The set is correlational-acoustic with two radio channels, the ability to trace metal and non-metallic pipelines (by acoustic method and in the "Probe" mode) with the function of saving GPS/GLONASS coordinates and the function of diagnosing shut-off valves. Designed for: – determining the location of liquid leakages from pipelines by the correlation method; – tracing underground utilities; • – tracing of non–metallic pipelines by acoustic method and in the "Probe" mode; - clarification of leakage sites by acoustic leak detector; – diagnostics of shut-off valves; – search for damage to cable lines by induction and acoustic (together with GVI) methods; – creation of an information database of the condition of pipelines and the results of pipeline diagnostics.

TEKHNO-AS

Kolomna

Moscow region

leak detector

equipment

engineering

Produced in: Kolomna, Moscow region

Helium mass-spectrometric leak detector TI1-50M “HeliTest” from NPO “Helikon”

The helium leak detector TI1-50M is a universal highly sensitive device designed to test the tightness of various systems and objects that allow pumping out the internal cavity, as well as those filled with helium or a mixture containing helium, and detect (localize) places of leakage (leaks). Specifications: Measuring range at the leak detector inlet, Pa•m3/s from 5•10-13 to 1•10-5; Range of indications when working by probe method, Pa•m3/s from 1•10-9 to 1•10-5; Time to enter the readiness mode for measurements, no more than, min 5; AC supply voltage, V, Hz 220±10%, 50±1; Power consumption, VA 1200; Overall dimensions (WxHxD), no more than, mm 480x470x390; Weight, no more than, kg 40; Average time to metrological failure, h 15000;

Saint Petersburg

Produced in: Saint Petersburg

Correlational leakage detector Iskor-305

from 598 710 ₽

Correlational leakage detector “ISKOR-305” is a portable device designed for accurate and rapid detection of leaks, liquids from hidden communications and unauthorized tie-ins in pipelines of household and drinking water supply, hot water supply, heating and other pipeline systems, provided that the transported medium in the pipeline is under pressure. ISKOR-305 allows recording acoustic signals using two piezoelectric acoustic sensors and displays a graph of the correlation function. An adjustable filter helps to highlight the desired signal and limit the influence of interference. Leakage indication is carried out visually according to the correlation function graph. •

Kolomna

Produced in: Kolomna, Moscow region

Correlational leakage detector Iskor-210

from 395 370 ₽

Designed for: – determining the location of leakages from pipelines by the correlation method; – tracing underground utilities; – clarification of the leak location by an acoustic leak detector; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics; – search for the place of damage to the power cable by induction and acoustic methods.

Kolomna

Produced in: Kolomna, Moscow region

Correlational leakage detector Iskor-225

from 373 800 ₽

Designed for: – determination of the location of liquid leakages from pipelines by the correlation method; – tracing underground utilities; – clarification of leakage sites by acoustic leak detector; – search for the place of damage to the power cable by induction and acoustic methods; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics.

Kolomna

Produced in: Kolomna, Moscow region

Correlational leakage detector Iskor-219

from 547 170 ₽

Designed for: – determining the location of liquid leakages from pipelines by the correlation method; – tracing underground utilities with the display of the communication axis and digital measurement of the depth of occurrence; – clarification of leakage sites by acoustic leak detector; – search for the place of damage to the power cable by induction and acoustic methods; • – creation of an information database of the condition of pipelines and the results of pipeline diagnostics.

Kolomna

Produced in: Kolomna, Moscow region

Correlational leakage detector Iskor-259KD

from 1 206 810 ₽

The set is correlational-acoustic, with graphical indication of the communication axis and digital depth of occurrence. Designed for: • – determination of the location of leakages from pipelines by the correlation method; • – tracing underground utilities with the display of the communication axis and digital measurement of the depth of occurrence; • – built-in GPS/GLONASS module for saving coordinates with subsequent mapping of the communication route on the map; • – clarification of leakage sites by acoustic leak detector; • – creation of an information database on the condition of pipelines and the results of pipeline diagnostics; • – diagnostics of shut-off valves.

Kolomna

Produced in: Kolomna, Moscow region

Correlational leakage detector Iskor-359KD

from 1 235 100 ₽

The set is correlational-acoustic with two radio channels, the ability to trace metal and non-metallic pipelines (by acoustic method and in the "Probe" mode) with the function of saving GPS/GLONASS coordinates and the function of diagnosing shut-off valves. Designed for: – determination of the location of liquid leakages from pipelines by the correlation method; – tracing underground utilities; • – tracing of non–metallic pipelines by acoustic method and in the "Probe" mode; - clarification of leakage sites by acoustic leak detector; – diagnostics of shut-off valves; – search for damage to cable lines by induction and acoustic (together with GVI) methods; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics.

Kolomna

Produced in: Kolomna, Moscow region

Leak Detector of Combustible Gases and Freons TGP-11

NPP Elektronstandart

Saint Petersburg

measuring equipment (except for electro- and chemistry)

Produced in: Saint Petersburg

Correlational leakage detector Iskor-325ND

from 758 310 ₽

It is intended for: – determination by the correlation method of the location of liquid leakages from pipelines of household and drinking water supply, hot water supply, heating and other pipeline systems, provided that the transported medium in the pipeline is under pressure; – tracing underground utilities; – clarification of leakage sites by acoustic leak detector; – diagnostics of shut-off valves; – creation of an information database of the condition of pipelines and the results of pipeline diagnostics.

