Search

Volume from 5.0 to 1000.0 l; case material stainless steel AISI 304 (AISI 316); shirt material stainless steel AISI 304; elevator for lifting the lid; illuminated viewing glass; mechanical seal of the agitator shaft by Burgmann or equivalent; speed control; various options for strapping according to the Customer's TOR. Strapping elements of Burkert, Wika, Gemu firms; mechanical and chemical defoaming system; Keofitt sampling; it is possible to complete the steam generator, compressor and other technological systems. agitator with direct drive, adjustable speed, two-tier; control of the fermentation process from the keyboard of a personal computer – control and maintenance of the basic parameters of fermentation, the introduction of an additional substrate (recharge) by various algorithms, in particular, by signals from the pO2 sensor, which significantly reduces the consumption of substrates;  control and maintenance of pH, pO2, temperature;  easy assembly/disassembly, quick preparation for work in compliance with basic requirements and standards; fermenters with a volume of up to 20 liters can be combined into complexes of 2-4 pcs. Fermenters can be used in the pharmacological, microbiological industries, as well as in scientific research related to the cultivation of microorganisms.

One control system continuously collects and analyzes data from multiple culture vessels. Thanks to this, you no longer need to spend time constantly monitoring and analyzing data in several parallel fermentations. The configuration below is an example. You can select the fermenter options you need in the Fermenter Configurator section. 3-12 l total volume; 2-10 l working volume; 0.5-3.0 l minimum volume; Temperature control is carried out by flowing the coolant (water) through the jacket of the culture vessel. The fermenter is equipped with a magnetic seal stirring motor from 100 rpm to 1000 rpm; Spin filter for perfusion processes; Fully customizable cover with standard ports; Fermenter Lid: The fermenter lid is equipped with versatile customizable ports; Made from electropolished 316L stainless steel; Lid ports: Port for inoculation; Port for deep aeration; Port for surface aeration; Condenser port; Temperature sensor port; Port for pH sensor; Port for connecting an O2/CO2 gas analyzer; Port for turbidity sensor; 3-pin port; Port for dip tube; Port for sampling; Fermenter components: Control module and software C-BIO for two vessels; Computer and cables; Heating module (vessel jacket); CO2 mass flow controller; Mass flow controller N2; High-speed fixed-speed peristaltic pump - 2 pcs; High-speed peristaltic pump with variable speed - 2 pcs; Temperature sensor; Turbidity sensor; Gas analyzer O2/CO2; pH sensor; Rushton stirrer; Microbubbler; Sterile sampling system; Condenser 15 l/min; Two 250 ml refill flasks with electropolished stainless steel holder.

Biotechno pilot fermenters have a fully aseptic design and are easily validated. The universal C-Bio control system, unified for fermenters of any volume, greatly simplifies the scaling process and allows you to transfer fermentation data to larger fermenters. The total volume is 15-50 liters Working volume 10.5-35.0 l Material of manufacture: 316L stainless steel (for parts in contact with the product) Stainless steel grade 304L (for parts not in contact with the product) Design pressure 3.0 kg/cm3 (capacity) 4.0 kg/cm3 (jacket) Design temperature 143°C (capacity) 151°C (shirt) Surface treatment Internal polishing 0.4 µm + electropolishing External polishing 1.2 µm Ports on capacity Upper Port for diaphragm pressure gauge Port for diaphragm pressure transmitter Bursting membrane Exhaust gas outlet and condenser Inoculation Viewing window Foam sensor port Nozzle for CIP Spare port Upper side walls Air supply Viewing window Culture liquid supply x 3 Ring Bubbler Spare port Lower side walls Port for PT100 temperature resistor sensor Port for pH sensor Port for dissolved oxygen sensor Spare port Sampling port Shirt Steam supply / outlet of the cooled water Steam output / Cold water supply (including safety valve and pressure gauge) Low drain valve 2. Mixing mechanism Top drive with single mechanical seal 0.25 kW DC motor Speed 30-600 rpm (inverter control) Val – F20 Adjustable three-level paddle stirrers 3 welded partitions 3. Aeration mechanism Automatic air supply 2 VVM 5" high-efficiency 0.2 µm filter and 316L stainless steel filter housing Automatic Air flow meter 4. Pressure mechanism The bursting disc Pressure gauge Positioner Pressure sensor Pressure control valve 5. pH/DO control mechanism pH sensor pH Sensor Holder Cable for pH sensor DO sensor DO Sensor Holder Cable for the DO sensor Peristaltic pump (fixed 20 rpm) x 2 Bottle 1 l x 2 6. Defoaming mechanism Defoaming sensor Cable for defoaming sensor Peristaltic pump (fixed 20 rpm) x 1 1 L x 1 bottle 7. Temperature control mechanism Temperature sensor (PT 100) Heat exchanger Pump 8. Strapping and frame Support Corners and channels – STS304 Manufactured strapping Air supply Supply of process steam Supply of pure steam Cooling water supply Return of cooling water Drain of waste water Drain of waste liquids Exhaust gas output Instrumentation Diaphragm valve Direct flow valve Steam trap Membrane pressure gauge Ball valve and pneumatic angle valve Check valve Safety valve Crankshaft, tee Welding of pipes Orbital welding (line in contact with the product) Manual welding (common line)

