Furniture

Furniture for laboratory work. Table-sink on a support pedestal made of metal LAB-M MO ME 120.75.90 PP Width: 1200 Depth: 750 Height: 900 Package contents: table top – a single module made of polypropylene Attention! It is not recommended to use

The SHVM NVK 1500 MON is a metal fume cupboard for laboratory. The table top is made of monolithic piece of ceramics. External dimensions of the cabinet (W×D×H): 1560×750×2250 mm. Internal dimensions of the camera (W×D×H): 1500×600×1168 mm. Table top material: monolithic ceramic. A reliable and durable laboratory cabinet The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop. The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of the AISI-316 polished stainless steel. There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal. The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4-mm tempered glass in an aluminum frame. The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off. The reagents needed for work can be placed in the lower cabinet cabinet. The cabinet is also made of metal. The cabinet has swing doors and one non-removable shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit. The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor. Advantages of the SHVM NVK 1500 MON cabinet A metal fume cupboard, perfect for any laboratory; The wide table top allows you to equip the workplace as conveniently as possible; It is durable, reliable and very convenient to use; The protective screen is made of tempered glass; The cupboard is built into the cabinet, reagents can be safely stored in it. Application of the SHVM NVK 1500 MON cabinet Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis. Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.

BASIC EQUIPMENT Working box front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – tempered glass in an aluminum frame on the top panel: 4 anti-explosion the valve lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm flange d=250mm (the distance from the back panel to the center of the flange is 170mm) switching box with automatic emergency power off 16A easily removable exhaust visors 3 levels of exhaust on the rear panel: 4 holes d =22mm with plugs made of stainless steel for installing additional pipes or taps technological hole d=50mm with a plastic plug counterweights are placed in the front pillars-pylons and are easily serviced Frame base metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather: double metal facades with a noise damper, opening angle 270° handles – polypropylene 4 compartments with locks 2 shelves with the possibility of installation on three levels in any of the compartments 2 flanges d=100mm service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather: adjustable supports

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

Furniture for laboratory work. Titration table Working surface: Porcelain stoneware (the surface directly under the rack is TRESPA Athlon 8mm) Length, mm: 1200 Depth, mm: 600 Height, mm: 900(1800) EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) the top panel of the rack with a depth of 190mm – metal painted with powder paint (RAL 1001)

The permissible distributed load on the table is up to 250 kg. 1. LK-900 SN (chipboard) Width – 900 CPL- 32 370 ₽ CERAMICS- 33 720 ₽ GRANTEC- 40 710 ₽ STAINLESS STEEL. STEEL- 43 010 ₽ LAB HPL- 41 750 ₽ 2. LK-900 SN (steel) Width – 900 CPL- 40 280 ₽ CERAMICS- 41,630 ₽ GRANTEC- 48 620 ₽ STAINLESS STEEL. STEEL- 50,920 ₽ LAB HPL- 49 660 ₽ 3. LK-1200 SP (chipboard) Width – 1200 CPL- 37 740 ₽ CERAMICS- 39,900 ₽ GRANTEC- 48 750 ₽ STAINLESS STEEL. STEEL- 51,680 ₽ LAB HPL-50 970 ₽ 4. LK-1200 SP(steel) Width – 1200 CPL- 47 620 ₽ CERAMICS- 49,780 ₽ GRANTEC- 58 630 ₽ STAINLESS STEEL. STEEL- 61,560 ₽ LAB HPL-60 850 ₽ 5. LK-1500 SP (chipboard) Width – 1500 CPL- 44 300 ₽ CERAMICS- 46,680 ₽ GRANTEC- 58 240 ₽ STAINLESS STEEL. STEEL-61 710 ₽ LAB HPL-60 600 ₽ 6. LK-1500 SP(steel) Width – 1500 CPL- 56 540 ₽ CERAMICS- 58,920 ₽ GRANTEC- 70 480 ₽ STAINLESS STEEL. STEEL- 73,950 ₽ LAB HPL-72 840 ₽ 7. LK-1800 SP (chipboard) Width – 1800 CPL- 51 260 ₽ CERAMICS- 53 180 ₽ GRANTEC- 67 720 ₽ STAINLESS STEEL. STEEL- 71 560 ₽ LAB HPL-70 030 ₽ 8. LK-1800 SP(steel) Width – 1800 CPL- 64 120 ₽ CERAMICS- 66 040 ₽ GRANTEC- 80 580 ₽ STAINLESS STEEL. STEEL- 84 420 ₽ LAB HPL-82 890 ₽

The NV-800 SHD-O cabinet is designed for storing documents It has no doors, has 4 shelves-inserts and an fixed middle panel. The cabinet is made of laminated chipboard with a shockproof PVC edge of 2 mm on the facade. Included in the set: 4 shelves-inserts made of laminated chipboard; fixed middle panel.

Furniture for laboratory work. Sliding cabinet Length, mm: 400 Depth, mm: 580 Height, mm: 830 PACKAGE CONTENTS case – melamine 16mm thick one built-in shelf lock roller supports h=60mm

The table is 760 mm high with two countertops measuring 1500×800 mm each. Countertops made of porcelain stoneware, monolithic ceramics, stainless steel, chipboard or plastic. It is designed for sitting work. It can be equipped with various superstructures, sliding and hanging bollards. Overall dimensions 1500x1600x760 mm

equipment side decorative panels – melamine 16mm thick all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

It is designed for convenient placement of the installation for cryoscopic determination of the molecular weight of CRYON 1.

Laboratory work desk Table top: KG-ESS (porcelain stoneware) with a side made of n/w steel Length, mm: 1800 Depth, mm: 650 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)