Equipment

Intensity: up to 2,500 rpm. Volume: 85dB Weight: 30 kg Dimensions: 33*33*29 (WxDxH) Timer: up to 30 min. Digital display: no Intensity adjustment: no Temperature adjustment: no Equipment: -Device -Key "Baikal" -A set of holders for test tubes (x6 (for 1.5-2 ml tubes) - 2 pcs., x3 (for 5-15 ml tubes, 2 pcs.). -A set of steel balls, 100 pcs.

Design features: Special system of air intake and exhaust of combustion products with adjustable thrust; Durable ceramic muffle; Closed heaters on four sides of the chamber; Microprocessor temperature controller; Conveniently located control panel and bright LED display; Ease of management and control; LED indicators of heater operation and protection operation; Automatic shutdown of heating when opening the door; Alarm when the current temperature exceeds the limits of the permissible range; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to the maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x110x285 mm Overall dimensions, WxHxD, not more than mm 505x955x655 Rated supply voltage, 220 V Rated power, W 3300

The CR-1B reactor is an automated chemical reactor with thermostat, stirrer and reagent management system. To control the reactor, specialized software is used (supplied with the reactor). This reactor may be of most interest for laboratory research for routine synthesis of nano/microparticles (e.g. vaterite), as well as experimental scaling tests with a view to further transferring it to production facilities.

The SNVS-215/3.5 vacuum drying cabinet with a volume of 215 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 350 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.

Maximum heating temperature, °C 400 Temperature difference across the platform, °C, no more than ± 5 Dimensions of the heating platform, mm 218x315 Power consumption, W 1800 Platform material aluminum alloy Overall dimensions, mm 285x370x110 Weight, kg 9

Industrial drying cabinet SNOL (SHS) 1700/5-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 500 ° C with forced air convection in stationary conditions.

Technical specifications: Operating temperature range, °C -25...+100 Accuracy of temperature maintenance, °C ± 0.2 The discreteness of the temperature display, ° C 0.1 Cooling capacity at 20°C, W 470 Pump capacity in the discharge circuit, not less than, l/min 10.5 Volume of working fluid, l 6.5 The open part of the bath/depth, mm dia.80x200 Power supply, V/Hz 220/50 Power consumption, not more than 3.6 kW Overall dimensions, mm 320x465x590 Weight without working fluid, kg 20

Specialized wavelength-dispersive XRF analyzer based on the Cochois scheme is designed for high-precision determination of chemical elements U, Th, Mo, Au, W, Tl, As, Pb as well as other elements in ores, rocks and when developing the technogenic fields. Possibility to determine groups of elements without readjustment of crystal-analyzer. Exceptionally high resolution of the Koshua X-ray optical scheme with crystal-analyzer quartz 1011. Developed mathematical support. Principle of analyzer operation is based on the excitation of the fluorescent radiation of sample atoms being under examination by radiation coming from an X-ray tube. Spectrum decomposition of the fluorescence radiation is performed according to Cauchois method. The fluorescence radiation focused by analyzing crystal and standard line are marked on Rowland focal circle. Then, they are recorded by X-ray radiation detector in turn. The intensity of the fluorescent irradiation with a particular wavelength is directly proportional to the chemical element concentration in the material under examination.

Design features: Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set temperature, temperature change rates and exposure time; Manual heating mode with timer with sound notification; Reliable and stable Pt 100 temperature sensor; Four-sided heating; Forced air circulation in the working chamber; Camera material – stainless steel; Backlit graphic display; Conveniently located control panel; Sound and light alarm when the current temperature exceeds the limits of the permissible interval; Independent overheating protection circuit with separate temperature sensor; Reliable door closing mechanism; High-quality silicone sealer; Highly efficient thermal insulation of the housing; The case is made of high-quality sheet steel and painted with heat-resistant powder paint; Number of shelves: standard – 2, maximum – 6. Technical specifications: Maximum heating temperature, °C +350 The error of reproducing the set temperature ° C ± 3 Temperature maintenance error, °C ± 1 Warm-up time to the maximum temperature, no more, min 45 Dimensions of the working chamber, (WxHxD), not less than mm 340x365x370 Overall dimensions, (WxHxD), not more than 685x580x680 mm Rated supply voltage, 220 V Rated power, W 2200

An oxygen adsorption generator is a special equipment designed to produce gaseous oxygen from atmospheric air by short—cycle non-heating adsorption. The main components of the generator are: adsorbers (vessels operating under excessive pressure) filled with zeolite molecular sieve, pneumatic valves, automatic control system, shut-off and control valves and other control and measuring devices, and equipment. Oxygen concentration: 30-95% Capacity: 500-3000 m3/hour

The stopper holder is made of Teflon. It allows you to mount securely the temperature sensor of the LT 300 or LT electronic thermometers in 14/23-sized laboratory glassware.