Catalog
Back to search results
FT-805 IR Fourier spectrometer
Back to search results
FT-805 IR Fourier spectrometer
A small-sized IR Fourier spectrometer with integrated set-top boxes and two detectors, including a highly sensitive cooled MST. Operating modes: transmission and reflection, NIP, measurements using fiber-optic probes (possible versions with one or two pairs of built-in connectors). It is possible to connect an IR microscope, a telescope to register the spectra of external radiation. The spectrometer can be used as a portable one, and is used, among other things, for express monitoring of technological processes, quality control of liquids in tanks and pipelines, during in-line analyses of biological objects, remote gas analysis.
The installation is designed to create high-quality images on various materials and provides the production of rubber cliche seals and stamps with a resolution of at least 1800 dpi.
Description
It was created on the basis of the innovative Shtrik platform, which is based on a unique control system, the hardware and software of which are entirely developed by specialists of our company.
The installation is designed to create high-quality images on materials such as rubber, metal, plastic and provides the production of cliche seals and stamps with a resolution of at least 1800 dpi.
The fiber laser used in the installation in combination with a system of galvanometric scanners ensures high quality engraving in static mode, does not require water cooling and special maintenance.
When assembling the system, only tested and certified parts are used, which guarantees an especially long service life without additional investments.
Features:
A two-coordinate high-precision positioning system for samples, with the help of which the object table is moved along the X, Y axes. As a result of the positioning system and sequential engraving of image fragments, it is possible to process with high accuracy workpieces with dimensions up to 200 × 300 mm in automatic mode according to the processing program set by the operator;
The algorithm of automatic layer-by-layer engraving using a high-precision mechanism for moving the scanning head along the Z-coordinate allows you to form highly detailed 3D images up to 5 mm deep in metal workpieces (steel, brass, aluminum, titanium, etc.);
A long process of layer-by-layer engraving of deep 3D images (possibly tens of hours) is provided without operator involvement thanks to an automatic algorithm;
The installation is equipped with a built-in system for removing combustion products from the laser radiation exposure zone, as a result of which, the absence of odors and protection of the scanning lens from the products of production is ensured, which is especially important when engraving rubber and plastics;
The installation body completely covers the processing and propagation zones of laser radiation, and the engraving is performed according to the program set by the operator in automatic mode with the installation covers closed. This design of the installation allows it to be attributed to laser devices of hazard class 1.
The installation is designed to create high-quality images on various materials and provides the production of rubber cliche seals and stamps with a resolution of at least 1800 dpi.
Description
It was created on the basis of the innovative Shtrik platform, which is based on a unique control system, the hardware and software of which are entirely developed by specialists of our company.
The installation is designed to create high-quality images on materials such as rubber, metal, plastic and provides the production of cliche seals and stamps with a resolution of at least 1800 dpi.
The fiber laser used in the installation in combination with a system of galvanometric scanners ensures high quality engraving in static mode, does not require water cooling and special maintenance.
When assembling the system, only tested and certified parts are used, which guarantees an especially long service life without additional investments.
Features:
A two-coordinate high-precision positioning system for samples, with the help of which the object table is moved along the X, Y axes. As a result of the positioning system and sequential engraving of image fragments, it is possible to process with high accuracy workpieces with dimensions up to 200 × 300 mm in automatic mode according to the processing program set by the operator;
The algorithm of automatic layer-by-layer engraving using a high-precision mechanism for moving the scanning head along the Z-coordinate allows you to form highly detailed 3D images up to 5 mm deep in metal workpieces (steel, brass, aluminum, titanium, etc.);
A long process of layer-by-layer engraving of deep 3D images (possibly tens of hours) is provided without operator involvement thanks to an automatic algorithm;
The installation is equipped with a built-in system for removing combustion products from the laser radiation exposure zone, as a result of which, the absence of odors and protection of the scanning lens from the products of production is ensured, which is especially important when engraving rubber and plastics;
The installation body completely covers the processing and propagation zones of laser radiation, and the engraving is performed according to the program set by the operator in automatic mode with the installation covers closed. This design of the installation allows it to be attributed to laser devices of hazard class 1.
