Catalog
Back to search results
Circulation thermostat LT-112a
Back to search results
Circulation thermostat LT-112a
The LOIP LT-112a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid.
Design features:
The LOIP ATC intelligent control system adapts the parameters of the PID controller to the type of working fluid and eliminates the influence of instability of the mains voltage and air temperature on the operation of the system.
A productive discharge pump ensures efficient mixing of the coolant inside the bath and high accuracy of maintaining the temperature of an external object with a closed circuit.
A bright LED digital display displaying the current and set temperature with a discreteness of 0.1 °C.
Multifunctional control knob.
Simple correction of the internal temperature sensor readings with the possibility of calibration by two points.
A cooling coil connected to the water supply to reach temperatures below room temperature (installed on request, not included as standard).
Self-diagnosis system with indication of the causes of malfunctions on the display.
A safety device with a sound and light notification that provides automatic shutdown of heating in the event of a break in the temperature sensor circuit, as well as when the coolant level drops below the permissible level.
Stainless steel working baths, made by stamping, are characterized by a long service life and ease of cleaning.
The external body of the bath is made of powder-coated steel and is reliably insulated from the tank of the bath, which allows the operator to work safely with the equipment even at high temperature of the working fluid.
Technical specifications:
Temperature range:
without external cooling, °C Current +10 ... +100
with tap water cooling °C
Tvods+5 ...+100
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 1900
Pump:
max. flow rate, l/min 7.5
pressure, 0.17 bar
Bath volume, l 12
The working fluid is water, water-glycerin mixture.
Open part of the bath / depth, mm 190x296/150
Overall dimensions, mm 355x335x370
Weight, kg 10.2
Design features:
The LOIP ATC intelligent control system adapts the parameters of the PID controller to the type of working fluid and eliminates the influence of instability of the mains voltage and air temperature on the operation of the system.
A productive discharge pump ensures efficient mixing of the coolant inside the bath and high accuracy of maintaining the temperature of an external object with a closed circuit.
A bright LED digital display displaying the current and set temperature with a discreteness of 0.1 °C.
Multifunctional control knob.
Simple correction of the internal temperature sensor readings with the possibility of calibration by two points.
A cooling coil connected to the water supply to reach temperatures below room temperature (installed on request, not included as standard).
Self-diagnosis system with indication of the causes of malfunctions on the display.
A safety device with a sound and light notification that provides automatic shutdown of heating in the event of a break in the temperature sensor circuit, as well as when the coolant level drops below the permissible level.
Stainless steel working baths, made by stamping, are characterized by a long service life and ease of cleaning.
The external body of the bath is made of powder-coated steel and is reliably insulated from the tank of the bath, which allows the operator to work safely with the equipment even at high temperature of the working fluid.
Technical specifications:
Temperature range:
without external cooling, °C Current +10 ... +100
with tap water cooling °C
Tvods+5 ...+100
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 1900
Pump:
max. flow rate, l/min 7.5
pressure, 0.17 bar
Bath volume, l 12
The working fluid is water, water-glycerin mixture.
Open part of the bath / depth, mm 190x296/150
Overall dimensions, mm 355x335x370
Weight, kg 10.2
Circulation thermostat LT-417b
The LOIP LT-417b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.01
The error of setting the set temperature, not more than, ° C ± 0.02
Heater power, W 2200
Pump:
max. flow rate, l/min 6...12
pressure, 0.4 bar
Bath volume, l 17
The working fluid is water, silicone oil.
Open part of the bath / depth, mm 360x296/150
Overall dimensions, mm 532x335x350
Weight, kg 14.4
LOIP
Saint Petersburg
Produced in: Saint Petersburg
VT15-2 Liquid thermostat
It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type.
Pump for closed or open type thermostating systems.
All-metal stamped tub with a volume of 15 liters and a depth of 200 mm.
The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C.
The operating temperature range is +20...+200 °C.
Bath volume 15 l
Overall dimensions 420x330x480 mm
The open part of the bath is 150x260 mm
Bath depth 200 mm
Weight 16 kg
Power consumption 2.2 kW.
Termeks
Tomsk
Produced in: Tomsk
Circulation thermostat LT-216b
The LOIP LT-216b modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 10.5
pressure, 0.27 bar
Bath volume, l 16
The working fluid is water, water-glycerin mixture, silicone oil.
