Catalog
Back to search results
External VT-D temperature sensor
Back to search results
External VT-D temperature sensor
It is necessary for accurate temperature maintenance in external objects.
The diameter and length of the submerged part are 3 and 240 mm, respectively.
The nominal static characteristic of Pt1000.
The diameter and length of the submerged part are 3 and 240 mm, respectively.
The nominal static characteristic of Pt1000.
Thermoelectric converter THA.GPKSH.011
The thermoelectric converter THA.GPKSH.011 is designed to measure the temperature of gaseous and liquid chemical environments that do not destroy protective fittings, as well as the surfaces of solids.
Termokon
Korolev
Produced in: Moscow region, Korolev
External temperature sensor PT 1000
from
6 120 ₽
Основные характеристики
Диапазон измерения температуры, °С От -70 до + 200
Погрешность измерения температуры, °С, не более 1
Номинальное сопротивление при 25 С,кОм 1.0
Длина рабочей части PT 1000 (погружной) 250 мм
Длина ручки 50 мм, диаметр ручки М12
Длина провода до 600 мм
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
External temperature sensor PT 1000, height 40 cm
Main characteristics
Temperature measurement range, °C From -70 to + 300
Temperature measurement error, °C, no more than 1
Nominal resistance at 25 C, kOhm 1.0
Dimensions, weight Height 40 cm
Sensor projection from the stand is 16 cm
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Thermoelectric converter THA.GPKSH.013
The thermoelectric converter THA.GPKSH.013 is designed for measuring the temperature of gaseous and liquid chemical environments that do not destroy the protective shell. It measures the temperature in the clean air atmosphere, gaseous chemically non-aggressive environments with humidity up to 95 %
Termokon
Korolev
Produced in: Moscow region, Korolev
External temperature sensor LA-501
Designed to measure the temperature in the external circuit of the LOIP LT-200 and LT-400 series thermostats. An external temperature sensor is connected to the temperature control unit and directly monitors the temperature in the external circuit of the thermostat, which significantly increases the accuracy of temperature maintenance.
Temperature range, °C from -50 to +250
Cable length, m 1.4
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Tripod for test tubes LA-203
Number of sockets, pcs 33
Hole diameter, mm 17
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 235x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Tripod for placing butyrometers in cryostats and thermostats LA-209
Number of sockets, pcs 11
Hole diameter, mm 25
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 180x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
LB33-187/1K Basket
It is designed for thermostating glasses, flasks and evaporating cups with samples in the laboratory bath LB33 and LB33-Sh.
Overall dimensions 310x250x210 mm
Weight 2.0 kg
Termeks
Tomsk
Produced in: Tomsk
Tripod for test tubes LA-207
Number of sockets, pcs 21
Hole diameter, mm 17
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 180x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Clamps for ISO-K
The clamp connection (DIN 28 404 and ISO 1609) allows connecting components from DN 63 to DN 630 in any position, on any fixed flange regardless of the location of the bolt holes.
Vakuummash
Kazan
Produced in: Kazan
Copper gaskets for CF flanges
Copper gaskets for CF flanges (oxygen-free copper).
Vakuummash
Kazan
Produced in: Kazan
Distilate Cooler for AE-4/AE-5 distiller
from
5 160 ₽
The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.
Livam
Belgorod
Produced in: Belgorod
Temperature equalization unit THERMOTEST-B1
It is designed to improve short-term temperature stability during verification and calibration of electronic thermometers LT 300 (except LT-300-F), LT and ExT-01/1 in calibration thermostats TERMOTEST 100, TERMOTEST-100-40, TERMOTEST 05 and TERMOTEST-05-1.
Termeks
Tomsk
Produced in: Tomsk
Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)
Vakuummash
Kazan
Produced in: Kazan
Basket T40-K
It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat.
A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Overall dimensions 305x305x390 mm
Internal dimensions 260x250mm
Weight 2.8 kg
Termeks
Tomsk
Produced in: Tomsk
Adapters for CF/ ISO-K SVB connections
ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
LB63-32/50K Basket
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Overall dimensions 515x310x215 mm
Weight 2.8 kg
Termeks
Tomsk
Produced in: Tomsk
LB63-140/4K Basket
Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth.
Overall dimensions 515x310x215 mm
Weight 3.5 kg
Termeks
Tomsk
Produced in: Tomsk