FT-801 IR Fourier spectrometer
It is designed for recording absorption spectra of solid, liquid and gaseous substances in the near and middle IR region (including drugs, lacquers and paints, petroleum products, explosives, pharmacological preparations, polymer films and fibers) with their subsequent identification, as well as for qualitative and quantitative analysis of mixtures containing several components.
SIMEKS
Novosibirsk
Produced in: Novosibirsk
RNA Vaccine production System
1 supp.
It allows the generation of lipid particles for their subsequent use in the creation of RNA vaccines.
The Russian equivalent of Nanoassembler systems.
Abisens
Sirius
Produced in: Krasnodar region
Laboratory mercury analyzer "RA-915Lab"
1 supp.
Technical specifications:
Measuring range 0.5–500 ng
Sample dispenser capacity 5000 mg / 2800 ml
Analysis time 1-5 min
Operating temperature range with software control 50-950 °C with software control
The capacity of the autosampler is 45 samples
Power supply 220 ± 22 V, 50 ± 1 Hz Dimensions (LxWxH), no more:
with autosampler
without autosampler
450x840x460 mm
450x490x460 mm
Weight, no more:
with autosampler
without autosampler
57 kg
40 kg
Lumeks
Saint Petersburg
Produced in: Saint Petersburg
Pure nitrogen generator GCHA-120
from
382 800 ₽
GCHA-120 nitrogen generators are designed to produce in laboratory conditions nitrogen of the highest purity that is used to power analytical instruments, boxes with an inert atmosphere.
Technical specifications
The grade of nitrogen produced according to GOST 9293-74 is high purity, grade I
Volume fraction of nitrogen is not less than % by volume (including impurities of inert gases — argon, neon, helium) 99.999
Volume fraction of oxygen is not more than, % vol. 0.0005 (5 ppm)
Volume fraction of water vapor is not more than, % vol. 0.0007 (7 ppm)
Volume fraction of hydrogen is not more than, % vol. (ppm) 0.0002 (2 ppm)
The volume fraction of the sum of carbon-containing compounds in terms of methane is not more than, % vol. (ppm)*
(with a methane content in the supply air of not more than 4 ppm) 0.0003 (3 ppm)
Maximum nitrogen capacity is at least 120 (2.0 l/min), l/h
Nominal nitrogen output pressure (with the throttle open) is 4 ati
The time of setting the operating mode for single-shift operation is no more than 45 min
Nominal inlet air pressure is 6 ati
Maximum allowable inlet air pressure is 8 ati
Minimum inlet air pressure is 5.5 ati
Compressed air consumption, at nominal inlet pressure and maximum flow rate is no more than, l/h, 3600 (60 l/min)
Power consumption is not more than, VA, 100
Overall dimensions, (width x depth x height) are not more than, mm, 230x580x680;
Weight is not more than, kg 32
Working conditions:
ambient temperature, C°, from +10 to +35
Electric power supply from
single-phase AC mains voltage, V, 220± 10%
and frequency, Hz, 50 ± 1
Average full service life is at least 6 years
The generator for electrical safety meets the requirements of Class 1, type H according to GOST 12.2.025-76
NPP Himelektronika
Moscow
Produced in: Moscow
Atomic emission spectrometer Iskroline 500
1 supp.
The main advantage of a mobile spectrometer is the ability to measure the composition of alloys not only in the laboratory on specially prepared samples, but also directly in a workshop or warehouse without cutting the product or workpiece.
Iskrolajn
Saint Petersburg
Produced in: Saint Petersburg
Liquid chromatograph "Lumachrom-M"
1 supp.
The liquid chromatograph "Lumachrom-M" provides maximum automation of the analysis. The device is controlled using specialized software, which in combination with the continuous eluent supply mode and the autosampler gives the maximum level of autonomy of operation. In addition, such a solution minimizes labor costs and the influence of the human factor.