Open part of the bath / depth, mm 190x296/200
Overall dimensions, mm 355x335x420
Weight, kg 11.5
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Cryothermostat liquid FT-211-25
Technical specifications:
Operating temperature range, °C -25...+100
Accuracy of temperature maintenance, °C ± 0.1
The discreteness of the temperature display, ° C 0.1
Cooling capacity at 20°C,
W 520
Pump capacity in the discharge circuit, not less than, l/min 10.5
Volume of working fluid, l 10
The open part of the bath /depth, mm 190x130/200
Power supply, V/Hz 220/50
Power consumption, not more than 3.6 kW
Overall dimensions, mm 430x665x460
Weight without working fluid, kg 40
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Dry-air low-temperature thermostat TSV-01
The total volume of the chamber is 65 l
Overall dimensions 480x620x1070 mm
Weight 33 kg
Power consumption 200 W
Termeks
Tomsk
Produced in: Tomsk
Thermostat for determining viscosity LT-910
Design features:
Microprocessor-based PID controller;
Multifunctional control knob;
Efficient mixing system;
Self-diagnosis system;
Simple correction of internal temperature sensor readings;
Two-point calibration;
Built-in cooling coil;
Technical specifications:
Number of seats for viscometers 3
Temperature range
- without external cooling, °C
- with tap water cooling, °C
- with cryostat cooling, °C
(Current+10)...+150
(Tvods+5)...+150 0...+150
The error of setting the set temperature, ° C ± 0.02
Temperature maintenance error, ° C ± 0.01
Power consumption, W 1500
Overall dimensions, mm 380x235x560
Working depth, mm 300
Volume of working fluid, l 14
Weight of the device without liquid, kg 16
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Circulation thermostat LT-212a
The LOIP LT-212a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 10.5
pressure, 0.27 bar
Bath volume, l 12
The working fluid is water, water-glycerin mixture, silicone oil.
The open part of the bath / depth, mm 190x296/150
Overall dimensions, mm 355x335x370
Weight, kg 10.2
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Circulation thermostat LT-208a
The LOIP LT-208a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 10.5
pressure, 0.27 bar
Bath volume, l 8
The working fluid is water, water-glycerin mixture, silicone oil.
The open part of the bath / depth, mm 120x150/200
Overall dimensions, mm 180x335x420
Weight, kg 7.3
LOIP
Saint Petersburg
Produced in: Saint Petersburg
VT20 Liquid thermostat
It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type.
Pump for closed or open type thermostating systems.
With a set of devices VT20-4K can be used for testing samples of asphalt concrete and oil bitumen.
The operating temperature range is +20...+200 °C.
Bath volume 20 l
Overall dimensions 490x330x450 mm
The open part of the bath is 240x200 mm
Bath depth 210 mm
Weight 16 kg
Power consumption 2.2 kW.
Termeks
Tomsk
Produced in: Tomsk
VT4 Liquid thermostat
It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers.
Feed pump for external closed-type thermostating systems.
All-metal stamped tub with a volume of 4 liters and a depth of 150 mm.
The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C.
The operating temperature range is +20...+200 °C.
Bath volume 4 l
Overall dimensions 185x410x430 mm
The open part of the bath is 120x55 mm
Bath depth 150 mm
Weight 11 kg
Power consumption 2.2 kW
Termeks
Tomsk
Produced in: Tomsk
Liquid temperature
The operating temperature range is +20...+200 °C.
The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C.
Bath volume 14 l
Overall dimensions 315x330x460 mm
The open part of the bath is 100x190 mm
Bath depth 230 mm
Weight 15 kg
Power consumption 2.2 kW
Termeks
Tomsk
Produced in: Tomsk
CRYO-VT-13 Low-temperature liquid thermostat
It is designed to maintain the set temperature of the liquid coolant circulating in the internal bath of the thermostat and in the connected external consumers.
Feed pump for external closed-type thermostating systems.
Cooling capacity 650 W at +15 °C.
An internal bath with a volume of 17 liters and a depth of 250 mm.
The operating temperature range is +15...+30 °C.
Overall dimensions 708x468x885 mm
The open part of the bath is 130x185 mm
Bath depth 250 mm
Weight 65 kg
Power consumption 3.5 kW.
Termeks
Tomsk
Produced in: Tomsk
Circulation thermostat LT-211a
The LOIP LT-211a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 10.5
pressure, 0.27 bar
Bath volume, l 11
The working fluid is water, water-glycerin mixture, silicone oil.
