Primelab

Primelab

199 products
View:
Telephone number:
Address:
Russia, Mytishchi, 2v
Address:
Russia, Mytishchi, 2v
  • Selected: 0
    Applying
  • Selected: 0
    Names
    Loading...
  • Selected: 0
    Manufacturer
  • Selected: 0
    Made in
  • Selected: 0
    Additional
All filters
  • 9
    Applying
  • 33
    Names
    Loading...
  • 1
    Manufacturer
  • 2
    Made in
  • 5
    Additional
View:
189 products
Vacuum membrane pump PL.HM03.01.60 Primelab
Vacuum membrane pump PL.HM03.01.60 Primelab
from 90 000 ₽
1 supp.
The PL.HM03.01.60 Primelab vacuum diaphragm pump is suitable for creating a vacuum up to 60 mbar and a flow rate of 38 l/min. It has a dry design that does not require lubrication. Quite easy to use and does not create any inconvenience during operation. Its noise level does not exceed 75 dB. With a light weight of 6.9 kg, it has compact dimensions (289.5x160x200 mm), allowing the pump to be integrated into an already equipped space. Complies with IP20 protection class. The PL.HM03.01.60 Primelab vacuum diaphragm pump is supplied in the following package: vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately). Warranty and post-warranty service is available in Russia.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Desiccator 2-180 mm Primelab, without tap, light glass
Desiccator 2-180 mm Primelab, without tap, light glass
from 1 806 ₽
Desiccator 2-180 mm Primelab does not have a tap. Made of light glass, which provides the ability to monitor in real time the state of substances inside the container. Suitable for storing and drying various substances. The desiccator is supplied complete with a porcelain ring with holes. It must be placed at the bottom of the dish and sprinkled with a desiccant, which will absorb all the moisture and dry the substances under vacuum conditions. Characteristics: • Volume – 3000 ml • Diameter – 180 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab light glass reagent jar, 20000 ml
Primelab light glass reagent jar, 20000 ml
from 10 406 ₽
The light glass reagent jar is designed to work with any amount of substance up to 20,000 ml. The package includes a cover. The jar itself has a capacity scale for quickly determining the volume of contents. Designed for reusable use with the possibility of sterilization. Characteristics: • Volume – 20 l • Height – 505 mm • Diameter – 299 mm • Thread - GL45.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Magnetic stirrer with heating for 2 liters PL-HR-atom
Magnetic stirrer with heating for 2 liters PL-HR-atom
from 19 000 ₽
1 supp.
The 2-liter heated magnetic stirrer PL-HR-atom is an indispensable device in any laboratory. The compact and powerful mixer allows high-quality mixing of small volumes of media that require additional heating. The device is easy to use: it is equipped with a knob-button for setting speed and temperature, which allows you to clearly set the desired characteristics; all values are clearly displayed on the display. Basic Range of operating speeds of the engine shaft, rpm 150-2000 Number of heating places - 1 Maximum volume of heated liquid, l - 2 The working surface of the stove is fire-resistant glass (glass ceramics) Size of the working surface of the plate, LxW, mm - 128 Maximum stove heating temperature, °C - +150 Protection class acc. to DIN EN60529 IP21 Characteristics Heating element power, W - 300 Discreteness of setting the set plate temperature, °C - 1 Accuracy of maintaining the plate temperature, % - 1 Resolution of displayed temperature, °C - 0.1 Connection – external temperature sensor PT1000 (sold separately) Power consumption, W - 300 Features of the model: 1. 7-segment display showing: - speed; - set and actual temperatures; - timer 99 min. Overall dimensions, LxWxH, mm 160x148x64 Device weight, kg 0.9
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Vacuum membrane pump PL.HM03.02.60 Primelab
Vacuum membrane pump PL.HM03.02.60 Primelab
from 100 000 ₽
1 supp.
