Equipment

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing devices under low pressure conditions under various temperature conditions.

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. One workplace with a diameter of 110 mm with five steel O-rings, a tripod and a foot with a clip. Stamped steel tub with a volume of 6 liters and a depth of 160 mm. Bath volume 6 l Overall dimensions 405x345x710 mm The open part of the bath is 235x130 mm Bath depth 160 mm Weight 6.5 kg Power consumption 2.5 kW

WB series baths can be used for sample evaporation, incubation, defrosting, conduction of chemical reactions. Temperature setting range, oC +35…+95 Temperature error, oC ±1.0 is protected from excess temperature RAINBOW TSR-150S F-C Hydraulic thermostat Supply voltage, V 230+-10% Current consumption 6.5A Power consumption, 1500 W Overall dimensions L x W x H, mm 450 x 325 x 260 Overall dimensions of the bath L x W x H, mm 360 x 300 x 205 Total / engine capacity, 21.9/18.1 l

DPSS lasers of the KLM-593/x series are diode-pumped solid-state lasers of the visible spectral range (593 nm) with collimated continuous radiation of low and high power (depending on the model). The package includes: a laser head, a power supply, a set of connecting wires, a power cable and a device passport. Depending on the tasks, the following options are available for each laser model: the presence of TTL modulation / the presence of analog modulation, power control via the power supply, the presence of a display for the power supply, improved power instability (<3% / <1%), improved temporary power instability (4 h / 8 h), radiation sweep in-line (5...120°), laser head with fiber output (FC/SMA), extended warranty period, custom housing development. These lasers are widely used in medical equipment, for control and automation of technological processes, in scientific research, astronomy, spectroscopy. They are optimal sources of coherent radiation for the construction of systems of alignment and marking devices.

Technical characteristics: NIP, G120 Discreteness, g0,0001 External calibration The smallest weighing limit, g0.01 Diameter of the scale bowl, mm91 The price of the verification division, mg1 The limits of permissible error in the weighing intervals during verification, mgot 0.01g to 50g incl. ± 0.5; sv. 50g to 120g incl. ± 1.0 according to GOST OIML R 76-1-2011 Accuracy class according to GOST OIML R 76-1-2011I special The actual typical error limits of the scales, mg * ± 0.3 in the entire range The time of setting the readings, seconds, no more - fast mode - 2; - standard mode - 6 Overall dimensions of the scales (LxWxH), mm356x213x338 Weight of the scales, kg, not more than 6.0 Adjustment weight 100gE2* 7 years warranty

Capacity: 1.0 l/h The quality of the produced water: FS.2.2.0020.18 " Purified water" Type of current, frequency, voltage: alternating single-phase, 50 Hz, 220 V Power consumption: 0.75 kW Overall dimensions (L×W×C), mm: 230x250x365 Weight: 3.9 kg Warranty period: 14 months from the date of sale

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 180 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 690x660 mm Weight 20 kg

Measurement in the main and flow modes of electrical conductivity (UEP, UEP25, UEP20), electrical resistivity (UES, UES25, UES20), salinity and temperature of aqueous media, including "ultrapure". Control of water-chemical regimes at thermal and nuclear power facilities. Two independent measurement channels | Freely programmable measurement ranges. The possibility of independent measurements at two points. Convenience and accuracy of measurement, minimum maintenance | Medium temperature up to 130 ° C, pressure up to 1.6 MPa. Double automatic thermal compensation in the range from 0 to 100 °C. The possibility of placing the converter unit at a remote distance from the sampling point | Up to 1000 meters. Communication with external devices | Galvanically isolated current outputs 0-5/4-20/0-20 Ma. RS 485 port. MODBUS RTU exchange protocol. Three relays of "dry" contacts in each channel. Durable aluminum housing IP65 | The device is reliably protected from dust and moisture.

The electric drying cabinet vacuum-compression SNVS (autoclave) is designed for vacuum degassing of epoxy compounds, for pouring and impregnating electric elements at elevated temperatures in vacuum and under pressure, as well as for carrying out various technological processes that do not contradict the technical characteristics of the equipment

Designation VCHV-20 Cooling capacity at Two.water= +15C, Tcond=+45C, Current.cp.=+30C, kW 20 Required pump capacity, m3/h 4,5 Pressure loss in the heat exchanger, kRa 60

The vacuum injection unit is designed for vacuum impregnation with an epoxy compound followed by its curing (polymerization) in a gas environment at elevated pressure and temperature up to 110 ° C.

Designation SNO 30/17 Rated power Pmax, kW 12 Power supply voltage U, In 3 phases + N+PE 380 Maximum operating temperature T slave, oS 1700