Primelab

The mixer operates in a speed range from 50 to 1500 rpm, the maximum heating temperature of the working surface is 500 °C. The heating plate includes a base made of stainless steel and a working surface made of fire-resistant glass (glass ceramics). At temperatures above +550 °C, automatic overheating protection is triggered and turns off the heating. The device is equipped with an LCD screen to display set and actual temperatures, rotation speeds and additional animated icons. There is a timer for the specified operating time of the mixer; its maximum value is 990 minutes. There is a function for automatic detection of armature rotation failure. When the device detects an armature failure, the rotation stops. Then rotation resumes, but the speed is reduced by 10%, followed by restoration of the rotation speed to the user-specified parameters. A stall occurs if the armature becomes disengaged with the stirrer magnet and stops rotating. Disruption can occur for various reasons: the rotation speed is too high, the viscosity of the medium has changed during the mixing process, etc. When the power of the device is turned off, the set values of temperature, speed, timer time and the mode of detection (determination) of failure of armature rotation are stored in non-volatile memory. The armature rotation speed and heating temperature are set using two rotating knobs. Characteristics Motor power 16 W Range of operating speeds of the motor shaft, 200-1500 rpm Discreteness of setting the specified speed of rotation of the motor shaft, 10 rpm Resolution of displayed motor shaft rotation speed, 10 rpm Connection – external temperature sensor PT1000 (sold separately) Power consumption, 20 W Dimensions, weight Overall dimensions LxWxH, 380x220x120mm Working surface size, LxW, 200x200mm Maximum anchor length, 80mm Device weight 4.4 kg Contents of delivery Stirrer without heating PL-R-basic Operating manual combined with passport Anchor for stirrer in fluoroplastic sheath 8*50 mm Power cable with Euro plug

Laboratory funnel B-56-80 Primelab is designed for breaking-even transfer of substances from one container to another. It is actively used not only in laboratories, but also in industries, scientific organizations, etc. The funnel has the shape of a cone with an angle of 60° and a diameter of 56 mm with a height of the entire product of 80 mm. There is a small stem with a diameter of 8 mm.

Bunsen flask 2-500-29/32 with tube PrimeLab, XC is a reliable laboratory vessel with a flat bottom and a side tube with three olives. There is a 29/32 grind, thanks to which the flask can be connected to laboratory equipment for carrying out the necessary processes. The Bunsen flask 2-500-29/32 holds no more than 500 ml with a total height of 170 mm. The diameter of the base is 105 mm.

The PrimeLab light glass reagent jar, 250 ml, is designed taking into account the requirements of safety and ease of use. Comes complete with a lid that screws onto the neck thanks to a GL45 thread. Prevents the penetration of external substances into stored reagents. Characteristics: • Volume – 250 ml • Height –138 mm • Diameter – 70 mm.

Conical flask KN-2-2000-72 Primelab is a high-quality laboratory accessory made of heat-resistant borosilicate glass 3.3. It has an easy-to-work shape with a wide base of 131 mm and a relatively narrow neck of 72 mm. Designed to work with bulk and liquid substances, the volume of which does not exceed 2 liters. The total height of the flask is 280 mm.

The PrimeLab oxidizer is designed for oxidation, combustion of substances, research of organic compounds and various studies. Thanks to thermal and chemical resistance, it is perfectly suited for its tasks. The device has the shape of an elongated cylinder with a wider upper part and two tubes. At their ends there are olives that guarantee a strong connection with other equipment when using a soft hose. When working with an oxidizing agent, it is important to adhere to the instructions for use and safety rules. The oxidizing agent produced by PrimeLab is made of durable borosilicate glass, which has many advantages. You can place an order for these products, which will be completed in a short time without compromising quality.

Borosilicate glass is used to make the cell body due to its chemical inertness and resistance to high temperatures. It does not react with most chemicals and has high thermal stability, which allows it to be used in a variety of conditions. The advantages of borosilicate glass electrochemical cell include: - High chemical resistance: Borosilicate glass is highly resistant to various chemical agents, allowing the cell to be used with a variety of reagents. - Thermal Resistance: Borosilicate glass can withstand high temperatures, allowing you to work with high temperature reactions or use the cell in elevated temperature environments. - Transparency: Borosilicate glass is transparent to visible light, allowing the processes occurring inside the cell to be observed. - Mechanical strength: Borosilicate glass has high impact resistance and mechanical strength, which allows the cell to be used in a variety of operating conditions. Borosilicate glass electrochemical cells are widely used in various fields, including chemical, biological, pharmaceutical and energy industries, as well as scientific research. They are reliable and efficient devices that allow various electrochemical processes to be carried out.

The Bourdon Primelab vessel is made of durable borosilicate glass. Withstands high temperatures, suitable for working with chemically active substances. It has absolute transparency and smoothness, which is important when carrying out certain laboratory processes. Externally, the vessel has the shape of an elongated tube with a narrower lower part, into which two other tubes are soldered. The Primelab company accepts orders for the production of Bourdon vessels according to individual customer requirements.

The "Spider" type with vacuum valves KV-19 14/23-19/26 Primelab has a non-standard appearance. Serves as a connecting element in laboratory installations, apparatus and devices. It has a reliable design that guarantees excellent tightness and prevention of gas leakage. The product is made in accordance with GOST from borosilicate glass, which does not enter into chemical reactions with contacted substances and is not afraid of temperature changes. The Primelab company accepts orders for the production of equipment and glassware according to the customer’s individual parameters.

The PrimeLab dark glass reagent jar is designed to work with a small amount of a substance of any consistency (up to 250 ml). A capacity scale is applied to its wall to quickly determine the volume of the contents of the substance. Made of durable glass that is wear-resistant. Characteristics: • Volume – 250 ml • Height – 1386 mm • Diameter – 70 mm • Thread - GL45.

Longe AO 29/32-29/32 PrimeLab, TS – straight length with a bend, which serves as a connecting element in laboratory installations. The height to the outlet is 75 mm with a total length of 125 mm and a diameter of 9 mm. For connection, a core grind (29/32) and a coupling grind (29/32) are provided. The length is made of technical glass that can withstand high temperatures. Chemically resistant, long service life, suitable for intensive use.

The flat-bottomed flask P-2-250-34 Primelab is made of technical glass. It has a spherical shape with a flat bottom that is convenient for work. Can be used without a specialized stand. The flat-bottomed flask has a long service life and is suitable for intensive use. Excellent for working with chemically active and toxic substances. Characteristics: • Volume – 250 ml • Height – 140 ml • Throat diameter – 34 ml • Ball diameter – 85 mm.