Equipment

Vacuum membrane pump PL.HM01.02.8 Primelab is an effective laboratory device for creating a vacuum, pumping gases and vapors. It has high productivity (38 l/min) with a maximum residual pressure of 8 mbar. The PL.HM01.02.8 Primelab pump is suitable for working with chemically active and toxic substances, since the chambers are made of fluoroplastic, and all elements and parts have a fluoroplastic coating. In this case, the valves are made of FFKM. The device has a light weight of 8 kg and compact dimensions (321.5x160x200 mm), allowing it to be placed in an already equipped space. Supplied in a complete set sufficient for quick assembly and start of work.

The NTM-Terminal block is a multifunctional device that allows you to choose: the necessary antenna-converter, operating mode, measurement procedure in relation to the object of examination, recording of measurement results.

They are designed for carrying out various technological processes at temperatures from 40 to 500 oC, in vacuum up to 1x10−3 mmHg, or in an inert gas of high purity. They are used for drying, light annealing, aging, low and medium tempering in an oxidizing environment, degassing of ferrous and non-ferrous metals (including copper and copper alloys), or any other materials processed under similar conditions. The program setting of heat treatment modes including vacuuming, high purity inert gas intake with repeated vacuuming allows heating in an oxidizing environment with high purity of the surfaces of the processed parts, without scale formation and oxidation.

It is designed to determine the absolute vapor pressure of crude oil and petroleum products with a saturated vapor pressure over 180 kPa (except for liquefied petroleum gases) in accordance with the State Standard 1756 and the State Standard 31874 (except for method B). The ratio of volumes of air and liquid chambers within 3.95 4.05.

SFP+ Direct Attach Cable manufactured by Optronic is a passive Twinax cable with a length of 1 to 5 meters, the operating data transfer rate is up to 10 Gbits. SFP+ DAC are compatible with Ethernet equipment of such brands as Cisco, Extreme, Juniper, HP, Dell, Force10, Huawei, Dlink, etc.

The stirrer is designed for uniform mixing of reagents inside the container due to the rotation of the magnetic element (armature) with the function of heating the container with liquid. The mixer operates in the speed range from 200 to 1500 rpm, the maximum heating temperature of the working surface is 500 °C. The heating plate includes a stainless steel base and a fireproof glass work surface. At temperatures above +550 °C, automatic overheating protection is triggered and turns off the heating. The device is equipped with an LCD screen to display set and actual temperatures, rotation speeds and additional animated icons.

The TM-75 top–drive agitator is an innovative development of the Russian company Primlab, which specializes in the creation and manufacture of laboratory equipment. It is designed for mixing liquids of different volumes and viscosities with the ability to set the rotation speed of the nozzle. In terms of its functionality and technical characteristics, it surpasses most of the similar equipment. Despite its compact dimensions, the agitator has many advantages. The main ones are: Mixing of samples with a viscosity of up to 50,000 MPa*s; Mixing of samples with a volume of up to 40 liters (water); Maximum torque, Ncm - 90; Several modes of operation: mixing clockwise and counterclockwise (reverse); Powerful brushless motor (75W); Large range of shaft rotation speed – from 20 to 2200 rpm. It is permissible to change the rotation speed without stopping the agitator; A seven-segment indicator that displays information about errors

It is designed for thermostating samples of natural and drinking water for organoleptic assessment of odor intensity in accordance with GOST R 57164 and for determining the odor of natural and treated wastewater in accordance with RD 52.24.496. A cooling heat exchanger installed in one of the working baths, when connected to a water supply or a flow cooler, allows you to maintain the temperature in this bath +20 ° C while the other working bath has a temperature of +60 ° C, which meets the requirements of GOST R 57164. The volume of the bath is 5 liters Overall dimensions 400x400x350 mm The open part of the bath is 295x145 mm Bath depth 110 mm Weight 12 kg Power consumption 2.5 kW

Device indicators: — minimum diameter of a concentric circle, mm — ( 72 ); — maximum diameter of a concentric circle, mm — ( 250 ); — the distance between the circles of the cone, mm — ( 5 ); — height of the sampling cone, mm — ( 60 ); — upper inner diameter of the sampling cone, mm — ( 37 ); — lower inner diameter of the sampling cone, mm — ( 70 ); — measurement error, mm — ( +2.5 ); — overall dimensions of the cone, mm — ( 280x120 ); — the mass of the cone, kg — ( 4 ).

The wide-range IR microscope of the MICRAN series, connected to the FT-801 and Infralum FT-801 Fourier spectrometers, is designed to study samples from 10 microns in size, including heterogeneous in composition. When working on an IR microscope, the operator has the opportunity to observe the object under study with a magnification of over 200X both using binoculars and on a monitor using a digital video camera, during photometry, select a local area of arbitrary shape with the help of diaphragms, and also “scan” the surface of the sample, observing the spectrum obtained in real time.

Bath name: UZK-10; Body overall dimensions, mm: 400x265x390; Working capacity size: 300x240x200; Basket size: 225x175x150; Volume, l: 10; Power, W: 570; Ultrasound power, W: 260;

Technical specifications: Acceleration temperature up to 400°C Supply voltage 220 V Power consumption, no more than 750 watts Overall dimensions 450x450x535 mm Weight 20 kg