The vacuum pump chamber is made of fluoroplastic, and other parts are coated with fluoroplastic, which ensures the high chemical resistance of the pump. It has a pumping speed of gases and vapors of 38 l/min at an extreme vacuum of 60 mbar. It is quite compact, so it can be placed in almost any already equipped space. Valve(s) material FFKM (Perfluoro rubber) Working medium Gas Country Russia Chemical resistance Yes Overall dimensions, L×W×H, mm 289.5x160x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB 75 dB Power supply 230 V, 50 Hz Ultimate vacuum, mbar abs. 60 Excess pressure, bar. Max. permissible 0.5 bar Productivity, l/min 38 Drive rotation speed, rpm 1350 Maximum current, A 1.2 Device weight, kg 7.6 Working chamber material PTFE (polytetrafluoroethylene) Equipment: Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Vacuum membrane pump PL.HM01.02.6 Primelab
Vacuum membrane pump PL.HM01.02.6 Primelab
from 200 000 ₽
Vacuum membrane pump PL.HM01.02.6 Primelab is a compact, efficient and durable device for creating a vacuum or pumping gases and vapors in laboratory conditions. It has a low noise level (up to 75 dB) and does not require regular maintenance. Warranty and post-warranty service is available in Russia. The equipment is suitable for working with chemically active and toxic substances and does not react with them. The cameras are made of fluoroplastic, and all its parts have a fluoroplastic coating. The pump capacity is 38 l/min at a maximum vacuum of 6 mbar.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-2000-76 Primelab, TS
Flat-bottomed flask P-2-2000-76 Primelab, TS
from 1 050 ₽
1 supp.
Flat-bottomed flask P-2-2000-76 Primelab, TS is suitable for a wide range of laboratory processes. These include preparation of solutions, synthesis, filtration, distillation, distillation, evaporation, etc. Thanks to the relatively wide neck, the diameter of which is 76 mm, it is suitable for working with bulk and liquid substances with a volume of up to 2000 ml. The diameter of the ball is 166 mm with a height of the entire product of 250 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Petri dish Primelab 100 mm, glass
Petri dish Primelab 100 mm, glass
from 105 ₽
1 supp.
Petri dish PrimeLab 100 mm, glass - round laboratory glassware with a small rim around the perimeter. Its design is well thought out: the diameter of the top part (107 mm) is slightly larger than the diameter of the bottom part (100 mm), making it easy to slide over the base to protect the contents from the elements. Their height is 20 mm. The container is made of transparent tempered glass, which allows you to observe all the processes inside without opening the top part. Designed for reusable use and sterilization under appropriate conditions.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Reagent jar, dark glass PrimeLab, 5000 ml
Reagent jar, dark glass PrimeLab, 5000 ml
Reagent jar, dark glass PrimeLab, 5000 ml is designed for efficient and safe work in a chemical laboratory, small production and more. Durable and opaque dark glass provides reliable protection against ultraviolet radiation, preventing oxidation and degradation of reagents. Characteristics: • Volume – 5000 ml • Height – 330 mm • Diameter – 186 mm • Thread - GL45.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab Borosilicate Glass Vessel
Primelab Borosilicate Glass Vessel
1 supp.
The borosilicate glass vessel from PrimeLab is an effective laboratory accessory that can be used to carry out various processes. This includes heating, mixing, storing reagents and other substances. It has high thermal resistance, chemical inertness, long service life and absolute transparency. This allows you to control all processes inside the glass vessel. The borosilicate glass vessel can be manufactured by Primelab according to the customer's individual requirements.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Glass tubes for Primelab borosilicate glass chromatograph
Glass tubes for Primelab borosilicate glass chromatograph
1 supp.
Glass chromatograph tubes from PrimeLab are made of borosilicate glass. Resistant to mechanical damage, thermal and chemical influences. They have absolute smoothness and perfect transparency, which makes them an excellent solution for working in chromatography. The Primelab company manufactures glass tubes for chromatographs from borosilicate glass to order. The size and diameter of the product depends on customer requirements.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Cylinder with thermostatic jacket Primelab made of borosilicate glass
Cylinder with thermostatic jacket Primelab made of borosilicate glass
A cylinder with a thermostatic cooling jacket is used in various chemical reactions to accurately maintain the required temperature. Made from high quality borosilicate glass, which is chemically and thermally resistant. Withstands high temperatures (up to +300°C). The Primelab company accepts orders for the production of cylinders with a thermostatic jacket of any size according to the customer’s technical specifications. Minimum order quantity – 1 piece.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region