Accessories

FT-801 IR Fourier spectrometers can additionally be equipped with a special optical set-top box that allows efficient use of light-guide systems. 4 types of light-guide probes allow measuring transmission and reflection spectra in solid, liquid and gaseous media Modern IR light guides have high intrinsic transmittance and sufficient mechanical strength, which makes it possible to transfer measurements from the laboratory directly to production - to control the flow of technological processes, check the quality of raw materials and finished products. Application areas: · Chemical and microbiological industry · Pharmaceutical industry · Medicine and Cosmetology · Food industry · Petroleum products, fuels and lubricants · Criminology

Basic properties Wide frequency range; Small VSWR values. Operating conditions Operating temperature range from minus 10 to 50 ° C; The relative humidity of the air is up to 98% at a temperature of 25 ° C. Technical specifications Waveguide cross section, mm 7.2×3.4 Type of coaxial connector (according to GOST RV 51914-2002) IB Frequency range, GHz 25.96-37.50 VSWR 1.35

Purpose: provision of connected equipment with constant voltage; conversion of the RS-485 interface to USB (version 01 only) data transmission via the RS-485 interface (version 02 only).

Glass cylinder for hydrometers of the size 50×500 mm. Designed for thermostats VT RO 01, VT RO 02 and CRYO-VT RO 03.

The ZVPlE-500 shutter consists of a housing with connecting flanges, a shutter mechanism, a lip seal to ensure the tightness of the drive element, cover, and electric drive. The shutter mechanism consists of a carriage, an upper and lower flap, which are pulled together by springs and balls. The carriage moves along the housing guides on bearings. The ZVPlE-500 shutter is opened and closed both by electric drive and manually using a flywheel. To switch to manual control mode, there is a switching device on the electric drive. The manual drive is used to adjust and regulate the shutter. ZVPlE-500 valves are manufactured in climatic versions UHL (i.e. for moderate and cold climate) and O (i.e. general) 4 according to GOST standard 15150-69.

A device for preparing metal samples for spectral analysis. For the preparation of metal samples, an emery cloth or paper with a given size and abrasive material is used. The rotation speed is 1500 revolutions per minute. A quick stop of the motor is provided by an automatic control unit. There is a version in a housing made of composite materials with two discs, each can have its own type of abrasive.

Basic properties Wide frequency range; Small VSWR values. Operating conditions Operating temperature range from minus 10 to 50 ° C; The relative humidity of the air is up to 98% at a temperature of 25 ° C. Technical specifications the length of the waveguide, mm 11×5.5 Type of coaxial connector (according to GOST RV 51914-2002) IP Frequency range, GHz 17.44-25.96 VSWR 1.25

The device for monitoring the loading of raw materials and cement mills UKZM-1 is designed to monitor and indicate the degree of loading of raw materials and cement ball mills by an indirect signal associated with the state of the clinker or raw charge grinding process.

Number of horizontal rods: 3 rods 1230mm long Number of vertical rods: 3 rods 1000mm long rods (d=10mm) – polished stainless steel AISI 304 rod holders – duralumin rod clamps – screws-M-4 lambs (stainless steel AISI 304) it is possible to install horizontal rods in the required position