVR-5DG vacuum rotary vane pump meets the requirements of technical specifications TU 3648-006-00218526-2002. The 2NVR-5DG pump is refueled with VACMA OIL 100 working fluid. Monitoring of the level of the working fluid is ensured by the oil indicator, replenishment is neede when the level of the working fluid is below the minimum level of the oil indicator.

Meets the requirements of the US and German standards. The energy flux density meter (PPE) of the electromagnetic field PZ-ZZM is designed to measure the PPE in continuous generation mode in the frequency range from 0.3 to 18 GHz when monitoring the levels of the electromagnetic field for compliance with the requirements of electromagnetic safety standards. The meter is used to measure the levels of microwave radiation in residential and working premises in the presence of electrical equipment for power, household, switching and information purposes, as well as during a comprehensive sanitary and hygienic survey of territories. The meter is allowed to be used for work in the field. The meter consists of an antenna-converter of the electromagnetic field energy flux density into a constant voltage and a measuring and display unit that performs analog-to-digital conversion, digital signal processing and output of measurement results to a liquid crystal display screen, as well as to a personal computer. The antenna of the meter has three dipole-detector microassemblies that form a mutually orthogonal structure. The resulting PPE value is defined as the vector sum of the PPE measured by each dipole microassembly

Operating temperature range -50...+30 °C Two places for glass viscometers. Stability and uniformity of temperature in the working bath is not worse than ± 0.02 ° C. Bath volume 16 l Overall dimensions 800x530x1210 mm The open part of the bath is 130x130 mm Bath depth 370 mm The size of the viewing window is 125x270 mm Weight 125 kg Power consumption 4.2 kW

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type. Pump for closed or open type thermostating systems. All-metal stamped tub with a volume of 18 liters and a depth of 150 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 18 l Overall dimensions 610x340x430 mm The open part of the bath is 360x260 mm Bath depth 150 mm Weight 16 kg Power consumption 2.2 kW.

The SNVS-50/5 vacuum drying cabinet with a volume of 50 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 500 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.

The AVDM-250 high-vacuum unit is a structure consisting of a vacuum diffusion oil-vapor pump, a nitrogen trap, a vacuum gate, a frame or a plate. The principle of operation of the AVDM-250 unit is based on the pumping action of a vacuum diffusion steam oil pump. When the AVDM-250 unit is operating, liquid nitrogen is poured into the trap. Condensation of working fluid vapors occurs on the elements of the freezing device cooled with liquid nitrogen. The frame (plate) is designed for mounting the components of the unit. The ends of the wires are connected to a connector mounted on the frame of the AVDM-250 unit.

It is designed to maintain the set temperature of the liquid coolant circulating in the internal bath of the thermostat and in the connected external consumers. Feed pump for external closed-type thermostating systems. Cooling capacity 370 W at +20 °C. An internal bath with a volume of 27 liters and a depth of 200 mm. Operating temperature range -30...+100 °C. Overall dimensions 685x395x825 mm The open part of the bath is 320x220 mm Bath depth 200 mm Weight 56 kg Power consumption 3.5 kW.

Execution - Universal Recirculator Type - Closed Case Material - Plastic Number of lamps/power, W - 2/15 Lamp staffing - yes Capacity, m3/h - 93 Categories of premises - IV, V Lamp life timer - Yes Possibility to work in the presence of people - yes Bactericidal efficiency, % - 95.0 Lamp life, h - 8,000 Power consumption, W - 50 Length, mm - no more than 740 Width, mm - no more than 140 Height, mm - no more than 140 Weight, kg - no more than 2.5 Warranty period, months - 12 Filter element - Yes

The installation allows you to grow plants regardless of the time of year and weather conditions. Watering, ventilation and lighting of plants take place automatically. The system allows you to cultivate vegetable, berry, green, ornamental and medicinal plants. The equipment has a number of functions that allow you to identify the optimal modes of growing various crops: • Regulation of plant lighting modes • Plant nutrition management • Machine vision system (in the future, it will allow replacing humans and automatically controlling the microclimate, nutrition and lighting of plants to obtain maximum yields or plants with specified properties) These cultivation systems allow you to develop the following competencies: Chemistry – preparation of nutrient solutions; Biology – plant physiology, biochemistry, agronomy; Physics – spectral composition of light, hydrodynamics, energy supply of the system; Engineering – development of structural features of plant growing systems; IT – data collection and processing, training neural networks in decision-making algorithms; Economics – calculation of planting density, yield, and sales model. Growing plants in the city, in the vicinity of consumers, is mainstream all over the world. According to the UN, city farming will be the main direction of supplying fresh plant products to urban residents. In Russia, this area is especially relevant due to the natural and climatic characteristics of the country. The training of specialists and the development of this area will improve the quality of nutrition with vitamin products of the population and strengthen food security.

Vacuum spectrometers are designed for rapid analysis of alloys based on iron, copper, aluminum and other metals in factory and research laboratories, including the determination of elements having analytical lines in the field of vacuum ultraviolet (VUV) (for example, S, P and C in steels).