Equipment

Maximum heating temperature, °C 400 Temperature difference across the platform, °C, no more than ± 5 Dimensions of the heating platform, mm 435x315 Power consumption, W 2500 Platform material aluminum alloy Overall dimensions, mm 470x453x110 Weight, kg 15

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Three workstations with a diameter of 110 mm with five steel O-rings. Stamped steel tub with a volume of 11 liters and a depth of 160 mm. Bath volume 11 l Overall dimensions 355x310x385 mm The open part of the bath is 295x235 mm Bath depth 160 mm Weight 9.5 kg Power consumption 2.5 kW

CDL lasers of the KLM-808-x series are optimal sources of continuous radiation for the construction of control and automation systems, for scientific and medical purposes.

Technical specifications: Temperature range: without external cooling, °C Current+10 ... +150 with tap water cooling °C Tvods+5 ...+150 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 2000 Pump: max. flow rate, l/min 8,0 pressure, 0.25 bar Bath volume, l 11 Working fluid water, water-glycerin mixtures, silicone oil Open part of the bath / depth, mm 105x296/200 Overall dimensions, mm 268x335x400 Weight, kg 11.5

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-17M, where 17 indicates the volume of the working chamber of the furnace in liters. Power consumption - 5000 watts Dimensions of the working chamber W×D×B – 305×300×185 mm Dimensions W×D×B – 570×580×550 mm Weight – 60 kg

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 4 liters and a depth of 150 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 4 l Overall dimensions 185x410x430 mm The open part of the bath is 120x55 mm Bath depth 150 mm Weight 11 kg Power consumption 2.2 kW

The LOIP LT-112b modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +100 with tap water cooling °C Water+5 ... +100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, bar 0.17 Bath volume, l 12 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 190x296/150 Overall dimensions, mm 355x335x370 Weight, kg 10.2

The muffle shaft furnace with digital control SSHOL-70/11 (hereinafter referred to as the "furnace") is designed for firing products, melting and heat treatment of metals. It can be used as a universal laboratory muffle furnace in metallurgical, ceramic, jewelry production, dental, chemical and food laboratories.

It will help relay protection and automation services, the chief power engineer of industrial enterprises and a wide range of specialists engaged in setting up, monitoring, diagnostics and operation of electrical installations to solve the following tasks: − record emergency waveforms on 4 current channels and 4 voltage channels, with data stored in COMTRADE format - take daily load schedules and carry out long−term monitoring of the parameters of the power grid (recorder) - to monitor the conduct of switching in switchgear − identify the causes of the emergency mode − to evaluate the correctness of the operation of the RSiA and PA devices − determine the harmonic composition of current and voltage (up to and including the 14th harmonic) − control phase alternation − remove the voltage characteristics − measure the phase shift angle and perform the construction of vector diagrams of voltage and current − control the circuits in the SHPT − check the integrity of electrical conductors (ringing) − carry out maintenance of relay protection circuits and power circuits of electrical installations − monitor the status and diagnostics of DC circuits

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Four workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel tub with a volume of 8 liters and a depth of 60 mm. Bath volume 8 l Overall dimensions 540x640x610 mm The open part of the bath is 325x290 mm Bath depth 60 mm Weight 10 kg Power consumption 2.5 kW

Sandy bathhouse "PB MINI" I2T with digital control and a heating area of 200x400 mm. is designed for heat treatment of samples, evaporation and laboratory analysis. The product is equipped with a shutdown timer.

Technical specifications: Melt flow rate for 10 min, g 0.1 - 99.9 The dimensions of the capillary opening, mm dia. 2,095 diam. 1,048 (optional) diam. 1,180 (optional) Set of loads, kg 0,325-5 10-21,6 (optional) Temperature range in the working chamber, °C +50...+450 Accuracy of temperature maintenance, °C: - in the range of 50...300 °C: ± 0.1 - in the range of 300...350 ° C: ± 0.2 - in the range of 350...450°C: ±0.3 The discreteness of setting the temperature of the chamber, ° C 1 Time to enter the operating mode, no more, min 40 Power supply, V/kW 220/0.8 Installation dimensions, WxDxH mm 513x445x590 (920 is the maximum height with a fully loaded polymer chamber and a full stack of loads with a handle for their installation) Installation weight, not more than 70 kg