Equipment

The working fluid of the pump is water. The use of the 3VVN1-6M(H) pump for pumping out water-gas mixtures is allowed only if the bulk of the water is separated and discharged at the pump entrance. Failure to comply with this requirement may lead to unacceptable overload of the engine and destruction of the pump's working organs. The 3VVN1-6M(H) water ring vacuum pump is not intended for use in fire and explosion hazardous industries. The 3VVN1-6M(H) vacuum water ring pump is manufactured in the climatic version of UHL 4 and O4 (i.e. for moderate and cold climate) according to GOST standard 15150-69, meets the requirements of technical specifications TU 3648-053-00218526-2013, designed and manufactured taking into account the requirements of GOST R 52615-2006.

Measurement of electrical conductivity (UEP, UEP20, UEP25), equivalent salinity according to NaCl, total salinity (TDS) and temperature of water and aqueous solutions in various industries and national economy. Control of chemical water treatment at thermal power facilities. Control of surface waters at a depth of up to 20 meters. Control of distilled water according to GOST 58144-2018 "Distilled water. Technical conditions". Control according to GOST 26423-85 "Soils. Methods for determining the specific electrical conductivity, pH and dense residue of water extract". 24-month warranty for deliveries across the Russian Federation IP65 The compact sealed device is reliably protected from dust and moisture Electronic notebook Ability to record up to 100 measurement groups in User-named folders Stainless steel Submersible sensor The ability to measure at a depth of up to 20m Graphic indicator with backlight Indication of readings in a user-friendly format Low power consumption Up to 600 hours of operation from a set of AA type elements

Productivity, thousand tab./hour 160 Number of stations 31 Max. pressing force, tn 10 Number of threads 2 Diameter of tablets, mm 6-25,4 Height of tablets, mm 1.5-9 Matrix filling depth, mm 18 Rotor material steel 40x13 Filling hopper capacity, l 20(30) Stepless rotor speed change The change in the speed of rotation of the feeder is independent Supply voltage 380V, 50Hz Power consumption, kW/hour 4.18 Weight, kg 2200 Dimensions, mm 900x900x1800

Productivity, thousand tab./hour 209 Number of stations 41 Max. pressing force, tn 10 Number of threads 2 Diameter of tablets, mm 6-20 Height of tablets, mm 1.5-9 Matrix filling depth, mm 18 Rotor material steel 40x13 Filling hopper capacity, l 20(30) Stepless rotor speed change The change in the speed of rotation of the feeder is independent Supply voltage 380V, 50Hz Power consumption, kW/hour 5.78 Weight, kg 2400 Dimensions, mm 900x900x1800

Description of the cable searcher Success KBI-309K • – Traceroute receiver in the form of a monoblock with a large LCD display. • – The image of the route on the device screen. • – Automatic calculation and display of the depth of the communication up to 10 m, as well as the current in the line. – Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. – "Probe" mode for tracing NON-METALLIC communications using an in-tube generator (optional).

Laser modules of the KLM-A980-5-5 series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.

An oxygen plant is a set of special equipment designed for the production of oxygen from atmospheric air by short–cycle non-heating adsorption. Composition of a typical oxygen plant: Air compressor Dehumidifier Main Filter Block Air receiver Oxygen Adsorption Generator Oxygen receiver

Laboratory heating plate with glass-ceramic surface and two independent heating sections. The size of the heating surface: 600x500 mm. Heating temperature: up to 450 °C. It has two modifications: with built-in and remote control unit.

Allows you to accumulate 30 liters of injection water. It is equipped with a heating and recirculation system, a temperature control meter, as well as special air bactericidal filters through which contact with the atmosphere is carried out. The automation system regulates the operation of the pump and heating elements and provides automatic shutdown of the distiller when filling the tank. It consists of 100% stainless steel, which allowed for a long service life. Overall dimensions (LxWxH) 1015×510×1000 mm Weight 44 kg

The LOIP LT-124a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current +10 ... +100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 24 The working fluid is water, water-glycerin mixture. The open part of the bath / depth, mm 360x296/200 Overall dimensions, mm 535x335x420 Weight, kg 14.2

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Two workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel tub with a volume of 7 liters and a depth of 160 mm. The volume of the bath is 7 liters Overall dimensions 515x360x710 mm The open part of the bath is 295x145 mm Bath depth 160 mm Weight 7.5 kg Power consumption 2.5 kW

Operating temperature range -20...+10 °C. Instability of maintaining the set temperature ± 1 ° C. The total volume of the chamber is 65 l Overall dimensions 760x700x850 mm Weight 70 kg Power consumption 500 W