Kolomna

Produced in: Kolomna, Moscow region

Halogen leak detector "GTI-8"

It is designed to search for leaks of freons and other halogen-containing gases, for example, gas, in working equipment, and when testing systems, including cable ones, for tightness. The GTI-8 halogen leak detector also allows detecting an increase in the concentration of such gases in the room or near the controlled object. Technical characteristics of the leak detector "GTI-8" Parameter Sensitivity of the leak detector GTI-8, m3 Pa/sec., not less 1.0 - 5.3/10e-7 Time constant, sec., no more 3 Compensation of the initial sensor current Availability Automatic background signal compensation Availability Adjustable trigger threshold Availability Food ~220V, 50Hz (14.8V for GTI-8B) For modification of GTI-8B, continuous operation time, hour, at least 8 Operating mode setting time, min, no more 5

Saint Petersburg

Produced in: Saint Petersburg

Correlational leakage detector Iskor-222

from 574 770 ₽

Designed for: – determining the location of leakages from pipelines by the correlation method; – tracing underground utilities; – tracing of non-metallic pipelines by acoustic method; – clarification of the leak location by an acoustic leak detector; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics; – search for the place of damage to the power cable by induction and acoustic methods.

Kolomna

Produced in: Kolomna, Moscow region

Smart submersible reinforced probe L=1000 mm SZPGU.1000

from 850 770 ₽

The smart submersible reinforced probe L=1000 mm SZPGU.1000 is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor, Android program installed. Operating conditions of the SZPGU.1000 smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPGU.1000 smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor, Android program installed. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor, Android program installed. Automatic transition to sleep mode after 50 seconds. The ability to connect an external power supply. Possibility of calibration.

Kolomna

Produced in: Kolomna, Moscow region

Halogen leak detector MGTI-1

It is necessary to search for leaks of freons and other halogen-containing gases, for example, gas, in working equipment, and when testing systems, including cable ones, for tightness.

NPO "Gelikon"

Saint Petersburg

leak detector

equipment

Leakage detector Success AT-207

from 99 360 ₽

The kit of the portable acoustic leakage detector "Success AT-207" is designed to detect depressurization sites of underground pipelines of heat and water supply systems located at a depth of up to 3 m in channel and channel-free laying. The search for damage sites is carried out by the acoustic method. •

TEKHNO-AS

Kolomna

electrical engineering

Produced in: Kolomna, Moscow region

Leakage detector with passive cable detection function Success ATP-204

from 114 540 ₽

• Designed for: • – detection of depressurization sites of underground pipelines of heat, water, gas, oil supply systems located at a depth of up to 3 m in channel and without channel laying. • – traces of hidden communications (cable lines, pipelines) in passive mode. • – surveys of the excavation area (before opening the route for the presence of cables, pipelines that complicate excavation).

TEKHNO-AS

Kolomna

electrical engineering

Produced in: Kolomna, Moscow region

May be interested in

Acousto-optic modulator for high-power radiation (AOM) KGW-1

Mendeleevo

Produced in: Mendeleevo, Moscow region

AF011B Microassembly

A high-speed signal limiter amplifier. Designed for use in electronic counting frequency meters. Description: The magnitude of the input signals for selecting the switch input and inverting the signal of the limiter amplifier at a supply voltage of ± 5 V: - logical "0" not more than 0.2 V; - logical "1" at least 4.8 V. The value of the input signals of switching on / off the switch at a supply voltage of ± 5 V: - logical "0" no more than 3.3 V; - logical "1" at least 4.1 V. The magnitude of the output signals of the switch at a supply voltage of ± 5 V and a load of 300 ohms connected to zero potential: - logical "0" from 3.1 V to 3.4 V; - logical "1" from 4.0 V to 4.3 V. The minimum input voltage of the sinusoidal shape in the frequency range from 10 Hz to 200 MHz should be no more than 30 mV. The maximum input voltage of the sinusoidal shape in the frequency range from 10 Hz to 200 MHz must be at least 1 V. The value of the supply voltage: - positive 5±0.2 V; - negative -5±0.2 V. The current consumption should be no more than: - from a positive power source 110 mA; - from a negative power supply 35 mA.

