Equipment

Design features: Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step Manual heating mode with timer with sound notification and auto-off; Durable ceramic muffle; Closed heaters on four sides of the chamber; Backlit graphic display; Conveniently located control panel; Automatic shutdown of heating when opening the door; Sound and light alarms; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to the maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x110x190 mm Overall dimensions, WxHxD, not more than mm 505x565x565 Rated supply voltage, 220 V Rated power, W 2800

A vacuum condenser type trap with a capacity of 2 liters is designed to condense vapors of non-aggressive gases on the internal cooled surfaces of the trap, in order to prevent them from entering the pump.

The furnace SNOL-4.4,4.3,4/2,0 And-SB is designed to determine the aging of bitumen under the influence of high temperature and air at temperatures up to 200 ° C in accordance with GOST 33140-2014, DIN EN 12607-1, ASTM 2872-12 with forced air convection in stationary conditions. The furnace can be equipped with an air humidity sensor for other types of tests.

Laboratory heating plate with glass-ceramic surface. Allows for heat treatment when temperature and heating time are controlled. The size of the heating surface: 280x220 mm. Heating temperature: 40-500 °C. It can be equipped with a tray for a sand bath.

The LOIP LT-108a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 8 The working fluid is water, water-glycerin mixture. The open part of the bath / depth, mm 120x150/200 Overall dimensions, mm 180x335x420 Weight, kg 7.3

It is designed to maintain the set temperature of the liquid coolant circulating in the inner bath. Welded stainless steel bath with a volume of 40 liters. The operating temperature range is +20...+150 °C. Bath volume 40 l Overall dimensions 570x380x550 mm The open part of the bath is 290x290 mm Bath depth 300 mm Weight 24 kg The power consumption is 2.5 kW.

Measurement of dissolved oxygen concentration and temperature of aqueous media, including deaerated ones. Operational control of water-chemical regimes at thermal and nuclear power facilities.Convenience and accuracy of measurement | Automatic temperature and barocompensation. Automatic air oxygen calibration. Long-lasting sensor | The service life of the sensor is at least 10 years. High contrast LCD indicator | Low power consumption | Up to 2000 hours of continuous operation from a set of AA type elements

Designation SHUP-40-1 Switching power, kW 40 Automatic switch, A 80 Supply network voltage, V/Hz 380

Spherical type vacuum furnace with bottom loading ESQVE-13.0.3.0/9.5SHM12 is designed for heat treatment of titanium rings at temperatures up to 950 degrees and vacuum up to 1x10-3mm Hg.

Designation SNO 5/17 Rated power Pmax, kW 5 Power supply voltage U, In 3 phases + N+PE 220 Maximum operating temperature T slave, oS 1700

The volume of the heated flask, 250 ml Maximum heating temperature, °C 400 Dimensions, mm 270x310x140 Power, W 320