The unique design solutions of the chromatograph provide continuous pulsation-free flow of the mobile phase in both isocratic and gradient modes, as well as the ability to work with any column sizes. Thanks to the improved technical characteristics on the Lumachrom-M device, it is possible to implement a wider list of techniques and GOST compared to previous models.
Lumeks
Saint Petersburg
Produced in: Saint Petersburg
Air Purification Units BOV-1
from
79 200 ₽
They are designed for purification of nitrogen (BOV-1A) and air (BOV-1) from hydrocarbons
Technical specifications
Inlet air pressure is not more than 825 ± 5% kPa (8 ati)
Output pressure control limits is from 0 to 413 kPa (from 0 to 4.0 ati)
Minimum required excess of inlet pressure over outlet pressure is not less than 103 kPa(1 ati)
Maximum permissible air flow is not more than 1.0 l/min
Concentration of hydrocarbons at maximum flow rate in the outlet air is no more than 0.1 ppm
Water vapor concentration at 20°C and 100 kPa is no more than 10 ppm
Instability of the output pressure when the flow rate changes from 0 to the maximum value is not worse than ± 7 kPa
Instability of the output pressure when the input pressure changes by ± 100 kPa is not worse than ± 7
Ready time after switching on at a flow rate not exceeding the maximum value is no more than 30 min
Power consumption is not more than 50 VA
Overall dimensions, (width x depth x height) are no more than 185x310x310 mm
Weight is not more than 5.0 kg
Working conditions:
ambient temperature, °C, from +10 to +35
relative humidity of the ambient air, %, no more, at 35 ° C 80
electric power from a single-phase AC network
with a voltage of 220 +10% -15%
and a frequency of 50 ± 1 Hz
NPP Himelektronika
Moscow
Produced in: Moscow
Nitrogen generator "Ultra Series"
The nitrogen adsorption generator is a special equipment designed to produce nitrogen gas from atmospheric air by the method of short-cycle non-heating adsorption.
Capacity:1.8—1000 m3/h
Purity: 99.99—99.9999 %
Pressure: 4-450 bar
PROVITA
Saint Petersburg
Produced in: Saint Petersburg
Flame spectrometer "Peacock"
The flame spectrometer is designed for rapid determination of a wide range of concentrations (up to 8 orders of magnitude) of sodium, lithium, potassium, calcium, barium, caesium, rubidium in technological solutions. The excitation of atoms occurs in an air-acetylene flame.
The device consists of a three-slit burner with flame control, a pneumatic sprayer, a spray chamber, an optical radiation input system into the "Hummingbird-2" spectrometer and an automatic air and acetylene supply system, with the possibility to control and adjust gas flow.
The use of a three-slit burner provides increased flame temperature over the central slit of the burner due to the external flame layers. This makes it possible to determine low concentrations of calcium and barium. At the same time, it remains the possibility to determine impurities in highly concentrated solutions without clogging the burner slots.
The lighting system of the spectrometer is mirror-lens, thanks to this, radiation collected from both sides of the burner is introduced into the polychromator.
VMK OPTOELEKTRONIKA
Novosibirsk
Produced in: Novosibirsk
LABORATORY HYDROTREATING-REFORMING UNIT
The laboratory unit is designed to evaluate the activity of heterogeneous catalysts in a reactor with a fixed bed for the hydrotreating process.
Ambient temperature from +10 to +35C;
The relative humidity of the air is not more than 80% at a temperature of 25C;.
Single-phase AC network with a voltage of 220 V ± 10% with a frequency of 50 Hz
The average service life of the installation is 5 years.