It is designed for use as a demonstration material, setting up an experiment. The software and measurement complex includes a set of sensors and is designed for use as a demonstration material, setting up an experiment. The complex consists of a set of sensors and a software package. The measurement results are displayed in the form of graphs and digital values on the PC screen. The sensors are designed to work together with a PC via a USB 2.0 interface, running software compatible with Microsoft Windows 10 PRO. The complex is accompanied by: - product passport; - instruction manual; - an inventory of investments. The warranty period for the product is at least 24 months.

Volume from 1.0 to 3.0 liters; case material – quartz glass, base and lid material – stainless steel AISI 304 (AISI 316); autoclaving sterilization method; direct-drive agitator, adjustable speed, special form for mixing viscous media, effective mechanical defoamer; sampling specifically for taking samples with high viscosity; original sensor sealing system, inputs are compatible with Mettler-Toledo sensors;  control of the fermentation process from the keyboard of a personal computer – control and maintenance of the basic parameters of fermentation, the introduction of an additional substrate (recharge) by various algorithms, in particular, by signals from the pO2 sensor, which can significantly reduce the consumption of substrates;  control and maintenance of pH, pO2, temperature;  easy assembly/disassembly, quick preparation for work in compliance with basic requirements and standards; fermenters can be combined into complexes of 4 pcs. Fermenters can be used in the pharmacological, microbiological industries, as well as in scientific research related to the cultivation of microorganisms.

Volume from 5.0 to 10.0 l; case material – quartz glass, base and lid material – stainless steel AISI 304 (AISI 316); autoclaving sterilization method; direct-drive agitator, adjustable speed, special form for mixing viscous media, effective mechanical defoamer; sampling specifically for taking samples with high viscosity; original sensor sealing system, inputs are compatible with Mettler-Toledo sensors;  control of the fermentation process from the keyboard of a personal computer – control and maintenance of the basic parameters of fermentation, the introduction of an additional substrate (recharge) by various algorithms, in particular, by signals from the pO2 sensor, which significantly reduces the consumption of substrates;  control and maintenance of pH, pO2, temperature;  easy assembly/disassembly, quick preparation for work in compliance with basic requirements and standards; fermenters can be combined into complexes of 2 pcs. Fermenters can be used in the pharmacological, microbiological industries, as well as in scientific research related to the cultivation of microorganisms.

Insulin-like human growth factor I is a protein from the family of insulin-like growth factors, a hormone with a pleiotropic effect, which is involved in the growth processes of cell proliferation and differentiation, promotes cell survival, maintains their functions, and has anabolic effects.

Functional features Working volume 250l. Maintenance of a wide temperature range in the working area (from -5 ° C to 50 ° C). LED lighting with variable spectrum and intensity. Multi-zone lighting distributed over the working volume. Four removable shelves. Execution of the working chamber: stainless steel. A two-door system for the possibility of surveillance. Multi-zone temperature monitoring. Control of the moisture content in the soil. Color TFT display.

Technical specifications: Limit of detection of the control substance (phenol) in water, mg/dm3, no more 0,005 Measurement range of the mass concentration of the control substance (phenol) in water, mg/dm3 from 0.01 to 25 Measurement range of the directional transmission coefficient, % from 5 to 100 Limits of permissible absolute error of measurements of the directional transmission coefficient, % ± 2 Warm-up time, min, no more than 30 Continuous operation time, h, at least 8 Overall dimensions, mm, no more than 305x320x110 Weight, kg, no more than 6.5 AC power supply: - AC power supply voltage, V - frequency, Hz (220 ±22) (50 ±1) Power consumption, In × A, no more than 36 Time to failure, h, not less than 2500

Interleukin 4 is a pleiotropic cytokine that regulates the cellular and humoral immune response and is involved in the processes of proliferation, differentiation, and activation of cells of various types. IL-4 is expressed by activated T lymphocytes, mast cells, dendritic cells, NKT cells, basophils, eosinophils. The epithelium and tumor cells are sources of IL-4 in tissues.