Vacuum bellows valve

Designed for: – determining the location of liquid leakages from pipelines by the correlation method; – tracing underground utilities; – clarification of leakage sites by acoustic leak detector; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics.

Vacuum chambers can be used: for drying materials (low vacuum), testing spacecraft, during experiments on plasma retention and antimatter production, as elements of charged particle accelerator systems and systems for applying thin films. Vacuum chambers can be used: for drying materials (low vacuum), testing spacecraft, during experiments on plasma retention and antimatter production, as elements of charged particle accelerator systems and systems for applying thin films.

Optical transceivers are in standard SFP metal case with integrated optical input/output for SC,LC connectors for to transmit the signal over a single optical fiber.

SFP+ Direct Attach Cable manufactured by Optronic is a passive Twinax cable with a length of 1 to 5 meters, the operating data transfer rate is up to 10 Gbits. SFP+ DAC are compatible with Ethernet equipment of such brands as Cisco, Extreme, Juniper, HP, Dell, Force10, Huawei, Dlink, etc.

The "10GBASE-SR SFP+ Module" optical modules are capable of operating at a data transfer rate of up to 10 Gbit/s and are used in fiber-optic communication systems. They have a form factor similar to the previous SFP standard, namely, they have much smaller dimensions compared to other 10G transceivers. They can be installed on network equipment with a large number of ports.

DPSS lasers of the KLM-450/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes. Technical specifications Radiation output power: up to 120W Radiation wavelength: 450 nm Output beam diameter: 1.5mm Divergence of the radiation beam: 1.3 mrad Instability of radiation power: 5% Type of modulation: TTL or analog Time to enter the mode: 15min Spectral line width: 0.1nm

Designed for: use as the primary reference of the spectral power of the noise radio emission SPMSH in the frequency range 140-220 GHz; use as a source of noise signal in the mm wavelength range for use with radio equipment; measuring the noise coefficient of receivers, amplifiers, for tuning and adjusting electronic devices.

KLM-M650-16-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.

DPSS lasers of the KLM-415/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes. Technical specifications Radiation output power: up to 10W Radiation wavelength: 415 nm Output beam diameter: 1.5mm Divergence of the radiation beam: 1.3 mrad Instability of radiation power: 5% Type of modulation: TTL or analog Time to enter the mode: 15min Spectral line width: 0.1nm

The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications. As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line. Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. "Probe" mode for tracing NON-METALLIC communications using an in-line generator (optional). The kit is equipped with the latest compact autonomous generator AG-107 with built-in batteries, display and built-in induction antenna, for tracing communication in a contactless way. The output power of the generator is up to 60 watts.

Technical specifications: Voltage reproduction range Uk 200 mV 0.07 + 0.01 DC: from 50 MV to 600 V, Uk 2 V 0.05 + 0.005 sub-bands (Uk) 200 mV; 2; 20; 200; 600 V Uk 20 V 0.05 + 0.005 Basic error, ± (% of U + % of Uk): Uk 200 V 0.07 + 0.01 Uk 600 V 0.1 + 0.02 Voltage reproduction range UK 200 mV 0.2 + 0.05 AC: from 1 mV to 600 V, Uk 2; 20 V 0.15 + 0.02 sub-bands (Uk) 200 mV; 2; 20; 200; 600 V from 20 Hz to 20 kHz Basic error, ± (% of U + % of Uk): sv. 20 to 40 kHz 0.2 + 0.1 Uk 200 V; 600 V: from 40 Hz to 1 kHz 0.2 + 0.05 Power reproduction range Ik 200 Ma 0.1 + 0.02 DC: from 1 Ma to 5 A, Ik 2; 20; 200 mA 0.1 + 0.01 sub-bands (Ik) 200 Ma; 2; 20; 200 mA; 2; 5 A Ik 2 A; 5 A 0.1 + 0.02 Basic error, ± (% of I + % of Ic): AC power reproduction range: from 10 Ma to 5 A sub-bands (Ic) 200 Ma; 2; 20; 200 mA; 2; 5 A 0.15 + 0.05 Frequency range from 20 Hz to 1 kHz Basic error, ± (% of I + % of Ic): USB interface Operating temperature range from minus 10 °C to + 50 °C Dimensions; weight 420×342×184.5 mm; 10 kg

The TECHNOAS substation laboratory consists of: Test facility • – Maximum rectified voltage up to 70 kV to 90 mA. • – Maximum AC voltage of the industrial frequency of 50 Hz to 100 kV to 175 mA. The IDP-10 dielectric loss meter unit is based on the Tangent-2000 meter and includes: • – Power transformer parameter meter. • – Measurement of losses and current XX. • – Measurement of short circuit losses and voltage. • – Determination of the transformation coefficient and the winding connection group. • – Measurement of the resistance of the windings to direct current. • – Formation of the test report. A milliohmmeter Measures DC resistance in inductive and non–inductive circuits in the range of 1 µΩ ÷ 10 kΩ at a current of 10A, as well as makes oscillograms of switching the contactor of a high-speed RPN device.

Irradiator with a typical collimator Rotary drum magazine sources in tungsten and lead protection Software control of the movement of sources and positioning of the mobile platform An alarm and blocking system, radiation monitoring system to ensure the safety of the installation Control from the operator panel or computer with verification automation functions

Logging data on dose rate levels and exceeding threshold levels Software that allows you to display on a PC monitor the current radiation situation at a controlled facility Backup power supply High radiation resistance – at least 50,000 Sv for UDKG-37 Failure diagnostics The possibility of using the system for dosimetric monitoring of both pulsed and continuous gamma radiation The possibility of using the DKS-AT1123 dosimeter autonomously as a wearable device

The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications. As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line. Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. Compact stand-alone generator with display and built-in induction antenna. The output power of the generator is up to 20 watts and the range of operation is up to 3 km. Connection to the desired route is possible both by contact and contactless method.

The product is designed for heating in liquid media of salts of parts for quenching, tempering, and normalization without oxidation in the temperature range from 700 OC to 1200 oC in stationary conditions. The environment of the workspace is a molten salt. Salt electroplants are most often used in the heat treatment of tool steels for rapid heating for quenching and other types of processing with minimization of the decarbonized layer. The electrode salt bath functions on the basis of the conductive properties of molten salts. From the power grid, the current flows through the transformer to the electrodes dipped in molten salt, and under this influence it heats up to the desired temperature.