Catalog
Back to search results
Measuring air-thermal installation ASESH-8-1
Back to search results
Measuring air-thermal installation ASESH-8-1
A thermogravimetric (air-thermal) method for determining the mass fraction of moisture is implemented, based on measuring the mass of the sample of the analyzed substance before and after drying, followed by calculating the values of the mass fraction of moisture.
Air-thermal measuring installations ASESH-8 are registered in the State Register of Measuring Instruments under No.58526-14, have a certificate of approval of the type of measuring instruments RU.C.31.005 And No. 56847. The installations undergo initial verification and have the appropriate certificate.
GENERAL CHARACTERISTICS
1. Convenient access to the cells of the drying chamber
On the front side of the cabinet there are four doors for access to the cells.
2. The possibility of simultaneous determination of the humidity of 8 samples
The drying chamber of the air-heat installation consists of 8 independent cells with a total capacity of 16 bucs.
3. Built-in timer
The ASESH-8-1 installation has 4 timers, by means of which the end of the drying process is monitored in each section with the output of an audible signal and a light indication.
4. Natural ventilation
The absence of rotating elements ensures absolute noiselessness of operation and a long service life.
SCOPE OF APPLICATION:
1. Crop production, agriculture and forestry.
2. Products of meat, dairy, fish, flour-milling, feed and microbiological industries.
3. Food industry products.
4. Cellulose, paper, cardboard and products made from them.
5. Medicines, chemical and pharmaceutical products and medical products.
6. Building materials.
7. Products of the logging and sawmilling and woodworking industry.
8. Soils, пground, mineral fertilizers.
Air-thermal measuring installations ASESH-8 are registered in the State Register of Measuring Instruments under No.58526-14, have a certificate of approval of the type of measuring instruments RU.C.31.005 And No. 56847. The installations undergo initial verification and have the appropriate certificate.
GENERAL CHARACTERISTICS
1. Convenient access to the cells of the drying chamber
On the front side of the cabinet there are four doors for access to the cells.
2. The possibility of simultaneous determination of the humidity of 8 samples
The drying chamber of the air-heat installation consists of 8 independent cells with a total capacity of 16 bucs.
3. Built-in timer
The ASESH-8-1 installation has 4 timers, by means of which the end of the drying process is monitored in each section with the output of an audible signal and a light indication.
4. Natural ventilation
The absence of rotating elements ensures absolute noiselessness of operation and a long service life.
SCOPE OF APPLICATION:
1. Crop production, agriculture and forestry.
2. Products of meat, dairy, fish, flour-milling, feed and microbiological industries.
3. Food industry products.
4. Cellulose, paper, cardboard and products made from them.
5. Medicines, chemical and pharmaceutical products and medical products.
6. Building materials.
7. Products of the logging and sawmilling and woodworking industry.
8. Soils, пground, mineral fertilizers.
Suppliers have this product:
Spectrophotometer UV-VIS PB2201
1 supp.
Measuring functions
Measurement of absorption, transmission, and reflection spectra
Measurement of optical density, transmission coefficient and reflection coefficient at fixed wavelengths
Determination of concentration at one, two, three wavelengths by factor, standard, schedule
Multi-wave kinetic measurements
Determination of concentration by programmed methods
Calculation of color and chromaticity coordinates
UVI spectrophotometers "SOLAR" operate in the ultraviolet, visible and near infrared regions of the spectrum. They are used in scientific laboratories, healthcare institutions, veterinary medicine, pharmaceuticals, ecology, biology, etc., in laboratories for quality control of products and raw materials in various sectors of the economy (industrial enterprises, agriculture, food industry, etc.)
Removable cuvette holders and set-top boxes
Accurate measurements
Cost-effectiveness
Touch screen
Built-in printer
Software support
SOLAR
Minsk
Produced in: Belarus, Minsk
Purka liter MEASURE
1 supp.
The principle of operation is based on measurement by filling the container for the measured product with 1 liter of grain and measuring the mass of this grain. PECULIARITIES:
1. Drop weight design no assembly required
Thanks to a fundamentally new design of the purka, the determination of nature is carried out quickly. Significantly reduced analysis time. No special training of personnel is required to work on the MERA purka.
2. Stability and reproducibility of results. The stable and repeatable movement of the knives ensures the stability of the work of the purka and an accurate, stable, reproducible determination of the nature (± 1g at 10 measurements).
3. Quick and easy cleaning
The convenient design of the device permits to clean it quickly and easily. Excess grain is removed into an empty container for the measured product by pressing the "RESET" button. After discarding the remaining grain, the purka is ready for the next measurement. The fundamentally new design of the MERA purka body and the automation of the analysis process allow you to quickly and easily get the result.
WORK ALGORITHM:
1.Fill the hopper with grain.
2.Install the empty container for the measured product into the device.
3. Press the "START" button on the control panel.
4. Weigh a container filled with 1 liter of grain and calculate the result.
5. Reset the remaining grain by pressing the "RESET" button. METROLOGICAL CHARACTERISTICS:
Indication error, g, no more than ±4.0
Variation of six dimensions, g, no more than 2.1
SPECIFICATIONS:
Overall dimensions (L×W×H), mm, no more than 600×230×620
Weight, kg, no more than 48
Power consumption, V×A, no more than 100
Supply voltage with a frequency of 50±1 Hz, V 220 (+15...-20)%
GK EKAN
Saint Petersburg
Produced in: Saint Petersburg
Foreign analogues
Chopin EM-10