Primelab

The flat-bottomed flask P-2-20000 Primelab, TS has a shape that is suitable for work. The flat bottom provides good stability on any flat surface, and the spherical shape allows you to heat the entire contents of the product evenly. Suitable for various laboratory processes involving substances of any consistency, the volume of which does not exceed 20 liters. The flask is made of durable borosilicate glass, which is suitable for working with alkalis, acids and other aggressive substances. Characteristics of the P-2-20000 Primelab flask: • Ball diameter – 370 mm • Throat diameter – 78 mm • Height – 620 mm.

Desiccator 2-240 mm PrimeLab without tap is an ideal solution for protecting photosensitive samples from exposure to light. Designed for storing and drying various substances. The container is made of dark glass. It has compact dimensions: • The diameter of the desiccator is 240 mm • The height of the entire dish is 325 mm, of which 115 mm is on the lid. Supplied complete with a porcelain disc with holes made in it.

Vacuum membrane pump PL.HM01.02.8 Primelab is an effective laboratory device for creating a vacuum, pumping gases and vapors. It has high productivity (38 l/min) with a maximum residual pressure of 8 mbar. The PL.HM01.02.8 Primelab pump is suitable for working with chemically active and toxic substances, since the chambers are made of fluoroplastic, and all elements and parts have a fluoroplastic coating. In this case, the valves are made of FFKM. The device has a light weight of 8 kg and compact dimensions (321.5x160x200 mm), allowing it to be placed in an already equipped space. Supplied in a complete set sufficient for quick assembly and start of work.

The diaphragm vacuum pump PL.HM02.01.10 has extremely high chemical resistance. The working chambers are made of fluoroplastic, and other parts have a fluoroplastic coating. Complies with protection class IP20. Uniqueness: The versatility of the pump allows you to connect the working chambers in three ways and thereby influence the technical characteristics.

A jar for reagents made of dark glass Primelab, 2000 ml is made taking into account all the subtleties of work in laboratories and other enterprises. It has a flat bottom, a tight-fitting lid, a measuring scale on the wall and an area for notes. The dark glass protects the contents from UV rays. Specifications: • Volume – 2000 ml • Height – 260 mm • Diameter – 136 mm • Thread - GL45.

The KN-2-250-34 flask is manufactured by Primelab from light borosilicate glass, thanks to which you can observe all the processes inside the flask. Does not react with chemically active and toxic substances. It is highly durable and resistant to intensive use. The flask has a conical shape with a wide base (85 mm) and a narrow neck (34 mm) with a height of the entire accessory of 145 mm. Holds up to 250 ml of any substance.

The flat-bottomed flask P-1-1000-29/32 Primelab is similar in all its advantages to the spherical shape. All its contents can be heated evenly and brought to a boil. At the same time, there is no need for a specialized stand for the spherical flask due to the flat, stable base. Suitable for working with liquid reagents and bulk substances due to the wide neck, the diameter of which is 140 mm. At the same time, there is a 29/32 grind on the neck, thanks to which the flask can be connected to laboratory equipment. The height of the entire product is 199 mm.

The Tishchenko Primelab flask for flushing gases through liquid has a non-standard design. Two outlets with olives at the ends are soldered into the outer part, which provide a strong connection with the hoses. There is a partition in the middle of the container. It is thanks to this form that the quality of gas purification is improved. The main purpose of the bottle is washing, cleaning and drying gases. The Tishchenko flask was made by the Primelab company from borosilicate glass, which has a fairly long service life even with intensive use.

The Tishchenko flask for washing gases through bulk substances produced by the Primelab company is a laboratory container. It has a closed shape with oppositely located branches, at the ends of which there are small olives. Thanks to their presence, the bottle can be reliably and firmly connected to the equipment using a soft hose. There is a partition in the middle that does not reach the end. Flushing of gases is carried out when they pass through granular substances, where unwanted impurities are retained. The Tishchenko bottle is made from high-quality borosilicate glass. It has absolute transparency, which allows you to observe all processes inside the container.

The PrimeLab screw cap tube is designed for laboratory processes involving reagent transport, storage, mixing, experimentation and more. Made from durable borosilicate glass 3.3, which is suitable for working with aggressive, toxic and poisonous substances. The PrimeLab tube is intended for reusable use. Withstands high temperatures, including sterilization under different conditions. The diameter of the tube is 15 mm with a length of the entire product of 100 mm. Holds up to 10 ml of substance of any consistency.

A 500 ml light glass reagent bottle with a narrow neck and a ground stopper is designed for storage, transportation, mixing and other laboratory processes. Supplied complete with a ground-in stopper, ensuring a tight connection with the bottle. Characteristics: • Volume – 500 ml • Base diameter – 85 mm • Throat diameter – 33 mm • Height – 172 mm.

Transition P1-2-29/32-60/46 was produced by PrimeLab in its own glass blowing shop from borosilicate glass. It is resistant to temperature changes and wear. It does not enter into chemical reactions with substances, as it has excellent chemical inertness. An adapter is used for seamless connection of parts of equipment, installations and various devices with different joints. Facilitates assembly and maintenance of equipment. It is used in laboratories, small industries in various fields and more. The Primelab company offers blow molding services for various products in strict accordance with the customer’s drawings and technical specifications.