Language selection
Внимание! 06.04.2026 с 21:00 до 24:00 по по Московскому времени работа портала будет приостановлена для проведения технических работ. В настоящее время портал работает нестабильно.
Catalog
Back to search results
UPVD 10-4 Water Deionizer
Back to search results
UPVD 10-4 Water Deionizer
from
43 200 ₽
from
43 200 ₽
Go to the manufacturer's website
The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm.
Overall dimensions (LxWxH) 400×200×500 mm
Weight 11.5 kg
Overall dimensions (LxWxH) 400×200×500 mm
Weight 11.5 kg
UPVD 5-4 Water Deionizer
from
39 000 ₽
The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm.
Overall dimensions (LxWxH) 390×180×400 mm
Weight 9 kg
Livam
Belgorod
Produced in: Belgorod
UPVD 30-2 Water Deionizer
from
83 400 ₽
The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm.
Overall dimensions (LxWxH) 550×290×460 mm
Weight 21 kg
Livam
Belgorod
Produced in: Belgorod
UPVD 60-2 Water Deionizer
from
150 000 ₽
The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm.
Overall dimensions (LxWxH) 500×470×720 mm
Weight 36.5 kg
Livam
Belgorod
Produced in: Belgorod
Aquarius Deionizer (in a new case)
from
96 000 ₽
It is intended for obtaining in laboratory conditions from distilled especially pure (deionized) water used for the preparation of solutions, chromatographic samples, refueling of electrolytic hydrogen/oxygen generators and other purposes.
Technical specifications
The specific conductivity of the resulting water is not more than 0.20* mkSxcm
Capacity is at least 6* l/h
Metal ion content is not more than:
Fe, Pb, Ni, Co 5*mcG/l
Zn, Cd, Cu, Mn 1*mcG/l
The optical density of ammonia relative to bidistilled water is no more than D - 0.01*
Operating time of the replaceable cassette (total volume of purified water) is not less than 700 liters.
Volume of refueled distilled water is 1 l
Overall dimensions are 440x200x430 mm
The mass of the refilled device is not more than 9.5 kg
Working conditions: ambient temperature from +10°C to +35°C
Power supply from single-phase AC 220 V., 50 Hz
The power consumption is not more than 20 VA.
NPP Himelektronika
Moscow
Produced in: Moscow
Aquarius Deionizer
from
96 000 ₽
It is intended for obtaining in laboratory conditions from distilled especially pure (deionized) water used for the preparation of solutions, chromatographic samples, refueling of electrolytic hydrogen/oxygen generators and other purposes.
Technical specifications
The specific conductivity of the resulting water is not more than 0.20* mkSxcm
Capacity is at least 6* l/h
Metal ion content is not more than:
Fe, Pb, Ni, Co 5* mcG/l
Zn, Cd, Cu, Mn 1*m cG/l
The optical density of ammonia relative to bidistilled water is no more, D - 0.01*
Operating time of the replaceable cassette (total volume of purified water) is not less than 700 liters.
Volume of refilled distilled water is 1 l
Overall dimensions are 180x420x430mm
The weight of the filled device is no more than 9 kg
Operating conditions: ambient temperature from +10 ° C to +35 ° C
Power supply from single-phase AC 220 V., 50 Hz
The power consumption is not more than 20 VA.
NPP Himelektronika
Moscow
Produced in: Moscow
Vacuum drying cabinet with manual control SNVS-65/5
from
553 058 ₽
The SNVS-65/5 vacuum drying cabinet with a volume of 65 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 500 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.
Tula-Term
Tula
Produced in: Tula
Laboratory electric furnace CHO-10
from
153 403 ₽
Designation
SNO-10
Volume, l
10
The material of the working chamber
is ceramic
Heating
4 sides
Power consumption, W, max
4500
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
Chamber low-temperature electric furnace with retractable hearth SNOT 14.20.15/6.2
from
2 938 000 ₽
The chamber furnace with digital control SNOT 14.20.15/6.2 is designed for firing products and heat treatment of metals.
Tula-Term
Tula
Produced in: Tula
CRYO-VT-07 Low-temperature liquid thermostat
It is designed to maintain the set temperature of the liquid coolant circulating in the internal bath of the thermostat and in connected external consumers of closed or open type.
Feeding and suction pump for external closed or open type thermostating systems.
An internal bath with a volume of 27 liters and a depth of 200 mm.
