Language selection
Внимание! 06.04.2026 с 21:00 до 24:00 по по Московскому времени работа портала будет приостановлена для проведения технических работ. В настоящее время портал работает нестабильно.
Catalog
Back to search results
PULSE RADIATION MONITORING SYSTEM
Back to search results
PULSE RADIATION MONITORING SYSTEM
Logging data on dose rate levels and exceeding threshold levels
Software that allows you to display on a PC monitor the current radiation situation at a controlled facility
Backup power supply
High radiation resistance – at least 50,000 Sv for UDKG-37
Failure diagnostics
The possibility of using the system for dosimetric monitoring of both pulsed and continuous gamma radiation
The possibility of using the DKS-AT1123 dosimeter autonomously as a wearable device
Software that allows you to display on a PC monitor the current radiation situation at a controlled facility
Backup power supply
High radiation resistance – at least 50,000 Sv for UDKG-37
Failure diagnostics
The possibility of using the system for dosimetric monitoring of both pulsed and continuous gamma radiation
The possibility of using the DKS-AT1123 dosimeter autonomously as a wearable device
DOSIMETRIC INSTALLATION OF GAMMA RADIATION UDG‑AT130
Irradiator with a typical collimator
Rotary drum magazine sources in tungsten and lead protection
Software control of the movement of sources and positioning of the mobile platform
An alarm and blocking system, radiation monitoring system to ensure the safety of the installation
Control from the operator panel or computer with verification automation functions
Atomtekh
Minsk
Produced in: Belarus, Minsk
PEDESTRIAN RADIATION MONITORS (SRK‑AT2327)
Detection of gamma and neutron radiation sources in the flow of pedestrians crossing the border of the controlled object.
Rapid adaptation to changes in the radiation background
Audible and light alarms
The possibility to create a network of MCI (up to 32) under the control of a PC and specialized software
High reliability and self-control
Backup power supply
At the request of the user, the MCI can be supplied without a neutron channel.
Atomtekh
Minsk
Produced in: Belarus, Minsk
SRK‑AT2327 ALARM METER WITH INFORMATION BOARD
Logging data on dose rate levels and exceeding threshold levels
The possibility of placing the detection unit and the temperature sensor at a distance of up to 1 km separately from the scoreboard
Additional protection from direct exposure to precipitation
Atomtekh
Minsk
Produced in: Belarus, Minsk
UPN‑AT140 NEUTRON RADIATION CALIBRATION UNIT
The field of fast and thermal neutrons in a collimated beam
Fast neutron field in “open” geometry using a screening cone according to ISO 8529-2
Drum source magazine with polyethylene and concrete protection at a depth of 1 meter
Software control of the movement of sources and positioning of the mobile platform
An alarm and blocking systems, radiation monitoring
Control from the operator panel or computer with verification automation functions
Atomtekh
Minsk
Produced in: Belarus, Minsk
DOSIMETRIC INSTALLATION OF GAMMA RADIATION UDG‑AT110
Irradiator with a typical collimator
Rotary drum magazine sources in tungsten and lead protection
Software control of the movement of sources and positioning of the mobile platform
An alarm and blocking system, radiation monitoring system to ensure the safety of the installation
Control from the operator panel or computer with verification automation functions
Atomtekh
Minsk
Produced in: Belarus, Minsk
SPECTROMETRIC RADIATION MONITORING SYSTEM
Displaying the spectra and dose rates measured by each detection unit (DB) on the object plan or terrain map
Identification of the radionuclide composition of the source
The possibility of expanding the energy range up to 5 MeV
Sealed DB design (IP68)
Backup power supply
Atomtekh
Minsk
Produced in: Belarus, Minsk
X‑RAY CALIBRATION INSTALLATIONS UPR‑AT300, UPR‑AT300/1, UPR-AT300/2
Storage and transfer of kerma units in the air, ambient, individual and directional dose equivalents and their X-ray radiation capacities to working standards and measuring instruments.
▪ The use of highly stable ISOVOLT X-ray machines with metal-ceramic tubes
▪ Field shaper with radiation qualities according to GOST 8.087, ISO 4037, IEC 61267, etc.