Minsk

Produced in: Belarus, Minsk

Moscow

Produced in: Moscow

These LFS can be used in conjunction with waveguide bandpass filters to increase the suppression of spurious signals and expand the upper band of the barrier. Basic properties Low bandwidth losses; A wide barrage strip. Operating conditions Operating temperature range from minus 10 up to 50 ° C; The relative humidity of the air is up to 98% at a temperature of 25 ° C. Technical specifications Waveguide cross section, mm 5.2×2.6 Bandwidth Fh-Fb at the level of -1 dB, GHz 45-53.6 The barrage band at the level of -30 dB, GHz 60-78 Bandwidth loss, 0.5-1.0 dB

TEKHNOYAKS

Moscow

electrical measuring equipment

Produced in: Moscow

Additional devices for testing machines

Tochpribor-KB

Ivanovo

testing machine

measuring equipment (except for electro- and chemistry)

engineering

Ivanovo

universal testing machine

Produced in: Ivanovo

Technical specifications Material: S-TIH53 (Ohara) Length, mm: 13 Height, mm: 1 Thickness, mm: 1.5 Refractive index, mm: 1.823 Period, mm: 0.4 Radius at 45°, mm: 1.35 Transmission, %: ≥99.5 Antireflection coating, nm at one of the wavelengths from the range: 400-1500 Surface quality at λ = 633 nm: λ/4

Saratov

Produced in: Saratov

Vibration converter VT-002

The VT-002 vibration transducers are designed to convert the instantaneous value of the vibration acceleration of an object into an ICP signal of the IEEP standard.

Yaroslavl

Produced in: Yaroslavl

BTS 150/500 Lenses

Technical specifications Material: S-TIH53 (Ohara) Length, mm: 12 Height, mm: 1.0±0.01 Thickness, mm: 1.9±0.1 Refractive index, mm: 1.823 Optical aperture, mm2: 10.0*0.45 Back focal length, mm: 0.09 Transmission, %: >99.5 Pitch, mm: 0.5 Antireflection coating, nm at one of the wavelengths from the range: 400-1500 Numerical aperture: FA 0.5, SA:0.1 Surface quality at λ = 633 nm: λ/4 Residual deviation at full angle FW1/e2 mrad: <7, <10, <13

Saratov

Produced in: Saratov

Vibration converter VT-003

The VT-003 vibration transducers are designed to convert the instantaneous value of the vibration acceleration of an object into an ICP signal of the IEEP standard.

Yaroslavl

Produced in: Yaroslavl

Connecting device UP-4

Technical specifications: Residual capacity when working with immitance meters < 1 pF Residual inductance when working with immitance meters < 0.5 µgn Residual resistance when working with immitance meters < 0.05 ohms Maximum input voltage ±60 V Distance between measuring contacts from 0 to 6 mm Length 1050 mm Weight 160 g

MNIPI

Minsk

electrical engineering

Produced in: Belarus, Minsk

Acousto-optic modulator for high-power radiation (AOM) KGW-2

Mendeleevo

Produced in: Mendeleevo, Moscow region

Wall retable mount KP-xx

from 959 ₽

Universal multifunctional tilt-and-turn device (swivel arm) for fixing laser modules with a diameter (diagonal) from 12 to 30 mm.

Saint Petersburg

Produced in: Saint Petersburg

Vibration converter VT-005

The VT-005 vibration transducers are designed to convert the instantaneous value of the vibration acceleration of an object into an ICP signal of the IEEP standard.

Yaroslavl

Produced in: Yaroslavl

Transformer 150/500

Technical specifications Material: S-TIH53 (Ohara) Length, mm: 13 Height, mm: 1 Thickness, mm: 1.5 Refractive index, mm: 1.823 Period, mm: 0.5 Radius at 45°, mm: 1.35 Transmission, %: ≥99.5 Antireflection coating, nm at one of the wavelengths from the range: 400-1500 Surface quality at λ = 633 nm: λ/4

Saratov

Produced in: Saratov

Piezoelectric vibration measuring transducers DN-3-M1, DN-3-M1 B6

Vibration transducers DN-3-M1 are designed to measure vibration by converting mechanical vibrations into electrical signals proportional to the vibration acceleration of an oscillating object. Vibration converters DN-3-M1 are used in conjunction with vibration measuring devices in factory and laboratory conditions.

VIBROPRIBOR

Yaroslavl

vibration

Yaroslavl

ultrasonic piezoelectric transducer

Produced in: Yaroslavl

BTS 200/400 Lenses

Technical specifications Material: S-TIH53 (Ohara) Length, mm: 12 Height, mm: 1.0±0.01 Thickness, mm: 1.9±0.1 Refractive index, mm: 1.823 Optical aperture, mm2: 10.5*0.45 Back focal length, mm: 0.09 Transmission, %: >99.5 Pitch, mm: 0.4 Antireflection coating, nm at one of the wavelengths from the range: 400-1500 Numerical aperture: FA: 0.6, SA:0.09 Surface quality at λ = 633 nm: λ/4 Residual deviation at full angle FW1/e2 mrad: <7, <10, <13

Saratov

Produced in: Saratov

Technical specifications Material: S-TIH53 (Ohara) Length, mm: 5 Height, mm: 1.5±0.02 Thickness, mm: 1.5±0.01 Refractive index, mm: 1.823 Effective focal length, mm: 0.91 Rear focal length, mm: 0.09 Transmission, %: >99.5 Power within the angle ± 0.7 mrad, %: >85 Antireflection coating, nm at one of the wavelengths from the range: 400-1500 Numerical aperture: 0.8 Surface quality λ = 633, nm: λ/4

Saratov

Produced in: Saratov

Reviews

There are no entries.