Equipment

The time of movement of the special product, from the moment of depressurization of the furnace to immersion in the quenching medium is less than 20 seconds;

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-75P, where 75 indicates the volume of the furnace working chamber in liters. Power consumption – 4500 W Dimensions of the working chamber WxDxH- 205x290x185 mm Dimensions WxDxH- 460x580x550 mm Weight – 54* kg (* - with control unit)

Designation SSO-10.13/11 Power, kW 72 Diameter, mm 1000 Height, mm 1300

It is intended for: – determination by the correlation method of the location of liquid leakages from pipelines of household and drinking water supply, hot water supply, heating and other pipeline systems, provided that the transported medium in the pipeline is under pressure; – tracing underground utilities with the display of the communication axis and digital measurement of the depth of occurrence; – built-in GPS/GLONASS module for saving coordinates with subsequent mapping of the communication route on the map; – clarification of leakage sites by an acoustic leak detector. – diagnostics of shut-off valves; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics.

Distillation by the aluminothermic method

It is designed to accommodate test tubes-2-16-150 in the bath of the TMP thermostat when testing the corrosive effect of engine fuels on a copper plate in accordance with GOST 6321. It can be used for temporary storage of test tubes after completion of tests.

Designed for comprehensive studies of the physical properties of the surface using classical optical microscopy, confocal laser microscopy, confocal spectroscopy and scanning probe microscopy (atomic force microscopy). It allows you to get full spectra of Raman (Raman or Raman) scattering and/or fluorescence, confocal laser and confocal spectral images (surface mapping), SPM (AFM) images. The design of the Centaur I complex allows the use of both separate methods (for example, confocal microscopy / spectroscopy) and the combination of methods (including the combination of scanning fields, AFM / Raman studies, etc.).

The AVD-150/63 unit consists of a series-connected two-rotor vacuum pump NVD-600 and a 2NVR-250D plate-rotary vacuum pump. The pumps are connected to each other by means of an adapter, which acts as both a pipeline and a support unit. The AVD-150/63 unit can operate continuously at an inlet pressure of no more than 133 Pa (1 mm Hg) or pumping out one or more sealed vessels with a total volume of 17.5 m3 from atmospheric to maximum residual pressure for 8 hours.

Designation SNO-6 Volume, l 6 The material of the working chamber is ceramic Heating 4 sides Power consumption, W, max 3500 Minimum operating temperature, 0C 100