Equipment

Laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10) includes: 1. Test facility – Maximum rectified voltage up to 70 kV; – Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV. 2. Burning facility – Maximum voltage up to 30 kV; – Maximum current up to 80 A; – Working hours are not limited; – Switching stages is carried out without breaking the arc at the time of switching; – The ability to start working from any stage of burning (when working with low–voltage cables); - Built-in afterburning. 3. High voltage pulse generator • – Output voltage 0...12 kV / 0...24 kV; • – The pulse energy at each stage is 3000 J; • – Built-in IDM for collaboration with the reflectometer. 5. High-voltage cable defects detector • – Determining the location and depth of the cable at a depth of up to 10 m; • – Tracing at a distance of up to 10 km; • – Search for live electrical cables; • – Search for places where the pipeline and cable intersect; • – Determining the places of damage to cable lines; • – Site surveys before excavation; • – Search for places of damage to the external insulation of the cable; • – GPS\GLONASS coordinates recording and mapping of found communications; • – Cable selection from the bundle; • – Search for the place of damage by acoustic method. 6. Autonomous air heater Planar – An autonomous air heater Planar with a capacity of 2 kW or an analog with a 7.5 l fuel tank.

• Designed for: • – detection of depressurization sites of underground pipelines of heat, water, gas, oil supply systems located at a depth of up to 3 m in channel and without channel laying. • – traces of hidden communications (cable lines, pipelines) in passive mode. • – surveys of the excavation area (before opening the route for the presence of cables, pipelines that complicate excavation).

Optical transceivers are in standard SFP metal cases with separate optical input/output for LC type connectors to transmit the signal over two optical fibres

Technical characteristics: NIP, G410 Discreteness, g0,01 External calibration The size of the scale bowl / platform, mm116 The smallest weighing limit, g0.2 The limits of the permissible error during the initial verification, mgot 0.2g to 50 g incl. ±5; sv. 50g to 200g incl. ±10; sv. 200g to 410g incl. ±15 in accordance with GOST OIML R 76-1-2011 Accuracy class according to GOST OIML R 76-1-2011II is high Weight adjustment 200gF2* The time of setting the readings, s, no more than ~ 1 - 1.5 7 years warranty

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 10 liters and a depth of 200 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. The volume of the bath is 10 liters Overall dimensions 400x275x480 mm The open part of the bath is 120x200 mm Bath depth 200 mm Weight 14 kg Power consumption 2.2 kW

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Two workstations with a diameter of 110 mm with five steel O-rings. Stamped steel tub with a volume of 5 liters and a depth of 110 mm. The volume of the bath is 5 liters Overall dimensions 385x205x310 mm The open part of the bath is 295x145 mm Bath depth 110 mm Weight 7 kg Power consumption 2.5 kW

The volume of the bath is 5 liters Overall dimensions 420x280x500 mm The open part of the bath is 230x235 mm Weight 7.5 kg

A power supply for red laser modules.

Technical characteristics: NIP, G1100 Discreteness, g0.05/(0.02)* Internal calibration The size of the scale bowl / platform, mm175 x 145 The smallest weighing limit, g2.5 Limits of permissible error during primary verification, mgot 2.5g to 500g incl. ±50; sv. 500g to 1100g incl. ±100 according to GOST OIML R 76-1-2011 Accuracy class according to GOST OIML R 76-1-2011II is high The weight adjustment is built-in The time of setting the readings, s, no more than ~ 1 - 1.5 7 years warranty

Primelab sand sauna, not included in delivery. Supplied separately. High-tech and productive magnetic stirrer with heating PL-HR-Steps, 20 liters, designed for laboratories of various profiles, including research and production purposes. The stirrer can mix at speeds up to 1500 rpm and heat up to +550 °C. The working platform is made of stainless steel, and the top covering is made of chemically resistant refractory glass (glass ceramics). The heated magnetic stirrer PL-HR-Steps has expanded functionality compared to the Basic modification. The Steps modification allows users to create and run their own special programs based on a graph of temperature and rotation speed versus time. The user can create a program by specifying a set of parameters for each step, including step duration, set temperature and rotation speed. The program subsystem provides flexible control of the heating and mixing process. The main functionality of the subsystem includes: • number of program steps from 1 to 5; • maximum step duration up to 990 minutes; • possibility of manual control control during program execution; • ability to run 1 program (heating/rotation). The PL-HR-Steps stirrer does not support "Gentle heating" modes. The user selects temperature, speed and time settings using two round knobs. The digital display shows the set and actual characteristics, as well as icons of the processes and functions being performed. The set parameters are saved in non-volatile memory. After heating is turned off, a warning about a hot platform is displayed on the screen. There is protection against overheating: at +550 °C the electric heating element automatically turns off. The stirrer is compatible with the PT1000 temperature sensor. The device is equipped with an armature failure monitoring function: if the rotation stops, the electric motor restarts. Main characteristics: • Orange color • Protection class (according to DIN EN60529): IP21 • Working surface of the platform: fireproof glass (glass ceramics) • Number of mixing places: 1 • Maximum volume of mixed liquid: 20 l • Motor power: 16 W • Range of operating speeds of the motor shaft: 50-1500 rpm • Discreteness of setting the specified rotation speed: 10 rpm • Maximum platform heating temperature: 550 °C • Resolution of setting the set temperature: 1 °C • Temperature maintenance accuracy: 1% • Power consumption: 1020 W • Overall dimensions LxWxH: 350x220x120 mm • Platform working surface size LxW: 200x200 mm • Device weight: 4.4 kg Primelab sand sauna, not included in delivery. Supplied separately.

A frost-resistant kit with a powerful generator that solves problems on metal and non-metallic pipelines designed for: • – search for underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), as well as determining the depth of their occurrence and places of damage. • – determination of the location of power cable lines by induction and acoustic methods. • – high-range tracing and highly efficient search for cable damage sites. • – tracing of non-metallic and metallic pipelines by acoustic method and search for leaks from pipelines.