TECHNICAL CHARACTERISTICS OF THE HYDROTREATING AND HYDROGENATION UNIT Reactor: 1 piece
Reactor volume, 240 ml
Material 12X18H10T
Inner diameter, mm 24
Length, mm 500
Operating temperature range, 0C 20÷600
Operating pressure range, MPa 0÷10
Removable pocket for thermocouples,mm 600
Reactor furnace: 1 piece
Type of furnace Type of furnace Casement
Number of thermostatic zones, pcs 3
The length of the full heated zone of the furnace, mm 450
The length of each of the four thermostatic zones, mm 150
The length of the isothermal zone of the furnace, mm 300
The power consumed by each isothermal zone, W 800
Power consumed by all three zones of the furnace, W 2400
The discreteness of the temperature setting, 0C 1
Hydrogen flow rate shaper: 1 piece
Type of shaper, RGE Bronkhost
Range of supported expenses, l/h 0-100
Inlet pressure, 100 bar
Nitrogen flow rate shaper: 1 piece
The type of the shaper, the leak (Nat2) Hy-Lok
Range of supported expenses, l/h 0-10
Inlet pressure, 0-100 bar
Raw material consumption shaper: 1 piece
Shaper type, liquid pump KAPPA 10
Supported flow range, ml/min 0-10
Output pressure, 0-400 bar
Raw material capacity: 1 piece
Volume, l 4
Maximum pressure, atm 4
Working pressure, atm 0.2-1
Raw Materials Oil
Installation: 1 piece
Operating cycle of the installation, h 120
Inlet gas pressure calculated H2, N2, MPa 10
Actuation pressure of mechanical safety valves, 9.9 MPa
Supply voltage 220V 50Hz
The power consumption of the entire installation is not more than, kW 3
Installation weight without cabinet, kg 120
Overall dimensions, mm 1800x865x550
Overall dimensions of the cabinet, mm 2000x800x880
NPF "META-KHROM"
Yoshkar-Ola
Produced in: Yoshkar-Ola, Mari El
Halogen leak detector "GTI-8"
It is designed to search for leaks of freons and other halogen-containing gases, for example, gas, in working equipment, and when testing systems, including cable ones, for tightness. The GTI-8 halogen leak detector also allows detecting an increase in the concentration of such gases in the room or near the controlled object.
Technical characteristics of the leak detector "GTI-8"
Parameter
Sensitivity of the leak detector GTI-8, m3 Pa/sec., not less
1.0 - 5.3/10e-7
Time constant, sec., no more
3
Compensation of the initial sensor current
Availability
Automatic background signal compensation
Availability
Adjustable trigger threshold
Availability
Food
~220V, 50Hz (14.8V for GTI-8B)
For modification of GTI-8B, continuous operation time, hour, at least
8
Operating mode setting time, min, no more
5
NPO "Gelikon"
Saint Petersburg
Produced in: Saint Petersburg
CRYSTAL-2000 CHROMATOGRAPH
Technical characteristics:
DETECTOR - TYPE OF CHROMATOGRAPH - DETECTION LIMIT, G/S (G/ML) -STANDARD DEVIATION, % - LEVEL OF FLUCTUATIONAL NOISES, A (V) -DRIFT, А/H (V/H)
FID Crystall-2000 5×10⁻¹² 2 2×10⁻¹⁴ 4×10 ⁻¹³
TCD Crystall-2000 (5×10⁻⁹) 2 (2×10⁻⁷) (2×10⁻⁵)
ADC Crystall-2000 5×10⁻¹⁴ 4 1×10⁻¹² 8×10⁻¹¹
FPD-Р Crystall-2000 2×10⁻¹² 6 2×10⁻¹¹ 4×10⁻¹⁰
FPD-S Crystall-2000 2×10⁻¹¹ 10 2×10⁻¹¹ 4×10⁻¹⁰
NPF "META-KHROM"
Yoshkar-Ola
Produced in: Yoshkar-Ola, Mari El
PYROLYZER
The pyrolyzer is designed to simulate the pyrolysis process and synthesis gas production
technical specifications
Reactor operating temperature range, 0C 20÷1100
Reactor inner diameter, mm 22
Reactor length, mm 1350
Thermocouple pocket availability
Length of the isothermal zone, mm 700
The type of furnace is Casement
Number of thermostatically controlled independent zones 1
The discreteness of the temperature setting, 0C 1
The flow range of the liquid pump, ml/min 0.0048÷36
Supply voltage 220V 50Hz
Power consumption not more than 3.3 kW
The discreteness of the temperatures and flow rates displayed on the displays is 0.1
Installation weight without cabinet, kg 100
Overall dimensions, mm 1400 x 400 x 1250
Weight, kg 60
NPF "META-KHROM"
Yoshkar-Ola
Produced in: Yoshkar-Ola, Mari El
PA-1 Portable Aspirator
The PA-1 single-channel portable aspirator is based on the PC-1 portable compressor. It provides air aspiration with a flow rate from 0.1 to 0.8 l/min. The aspirator is powered by an integral battery.