▪ Replaceable discs with 11 filter slots; 3 replaceable diaphragms
▪ Additional filters up to 50 mm thick
▪ A protective flap made of tungsten with beam attenuation of more than 1000 times and a response time of less than 0.1 s
▪ A camera monitor and an electrometric unit provide monitoring of the presence and stability of the radiation output
▪ A positioning system in the radiation beam along three axes
▪ A laser detector centering devices
▪ A video surveillance system of indications
▪ Alarm and blocking systems, radiation monitoring
▪ A control system using operator panels and PC
Atomtekh
Minsk
Produced in: Belarus, Minsk
RADIATION PEDESTRIAN MONITORS MPP‑AT920V, MPP‑AT920R (SRK‑AT2327)
Rapid adaptation to changes in the radiation background
Audible and light alarms
The possibility to create a network of MCI (up to 32) under the control of a PC and specialized software
Mobility and the possibility to organize the control of passages in a short time
High reliability and self-control
Backup power supply
Atomtekh
Minsk
Produced in: Belarus, Minsk
RADIATION TRANSPORT MONITORS (SRK‑AT2327)
Modular principle of system construction
Automatic correction of threshold levels when the background level of the environment changes
High reliability and self-control
Backup power supply
Automatic data logging
The possibility of connecting a video surveillance system
Atomtekh
Minsk
Produced in: Belarus, Minsk
DOSIMETER‑RADIOMETER MKS‑AT1117M WITH DETECTION UNIT BDKN‑06 AND A SET OF RETARDER SPHERES
The result of determining the energy distribution of the neutron radiation flux density is used to calculate such quantities as:
- integral neutron flux density;
- the average energy of neutron radiation in the spectrum;
- the average neutron radiation energy by dose;
- dose equivalent per unit flow density;
- dose equivalent;
- effective dose.
▪ Methodological support of measurements
▪ It is possible to supply an expanded set of polyethylene retarder spheres with diameters: 3,5”; 4,5”; 5”; 7”; 9”; 9,5”
Atomtekh
Minsk
Produced in: Belarus, Minsk
SRK‑AT2327 ALARM METER
Building a flexible and reliable multi-channel system
Independent measurements on each channel in a wide range of gamma and neutron radiation dose rates and neutron and beta particle flux densities
Audiable and light alarms
High reliability and self-control
Software that allows you to display on the PC monitor the current radiation situation in the controlled area
Data logging
Backup power supply
The possibility of integration with external security systems
Atomtekh
Minsk
Produced in: Belarus, Minsk
INSTALLATION OF DOSIMETRIC BETA RADIATION UDB‑AT200
Transmission of units of absorbed dose, directed, individual dose equivalents and their beta radiation power as part of the working standard of absorbed dose (PD) and absorbed dose power (MPD) of beta radiation in a tissue equivalent substance.
▪ Use of closed radionuclide beta radiation sources 90Sr+90Y (BIS-50, 22 GBk), 85Kr (KAC.D3, 15 GBk) and 147Pm (BIP-50, 10 GBk)
▪ Formation of a reference field from sources by a mobile emitter unit using smoothing filters
▪ Source holders with shutter and protective screens
▪ Calibrated length rods and laser device for centering and digitizing
▪ A video surveillance system of readings
▪ The possibility of using an automated extrapolation chamber as part of the installation to reproduce the absorbed dose (absorbed dose rate) of beta radiation in the tissue
▪ Measurement of ionization currents from 1 fA when using an extrapolation chamber and a precision electrometer
▪ Software for installation operation, calibration and calculations
▪ An alarm and blocking system, control of photon radiation levels in the measurement room and operator room
Atomtekh
Minsk
Produced in: Belarus, Minsk
EMERGENCY DOSIMETRIC ALARM DRG‑AT2331
Detection of SCR in all possible range of its characteristics
High reliability
Self-monitoring of components
Backup power supply
Recording and storage of measurement results in the non-volatile memory of the device
The possibility of integration with external security systems
DRG-AT2331 together with SRK-AT2327, personal computer and software "SARK.NET " allows you to form an alarm system for detecting the occurrence of a self-sustaining chain reaction (SAS SCR).
Atomtekh
Minsk
Produced in: Belarus, Minsk
RADIATION PEDESTRIAN MONITOR MPP‑AT930
▪ Rapid adaptation to changes in the radiation background
▪ Audible and light alarms when gamma radiation is detected
▪ Mobility and the possibility of forming passages
▪ Self-control of components in the process of work
▪ The possibility of continuous or episodic radiation monitoring
▪ The possibility to work from a 230V, 50Hz network or from a built-in rechargeable battery
Compliance with the international standard IEC 62244:2006
Stationary radiation monitors for the detection of radioactive and special nuclear materials at state borders
Atomtekh
Minsk
Produced in: Belarus, Minsk
Magnetic powder stationary installation MDS-09
1 supp.