The open part of the bath / depth, mm 160x240/200
Overall dimensions, mm 268x335x420
Weight, kg 10
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Circulation thermostat LT-124b
The LOIP LT-124b modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C+10 ... +100
with tap water cooling °C
Tvods+5 ...+100
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 1900
Pump:
max. flow rate, l/min 7.5
pressure, 0.17 bar
Bath volume, l 24
The working fluid is water, water-glycerin mixture.
Open part of the bath / depth, mm 360x296/200
Overall dimensions, mm 535x335x420
Weight, kg 14.2
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Liquid thermostat VT-ro-01
Operating temperature range +15...+100 °C
All-metal bath.
Basket for placing six cylinders for hydrometers.
The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C.
The volume of the bath is 30 liters
Overall dimensions 340x280x800 mm
The open part of the bath is 120x210 mm
Bath depth 500 mm
Weight 23 kg
Power consumption 2.2 kW
Termeks
Tomsk
Produced in: Tomsk
Circulation thermostat LT-311a
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +150
with tap water cooling °C
Tvods+5 ...+150
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 8,0
pressure, 0.25 bar
Bath volume, l 11
Working fluid water, water-glycerin mixtures, silicone oil
Open part of the bath / depth, mm 105x296/200
Overall dimensions, mm 268x335x400
Weight, kg 11.5
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Liquid low-temperature thermostat CRYO-T-02
It can be used for temperature control of any extended objects.
The thermostat is characterized by a large depth of the working bath and a temperature heterogeneity of ± 0.05 ° C in the entire working volume.
The operating temperature range is -15...+150 °C.
Bath volume 28 l
Overall dimensions 430x690x1320 mm
The open part of the bath is 115x185 mm
Bath depth 970 mm
Weight 72 kg
Power consumption 3.5 kW
Termeks
Tomsk
Produced in: Tomsk
Orbital Shaker LOIP LS-210
Technical specifications:
Type of motion orbital
Platform rotation speed, min-1 40-300
The amplitude of rotation of the platform, mm 30
Maximum load on the platform, kg 20
Timer (time is displayed in h, min, s) 0...8 hours
Power consumption, W 200
Platform size, mm 445x305
Overall dimensions, mm 525x510x225
Weight, kg 32
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Circulation thermostat LT-417b
The LOIP LT-417b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.01
The error of setting the set temperature, not more than, ° C ± 0.02
Heater power, W 2200
Pump:
max. flow rate, l/min 6...12
pressure, 0.4 bar
Bath volume, l 17
The working fluid is water, silicone oil.
Open part of the bath / depth, mm 360x296/150
Overall dimensions, mm 532x335x350
Weight, kg 14.4
LOIP
Saint Petersburg
Produced in: Saint Petersburg
PDP-Lab Muffle with heating plate
1 Operating temperature range:
salting chamber, oS - from 200 to 750
working surface of the evaporation chamber, oS - from 70 to 400
2 Accuracy of setting the temperature in the working space
of the furnace salting chamber, oS - 15
TOMANALIT
Tomsk
Produced in: Tomsk
Vacuum electric furnace for quenching in oil D-10.30.E-14UU-M
The system of internal quenching of long hollow parts. Mixing systems of the inner and outer parts of the quenching tank. Closing the intermediate vacuum gate until the start of quenching (allows to keep a clean heating chamber).
VakETO
Mosrentgen
Produced in: Moscow
UPVD 60-2 Water Deionizer
from
150 000 ₽
The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm.
Overall dimensions (LxWxH) 500×470×720 mm
Weight 36.5 kg
Livam
Belgorod
Produced in: Belgorod
Chamber low-temperature electric furnace of SNO resistance-3,5.5.4/6,5-0,1- I2-V-P
Designation: SNO-3,5.5.4/6,5-0,1- I2-V-P
Temperature: 650
Camera size (SHGV):
350x500x400 Door opening: manual
Regulation zones: 1
Fan: Yes
Tula-Term
Tula
Produced in: Tula
A walk-through oven with a hearth roller
The rolling (roller) continuous flow furnace SRO 11.60.3/9 with adjustable heating temperature is designed for heat treatment (heating, holding) of parts at temperatures up to 900 ° C in an oxidizing environment. The furnace can be used in various industries related to the heat treatment of metal.
Furnaces of this type have a number of advantages:
an almost unlimited length of the furnace, which allows to increase productivity;
high performance due to heating of each part from all sides (without shielding by adjacent parts and accessories);
minimal metal burn;
full automation of the process;
round-the-clock operation;
mechanization of transportation of processed metal
Tula-Term
Tula
Produced in: Tula
VT15-2 Liquid thermostat
It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type.
Pump for closed or open type thermostating systems.