EKAN
Moscow
Produced in: Moscow
Overhead mixer Primelab TM-50
from
35 000 ₽
Main features and benefits:
- The compact and ergonomic design of the mixer body allows it to be used not only in stationary laboratories, but also in mobile mobile stations.
- The submersible type device is ideal for a wide range of laboratory work.
- Intuitive system for smooth power adjustment via the handle.
- Start and stop the device using just one button located on the front panel, providing excellent ease of use.
- The built-in temperature sensor automatically turns off the mixer if there is a risk of motor overheating, ensuring safety and reliability in operation.
Structure and operation of the device:
- The device is made in the form of a compact block made of a plastic case, which makes it light and convenient to use.
- On the front panel of the device there is a potentiometer knob with a switch and an LED indicator.
- On the back of the case there is a hole with a diameter of 7 mm for installing a bracket and a connector for connecting a power supply.
- The lower part of the device is equipped with a three-jaw chuck on a hollow shaft.
- The top of the device has a hole for the shaft of the mixing nozzle, which allows you to change the height of the nozzle without moving the device up or down if it is installed on a tripod.
- The device also has the function of overload protection and complete shaft locking, which ensures its long service life and protects it from unpleasant situations.
Primelab is an innovative and user-friendly overhead drive mixer developed in Russia. Thanks to its technological capabilities and ease of operation, it will become an indispensable tool for achieving high quality and efficient mixing of viscous and dense liquids in various fields of industry and scientific research.
Characteristics
Device overload protection
Eat
Max. viscosity of the stirred sample, mPa*s
10,000
Maximum torque, Ncm
45
A country
Russia
Control type
analog
Mixer shaft diameter max., mm
0.5-10
Motor type
Brushless, DC
Speed range, rpm
20-2200
Overall dimensions, L×W×H, mm
182x61x200
Protection class acc. to DIN EN60529
IP44
Sample volume (water)
20 liters
Display
absent
Timer
absent
Engine power, W
53
Power consumption, W
24
Device weight, kg
net/gross, kg 2.0/3.2
Supply voltage, V
200–240
Current frequency, Hz
50
Overheat protection (shutdown)
Eat
The device is supplied with:
1) device – 1 piece;
2) power supply – 1 pc.;
3) power cable – 1 pc.;
4) instruction manual combined with
passport – 1 pc.;
5) bracket Ø10 mm. for attaching the device to a tripod –
1 PC.;
6) hex key 3 mm. - 1 PC.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Atomic absorption spectrometer "MGA-1000"
1 supp.
Technical specifications:
Operating spectral range, nm from 190 to 900 Spectral resolution, nm, no more:
- in the range from 190 to 600 nm inclusive
- in the range over 600 to 900 nm inclusive 2
3
Limit of detection of manganese, pg, no more than 3
Nickel detection limit, pg, no more than 20
The time of setting the operating mode of the spectrometers, min, no more than 15 The time of continuous operation of the spectrometers, h, no less than 8
The spectrometers are powered by a three-phase alternating current network:
- rated supply voltage, V
- frequency, Hz 380 (50 ±1)
Overall dimensions of the spectrometer, mm, no more than 800 x 475 x 310
Mass of the spectrometer, kg, no more than 50 Power consumed by spectrometers, kV * A, no more:
- in standby modes and settings of analytical parameters
- in atomization and purification modes 0.1
6 Average time to failure, h, not less than 4000
Lumeks
Saint Petersburg
Produced in: Saint Petersburg
Optical system for recording spectra of substances located in remote closed volumes
Designed for monitoring processes in reactors, vacuum chambers, gas pipelines, etc.
SIMEKS
Novosibirsk
Produced in: Novosibirsk