Language selection
Внимание! 06.04.2026 с 21:00 до 24:00 по по Московскому времени работа портала будет приостановлена для проведения технических работ. В настоящее время портал работает нестабильно.
Catalog
Back to search results
Vacuum compression furnace SNVS-8,5/16- I3
Back to search results
Vacuum compression furnace SNVS-8,5/16- I3
The electric furnace is designed for various thermal processes of annealing, degassing, sintering and other processes in vacuum at temperatures up to 1600 ° C and small gas emissions, in which there is no interaction of the residual gas medium with heater materials, screen insulation and other structural elements.
High temperature vacuum compression furnace SNVS-30/16-I6-D3
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Vacuum compression furnace SNVS-4,5.5,5/3-I2PD
Vacuum compression furnace SNVS-4,5.5,5/3-I2PD is designed for drying, degassing in vacuum and under pressure at temperatures up to 300 0C.
Tula-Term
Tula
Produced in: Tula
Laboratory electric furnace CHO-10
from
153 403 ₽
Designation
SNO-10
Volume, l
10
The material of the working chamber
is ceramic
Heating
4 sides
Power consumption, W, max
4500
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
Chamber low-temperature electric furnace with retractable hearth SNOT 14.20.15/6.2
from
2 938 000 ₽
The chamber furnace with digital control SNOT 14.20.15/6.2 is designed for firing products and heat treatment of metals.
Tula-Term
Tula
Produced in: Tula
High temperature vacuum compression furnace SNVS-30/16-I6-D3
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Shaft furnace industrial SSHO-12.13/11
Designation
SSO-12.13/11
Power, kW
90
Diameter, mm
1200
Height, mm
1300
Tula-Term
Tula
Produced in: Tula
Shaft furnace industrial SSHO-10.10/11
Designation
SSO-10.10/11
Power, kW
72
Diameter, mm
1000
Height, mm
1000
Tula-Term
Tula
Produced in: Tula
Electric tubular laboratory furnace for work at a temperature of 1300℃ - SUOL 0,3.4/13
from
724 480 ₽
Designation: SUOL 0,3.4/13
Temperature: 1300
Control: TRM-10
Number of zones: 1
Tula-Term
Tula
Produced in: Tula
Laboratory Mine Crucible melting furnace SSHOL-3/4-T
from
183 312 ₽
Laboratory mine crucible melting furnace SSHOL-3/4-T is designed for melting solder of tin and other metals at temperatures up to 400 ° C.
The heaters of the SSHOL furnace are located on the outside of the ceramic retort. Oven lid - removable
Tula-Term
Tula
Produced in: Tula
Chamber furnace with sliding hearth SNOT 6.15.6/12.5
from
680 000 ₽
Designation: SNOT 6.15.6/12.5
Temperature: 1250
Opendoors: electromechanical
Hearth drive: electromechanical
Camera Size: (WXDXH) 600x1500x600
Regulation zones: 2
Tula-Term
Tula
Produced in: Tula
Chamber electric resistance furnace CHO-8.10.8
from
550 000 ₽
Designation: SNO-8.10.8
Temperature: 1200
Opendoors: electromechanical
Camera size (w.G.V.):800x1000x800
Regulation zones: 1
Tula-Term
Tula
Produced in: Tula
Laboratory shaft furnace SSHOL-10/11
from
210 884 ₽
Designation
SSHOL-10/11
Supply voltage,
220 ± 10%
Network frequency, Hz
50
Power consumption, W, max
5000
Tula-Term
Tula
Produced in: Tula
Shaft furnace industrial SSHO-6.6/11
Designation
SSO-6.6/11
Power, kW
45
Diameter, mm
600
Height, mm
600
Tula-Term
Tula
Produced in: Tula
Drum furnace SBO-2,5.13/10-I2PV
The rotating furnace of indirect electric heating SBO-2,5.13/10-I2PV is designed for firing powdered ores to convert them into an oxide form at temperatures up to 1000 oC.
Tula-Term
Tula
Produced in: Tula
Chamber electric resistance furnace CHO-8.16.5/12.5
from
550 000 ₽
Designation: SNO-8.16.5/12.5
Temperature: 1200
Open.doors: electromechanical
Camera size (w.G.V.): 800x1600x500
Regulation zones: 2
Tula-Term
Tula
Produced in: Tula
Spherical vacuum furnace with bottom loading ESQVE-13.0.3.0/9.5SHM12
Spherical type vacuum furnace with bottom loading ESQVE-13.0.3.0/9.5SHM12 is designed for heat treatment of titanium rings at temperatures up to 950 degrees and vacuum up to 1x10-3mm Hg.
Tula-Term
Tula
Produced in: Tula
High Temperature Laboratory furnace CHO 5/17
from
1 524 600 ₽
Designation
SNO 5/17
Rated power Pmax, kW
5
Power supply voltage U, In 3 phases + N+PE
220
Maximum operating temperature T slave, oS
1700
Tula-Term
Tula
Produced in: Tula
Shaft furnace industrial SSHO-4.8/11
Designation
SSO-4.8/11
Power, kW
42
Diameter, mm
400
Height, mm
400
Tula-Term
Tula
Produced in: Tula