The operating temperature range is +5...+40 °C.
Overall dimensions 420x710x840 mm
The open part of the bath is 100x100 mm
Bath depth 200 mm
Weight 53 kg
Power consumption 3.5 kW.
Termeks
Tomsk
Produced in: Tomsk
Liquid low-temperature thermostat CRYO-VIS-T-05-01
Operating temperature range -70...+30 °C
Two places for glass viscometers.
The stability and uniformity of the temperature in the working bath is not worse than ± 0.02 ° C.
Bath volume 16 l
Overall dimensions 800x530x1210 mm
The open part of the bath is 130x130 mm
Bath depth 370 mm
The size of the viewing window is 125x270 mm
Weight 125 kg
Power consumption 4.2 kW
Termeks
Tomsk
Produced in: Tomsk
Vacuum compression shaft electric resistance furnace VS-K50-7-20
VakETO
Mosrentgen
Produced in: Moscow
Heating plate LH-404
Maximum heating temperature, °C 400
Temperature difference across the platform, °C, not more than ± 5
Dimensions of the heating platform, mm 435x315
Power consumption, W 2500
Platform material aluminum alloy
Overall dimensions, mm 470x453x110
Weight, kg 15
LOIP
Saint Petersburg
Produced in: Saint Petersburg
LB21-Sh Laboratory bath
It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed.
The operating temperature range is Current +5...+200 °C.
One workplace with a diameter of 110 mm with five steel O-rings, a tripod and a foot with a clip.
Stamped steel bath with a volume of 3.5 liters and a depth of 60 mm.
Bath volume 3.5 l
Overall dimensions 515x360x610 mm
The open part of the bath is 295x145 mm
Bath depth 60 mm
Weight 6.5 kg
Power consumption 2.5 kW
Termeks
Tomsk
Produced in: Tomsk
VAC-12 platform scales
from
65 990 ₽
Technical characteristics:
NIP, KG12
Discreteness, g1,0
External calibration
The size of the weighing platform, mm350x320
The smallest weighing limit, g50
Accuracy class according to GOST OIML R 76-1-2011II high
Limits of error allowed during initial verification, goth 50g to 5 kg incl. ±0.5; sv.5kg to 12 kg ± 1.0
Dust and moisture protection (IP)54/65 (on request)
The setting time, s, no more than ~ 1 - 1.5
Weight adjustment 5KGF2*
7 years warranty
Gosmetr
Saint Petersburg
Produced in: Saint Petersburg
Shaft furnace LF LF-70/13-G1
Features:
Durable ceramic muffle;
Heaters are placed on four sides of the chamber;
Microprocessor temperature controller;
Control panel with bright LED display;
Highly efficient thermal insulation;
The furnace body is made of high-quality sheet steel and painted with powder paint;
LED indicators of heater operation;
Technical specifications:
Set temperature range
100 ...1300°C
The error of reproducing the set temperature, no more
± 10°C
Instability of temperature maintenance, no more
± 10°C
Rated supply voltage
220/380 V
Total power consumption
12000 watts
Working chamber volume
72 l
Overall dimensions
796x912x830 mm
Overall dimensions of the working chamber
394x394x452 mm
Weight
220 kg
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Circulation thermostat LT-116b
The LOIP LT-116b modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +100
with tap water cooling °C
Tvods+5 ...+100
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 1900
Pump:
max. flow rate, l/min 7.5
pressure, 0.17 bar
Bath volume, l 16
The working fluid is water, water-glycerin mixture.
The open part of the bath / depth, mm 190x296/200
Overall dimensions, mm 355x335x420
Weight, kg 11.5
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Heating mantle LH-120
The volume of the heated flask, ml 2000
Maximum heating temperature, °C 400
Dimensions, mm 310x350x130
Power, W 1000
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Heating mantle LH-110
The volume of the heated flask, ml 1000
Maximum heating temperature, °C 400
Dimensions, mm 310x350x130
Power, W 625
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Liquid low-temperature thermostat CRYO-VIS-T-06
Four places for glass viscometers or a basket for determining the pour point of petroleum products.
The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C.
The operating temperature range is -30...+50 °C.
Bath volume 15 l
Overall dimensions 440x710x620 mm
The open part of the bath is 140x170 mm
Bath depth 320 mm
The size of the viewing window is 104x270 mm
Weight 56 kg
Power consumption 3.5 kW
Termeks
Tomsk
Produced in: Tomsk