Equipment

• Description of the TECHNOAS Non-destructive Testing Laboratory o – Visual and measuring control. o – Ultrasonic control for detecting the coordinates of the violation of continuity and uniformity of the material, measuring the area of the defect. o – Eddy current control for detecting surface and subsurface defects, fatigue stratification, corrosion, and destruction. o – Radiographic inspection of pipeline welded joints. o – Devices and materials of capillary and magnetic powder flaw detection for the detection of cracks, corrosion ulcers, non-metallic inclusions and other violations.

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. One workplace with a diameter of 110 mm with five steel O-rings. Stamped steel tub with a volume of 6 liters and a depth of 160 mm. Bath volume 6 l Overall dimensions 325x195x360 mm The open part of the bath is 235x130 mm Bath depth 160 mm Weight 6.5 kg Power consumption 2.5 kW

A set of hardware and software is designed to measure physical and chemical quantities when monitoring the parameters of objects and the environment A set of hardware and software tools allows to control the parameters of objects and the environment by visually observing the readings of the data logging unit Technical specifications: Main technical characteristics 1 Air temperature and humidity control module: measurement of ambient temperature.……………..……... from -30 ° C to +60 °C; measurement of the relative humidity of the environment.......... from 10% to 100 %; 2 Differential pressure monitoring module: measuring range..................................................................... from 0 to 700 kPa; 3 PH level monitoring module: measuring range......................................................................... from 0 to plus 12 pH units; 4 Light control module: measuring range..........................................................……………. from 5 to 65000 lux; 5 Distance control module: measuring range.......................................................………………. from 0.04 to 4 m; 6 Rotation angle and angular velocity control module: rotation angle measurement range................................................ from 0 ° to 360 °; angular velocity measurement range ......................................... from 0 °/s to 2000 °/s; 7 : Optical density control module for solutions: measuring range.................................................................... from 0 to 4.8 units of optical density; 8 Module for monitoring the electrical conductivity of solutions: measuring range........................................................................... from 0 to 10 mSm/cm; 9 Data registration unit: - USB 2.0 port; - built-in color display based on the TFT LCD module, diagonal size 4”; - touch panel.

DPSS lasers of the KLM-532/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.

The pyrolyzer is designed to simulate the pyrolysis process and synthesis gas production technical specifications Reactor operating temperature range, 0C 20÷1100 Reactor inner diameter, mm 22 Reactor length, mm 1350 Thermocouple pocket availability Length of the isothermal zone, mm 700 The type of furnace is Casement Number of thermostatically controlled independent zones 1 The discreteness of the temperature setting, 0C 1 The flow range of the liquid pump, ml/min 0.0048÷36 Supply voltage 220V 50Hz Power consumption not more than 3.3 kW The discreteness of the temperatures and flow rates displayed on the displays is 0.1 Installation weight without cabinet, kg 100 Overall dimensions, mm 1400 x 400 x 1250 Weight, kg 60

Technical specifications: Temperature range: without external cooling, °C Current+10 ... +150 with tap water cooling °C Tvods+5 ...+150 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 2000 Pump: max. flow rate, l/min 8,0 pressure, 0.25 bar Bath volume, l 11 Working fluid water, water-glycerin mixtures, silicone oil Open part of the bath / depth, mm 105x296/200 Overall dimensions, mm 268x335x400 Weight, kg 11.5

The GSH-3 hardware and software complex is designed for verification of analog and digital measuring channels of the chromatograph and analog-to-digital converters (ADCs) intended for automation of old chromatographs. The device can be used in various sectors of the national economy, in factory and research laboratories. technical specifications The resolution and sampling rate of 1 DAC is 20 bits 10 Hz. The resolution and sampling rate of 2 DACs is 16 bits 20 Hz. The amount of ROM memory is 512 KB. The voltage output range (1 output) is from 0 to 5V. The current output signal range is from 1×10-14 to 1×10-7 A (2 outputs in the range of positive and negative voltages). The relative deviation of the average steady—state value of the current or voltage of the output channel from the set value is not more than 2%. The linearity error ±1 LSB (the least significant bit) is ± 4×10-7 V. Power consumption (without a personal computer), no more than — 10 VA. Overall dimensions (width × depth × height), not more than — 230×220 × 75 mm. Weight, not more than 1.4 kg.

The 3VVN1-3M(N) water ring vacuum pump with a capacity of 3.5 m3/min at an initial pressure of 0.04 MPa is designed for general industrial use, to create and maintain a vacuum in the operating pressure range from atmospheric to 10 kPa. The working fluid of the pump is water. The use of the 3VVN1-3M(H) pump for pumping out water-gas mixtures is allowed only if the bulk of the water is separated and discharged at the pump entrance. Failure to comply with this requirement may lead to unacceptable overload of the engine and destruction of the pump's working organs. The 3VVN1-3M(H) water ring vacuum pump is not intended for use in fire and explosion hazardous industries. The 3VVN1-3M(H) vacuum water ring pump is manufactured in the climatic version of UHL 4 and O4 (i.e. for moderate and cold climate) according to GOST standard 15150-69, meets the requirements of technical specifications TU 3648-053-00218526-2013, designed and manufactured taking into account the requirements of GOST R 52615-2006.

The LOIP LT-417b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.01 The error of setting the set temperature, not more than, ° C ± 0.02 Heater power, W 2200 Pump: max. flow rate, l/min 6...12 pressure, 0.4 bar Bath volume, l 17 The working fluid is water, silicone oil. Open part of the bath / depth, mm 360x296/150 Overall dimensions, mm 532x335x350 Weight, kg 14.4

The characteristics of the device are similar to the GVCH-12D model; the difference is in the absence of a reactor to remove traces of oxygen and the capacity, respectively, is 6 liters/hour (100 ml/min). Optionally equipped with a reactor for using hydrogen as a carrier gas. Technical specifications Purity of hydrogen in terms of dry gas is about 99.995% Concentration of water vapor at 20 °C and 1 atm is no more than 5 ppm In the output pressure stabilization mode The range of the specified output pressure of hydrogen is from 1.5 to 6.1 ati Stability of the output pressure of hydrogen is not worse than ± 0.02 ati Maximum hydrogen capacity reduced to normal conditions is 6 l/h The time of setting the operating mode, with the output turned off is no more than 20 minutes In the performance stabilization mode: The range of the specified hydrogen performance is from 0 to 6 l/h Maximum developed pressure in performance mode is 5.0 ati Volume of distilled water to be poured is 1.0 l Distilled water consumption is no more 0.01 l/hour Water consumption is 1.6 g/l of hydrogen The average life of a replaceable deionization filter cartridge (at maximum performance and single-shift operation) is at least 1 year Average power consumption: in stationary mode is no more than 80 VA maximum (at startup) is no more than 100 VA Overall dimensions of the generator, (width x depth x height) are not more than 230x470x450 mm The mass of the generator is not more than 15 kg Operating conditions: ambient temperature, °C, from +10 to +35 powered by single-phase AC voltage, V, 220 (+10 -15)% and frequency, Hz 50 ± 1 The generator for electrical safety meets the requirements of Class 1, type H according to GOST 12.2.025-76