NPK LUCH
Balashikha
Produced in: Balashikha, Moscow region
Optical Transceiver/WDM Gigabit Ethernet/Fiber сhannel (1250 Mbps)
from
4 951 ₽
Optical transceivers are available in 9-pin plastic cases with a combined optical input/output for SC type connectors.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
DOSIMETRIC INSTALLATION OF GAMMA RADIATION UDG‑AT130
Irradiator with a typical collimator
Rotary drum magazine sources in tungsten and lead protection
Software control of the movement of sources and positioning of the mobile platform
An alarm and blocking system, radiation monitoring system to ensure the safety of the installation
Control from the operator panel or computer with verification automation functions
Atomtekh
Minsk
Produced in: Belarus, Minsk
NEUTRON RADIATION DETECTION UNITS
Neutron radiation detection units (BDKN-01, BDKN-02, BDKN-03, BDKN-04, BDKN-05)
Atomtekh
Minsk
Produced in: Belarus, Minsk
Green DPSS Laser 526 nm KLM-526-x
DPSS lasers of the KLM-526/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Correlational leakage detector Iskor-325ND
from
758 310 ₽
It is intended for:
– determination by the correlation method of the location of liquid leakages from pipelines of household and drinking water supply, hot water supply, heating and other pipeline systems, provided that the transported medium in the pipeline is under pressure;
– tracing underground utilities;
– clarification of leakage sites by acoustic leak detector;
– diagnostics of shut-off valves;
– creation of an information database of the condition of pipelines and the results of pipeline diagnostics.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Power supply C35-80
Operating Mode: Continuous
Output stabilized current, A: 1-80
Output voltage, V: 0-35
Power supply: Three-phase 220/380 V 50 Hz
Operating temperature range, °C: +10...+35
Storage temperature, °C: -20...+45 Relative humidity (without condensation), %: 90 Weight, kg: 5.3
Overall dimensions (W x H x D), mm: 390 x 75 x 200
INZHEKT
Saratov
Produced in: Saratov
Oxygen concentrator "Provita-580M"
Devices capable of generating oxygen have found the widest application in various fields of medicine. The equipment is also used in training centers, educational institutions and oxygen rooms.
Medical oxygen concentrators make it possible to accelerate the recovery of patients suffering from cardiovascular diseases, chronic respiratory diseases, as well as other pathologies that make it difficult to saturate the blood with oxygen. This equipment is a mandatory equipment for anesthesiology and intensive care units. Oxygen concentrators demonstrate high efficiency in restorative treatment. Unlike oxygen sources, which use compressed gas, generators are characterized by high safety and efficiency
Capacity:
500-600 l/min
34.8-36.0 m3/h
46.4-47.8 kg/h
Oxygen purity: 95 %
Oxygen pressure: 4-5 bar
PROVITA
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 455 nm KLM-455-x
DPSS lasers of the KLM-455/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 120W
Radiation wavelength: 455 nm
Output diameter of the radiation beam: 1.5 mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Automated complex of metrological maintenance of radio measuring and electrical measuring equipment
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
CNC milling machine (5 axes)
from
11 000 000 ₽
CNC milling machine
Five-axis machining center for metal processing BEAVERMILL with increased precision. Occupies a little more than 2 m², provides simultaneous five-axis processing of aluminum, stainless steel and titanium with workpiece dimensions of 160 mm in diameter and 250 mm in length.
PARAMETERS VALUE Machine dimensions
Work zone Desktop Weight Working feed 1305x1855x1950 mm* ⌀ 160x250 mm ⌀ 160 mm with 4 T-slots 12 mm 2500 kg 25 m
The BEAVERMILL is designed for most mass metalworking applications and is used in aerospace, automotive, electronics, medical and other industries. CONTROL SYSTEM HNC 848 Simultaneous five-axis machining Memory 8GB Russian language High precision encoder with 16 million positions Bilateral pitch error compensation Thermal compensation Rigid tapping Remote control panel HD LCD screen 17′′ Automatic 5-axis calibration RTCP
CHIP COLLECTION TANK AND WASHING SYSTEMThe chip and coolant tank includes a coolant pump for cooling the tool and a coolant pump for flushing chips from the working area of the machine, “flush off the ramps.”
The chip collection tank is folding, allowing you to pour the chips into bags or other containers.
Fully rolls out for easy maintenance. Capacity 115 liters.
PARAMETERS VALUE Machine dimensions
Work zone Desktop Weight Working feed 1305x1855x1950 mm* ⌀ 160x250 mm ⌀ 160 mm with 4 T-slots 12 mm 2500 kg 25 m
The BEAVERMILL is designed for most mass metalworking applications and is used in aerospace, automotive, electronics, medical and other industries. CONTROL SYSTEM HNC 848 Simultaneous five-axis machining Memory 8GB Russian language High precision encoder with 16 million positions Bilateral pitch error compensation Thermal compensation Rigid tapping Remote control panel HD LCD screen 17′′ Automatic 5-axis calibration RTCP
CHIP COLLECTION TANK AND WASHING SYSTEMThe chip and coolant tank includes a coolant pump for cooling the tool and a coolant pump for flushing chips from the working area of the machine, “flush off the ramps.”
The chip collection tank is folding, allowing you to pour the chips into bags or other containers.
Fully rolls out for easy maintenance. Capacity 115 liters.
BIVER TEKH
Москва
Produced in: Moscow