All-metal stamped tub with a volume of 15 liters and a depth of 200 mm.
The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C.
The operating temperature range is +20...+200 °C.
Bath volume 15 l
Overall dimensions 420x330x480 mm
The open part of the bath is 150x260 mm
Bath depth 200 mm
Weight 16 kg
Power consumption 2.2 kW.
Termeks
Tomsk
Produced in: Tomsk
Grille on the back wall LAB-PRO RZP-SHVOS 120
Number of horizontal rods: 3 rods with a length of 930mm
Number of vertical rods: 3 rods 1000mm long
rods (d=10mm) – polished stainless steel AISI 304
rod holders – duralumin
rod clamps – screws-M-4 lambs (stainless steel AISI 304)
it is possible to install horizontal rods in the required position
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Vacuum furnace with descending hearth Terminionik T3
Termionik
Podolsk
Produced in: Moscow region, Podolsk
Circulation thermostat LT-216b
The LOIP LT-216b modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 10.5
pressure, 0.27 bar
Bath volume, l 16
The working fluid is water, water-glycerin mixture, silicone oil.
Open part of the bath / depth, mm 190x296/200
Overall dimensions, mm 355x335x420
Weight, kg 11.5
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Cryothermostat liquid FT-211-25
Technical specifications:
Operating temperature range, °C -25...+100
Accuracy of temperature maintenance, °C ± 0.1
The discreteness of the temperature display, ° C 0.1
Cooling capacity at 20°C,
W 520
Pump capacity in the discharge circuit, not less than, l/min 10.5
Volume of working fluid, l 10
The open part of the bath /depth, mm 190x130/200
Power supply, V/Hz 220/50
Power consumption, not more than 3.6 kW
Overall dimensions, mm 430x665x460
Weight without working fluid, kg 40
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Specialized vacuum electric furnace VP-575-13
Specialized vacuum electric furnace for high-temperature soldering of large-sized products
VakETO
Mosrentgen
Produced in: Moscow
Dry-air low-temperature thermostat TSV-01
The total volume of the chamber is 65 l
Overall dimensions 480x620x1070 mm
Weight 33 kg
Power consumption 200 W
Termeks
Tomsk
Produced in: Tomsk
BE-4 laboratory bidistillator
from
124 200 ₽
Purpose: obtaining distilled water of type 2 according to GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection"
Capacity:
distillate: 5.0 (-10%) l/h, bidistillate: 4.3 (-10%) l/h.
Heating elements:
1st stage of distillation: Heating element 3.5 kW 220V (stainless steel) – 1 pc., 2nd stage of distillation: Heating element 2.7 kW 220V (stainless steel) – 1 pc.
The quality of the produced water:
GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection"
Type of current, frequency, voltage:
alternating single-phase, 50 Hz, 220 V
Power consumption:
in distillate production mode: 3.5 kW, in bidistillate production mode: 6.2 kW
Overall dimensions (L×W×C), mm: 545×305×400
Weight: 16.5 kg
Warranty period: 12 months from the date of sale
Electrical conductivity of the produced water: bidistillate: 1.0-1.2 microns/cm, distillate: no more than 5.0 microns/cm
The temperature of the produced water: distillate: from 70 to 85 ° C, bidistillate: no more than 40 ° C
Source water consumption (at t of water 10 ° C) in the distillate production mode: 36 (±10%) l/h, in the bidistillate production mode: 88 (±10%) l/h
Source water pressure: 0.1-0.4 MPa
Version: Desktop with adjustable supports. Wall mounting is possible
Coefficient of water purification from radionuclides: at least
4000
Service life: at least 8 years
Livam
Belgorod
Produced in: Belgorod
Thermostat for determining viscosity LT-910
Design features:
Microprocessor-based PID controller;
Multifunctional control knob;
Efficient mixing system;
Self-diagnosis system;
Simple correction of internal temperature sensor readings;
Two-point calibration;
Built-in cooling coil;
Technical specifications:
Number of seats for viscometers 3
Temperature range
- without external cooling, °C
- with tap water cooling, °C
- with cryostat cooling, °C
(Current+10)...+150
(Tvods+5)...+150 0...+150
The error of setting the set temperature, ° C ± 0.02
Temperature maintenance error, ° C ± 0.01
Power consumption, W 1500
Overall dimensions, mm 380x235x560
Working depth, mm 300
Volume of working fluid, l 14
Weight of the device without liquid, kg 16
LOIP
Saint Petersburg
Produced in: Saint Petersburg