Catalog
Back to search results
SHVM NVK 1200 MON Metal fume cupboard without plumbing (1260×750×2250)
Back to search results
SHVM NVK 1200 MON Metal fume cupboard without plumbing (1260×750×2250)
from
110 927 ₽
from
110 927 ₽
Go to the manufacturer's website
The SHVM NVK 1200 MON is a metal fume cupboard for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
Reliable and durable construction
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
THe ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet has an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet also made of metal. The cabinet has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1200 MON cabinet
A metal fume cupboard suitable for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
A hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
Reliable and durable construction
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
THe ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet has an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet also made of metal. The cabinet has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1200 MON cabinet
A metal fume cupboard suitable for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
A hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
SHVM NVK 1500 MON+ Metal fume cupboard with plumbing (1560×750×2250)
from
123 771 ₽
The SHVM NVK 1500 MON+ is a large metal fume cupboard with plumbing fixtures for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for laboratory
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, it is resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass, covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON+ cabinet
A metal fume cupboard with plumbing, suitable for any laboratory;
The wide table top allows you to organize the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Exhaust cabinets of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
SHVM NVK 1200 MON+ Metal fume cupboard with plumbing (1260×750×2250)
from
116 089 ₽
The SHVM NVK 1200 MON+ is a metal fume cupboard with plumbing for work in the laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for the laboratory
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
The ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass and covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the cabinet SHVM NVK 1200 MON+
A metal fume cupboard with plumbing, an excellent choice for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
SHVM NVK 1500 MON Metal fume cupboard without plumbing (1560×750×2250)
from
120 792 ₽
The SHVM NVK 1500 MON is a metal fume cupboard for laboratory. The table top is made of monolithic piece of ceramics.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable laboratory cabinet
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of the AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4-mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet cabinet. The cabinet is also made of metal. The cabinet has swing doors and one non-removable shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON cabinet
A metal fume cupboard, perfect for any laboratory;
The wide table top allows you to equip the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The cupboard is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-1500 SHV-B-NERZH Fume cupboard with stainless steel countertop
from
81 338 ₽
The Korsa NV-1500 SHV-NERZH Laboratory fume cupboards are single—frame cabinets with a width of 1410 mm with a stainless steel countertop.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: stainless steel.
Convenient fume cupboards for comfortable work in the laboratory
Working surface material: stainless steel. It is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It is resistant to prolonged exposure to temperature, organic solvents, and oils. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids.
The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
BUILT-IN DRAWER UNITS (WITH 3 DRAWERS) HEIGHT 900 MODELS: LK-400 TYA-In (WITH 3 DRAWERS), LK-450 TYA-IN (WITH 3 DRAWERS), LK-600 TYA-IN (WITH 3 DRAWERS), LK-750 TYA-IN (WITH 3 DRAWERS), LK-900 CHA-IN (WITH 3 DRAWERS)YY
from
11 000 ₽
1. LK-400 TYA-V (with 3 drawers)
Width- 400
Chipboard- 11,000 ₽
Steel-20,980 ₽
2. LK-450 TYA-V (with 3 drawers)
Width- 450
CHIPBOARD- 11 360 ₽
Steel- 21 060 ₽
3. LK-600 TYA-V (with 3 drawers)
Width- 600
CHIPBOARD- 15 530 ₽
Steel- 24,950 ₽
4. LK-750 TYA-V (with 3 drawers)
Width- 750
CHIPBOARD- 18 600 ₽
Steel- 27 030 ₽
5. LK-900 TYA-V (with 3 drawers)
Width- 900
CHIPBOARD- 19 300 ₽
Steel- 31 070 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Cabinet for storing dishes, documents SHL-90.50.202.M
900 mm wide, 2025 mm high cabinet made of painted steel for storing laboratory utensils and documents.
Two compartments with two metal shelves in each. The upper and lower doors are made of steel.
Overall dimensions 900x500x2025 mm
Weight 95 kg
Termeks
Tomsk
Produced in: Tomsk
Cupboard for dishes LAB-M SHP 50.50.194
Furniture for laboratory work.
Cupboard for dishes
Length, mm: 500
Depth, mm: 500
Height, mm: 1940
PACKAGE
CONTENTS housing – white melamine with a thickness of 16 mm, ABS edge of dark gray color
facades – tinted light gray glass
2 compartments (the upper one is 686 mm high, the lower one is 1076 mm high)
5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower) with the possibility of rearrangement at 3 levels in height each).
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Table top for LAB-PRO RP 90.65 TR-E16/23 laboratory table
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Wall-mounted low table LAB-PRO SPCn 150.80.75 KG-ESS
BASIC EQUIPMENT
The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Hidden fasteners
Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023)
Rear side boxes
Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Desk LAB-1500 SP
Furniture for laboratory work.
Desk
Length, mm: 1500
Depth, mm: 700
Height, mm: 760
COMPLETE
SET table top, base and curbstones – melamine 16mm thick
left curbstone with 3 drawers, internal drawer size – 310*470* 100mm, full extension guides
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Table sink LAB-M MO 150.60.90 PP
Table-sink LAB-M MO 150.60.90 PP
Width, mm: 1500
Depth, mm: 600
Height, mm: 900
equipment:
The table top is a single module made of polypropylene ATTENTION! It is not recommended to use the inner size of the bowl for work with oil and petroleum products (fuel oil, bitumen, etc.)
– 500*400*285 mm
The base of the sink table is a support pedestal made of white melamine
Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging
Without shelves
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Cabinet for devices LAB-M SPr 50.50.194
Furniture for laboratory work.
Cabinet for appliances
Length, mm: 500
Depth, mm: 500
Height, mm: 1940
PACKAGE
CONTENTS body – white melamine with a thickness of 16 mm, ABS edge dark gray
facade – white melamine with ABS edge dark gray
2 compartments (the upper one is 686 mm high, the lower one is 1076 mm high)
the upper compartment is open, the lower one with a hinged facade
has 5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower one) with the possibility of rearrangement on 3 levels in height each).
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-800 SPr Cabinet for devices (with 2 glass doors)
from
17 202 ₽
The NV-800 SPr cabinet for devices with 2 glass doors.
The cabinet is made of laminated chipboard with a 2 mm shockproof PVC edge on the facade.
Included in the set:
2 glass doors for the upper compartment;
2 doors for the lower compartment;
4 shelf inserts;
metal legs 100 mm high.
NV LAB
Moscow
Produced in: Moscow, Moscow region
LAB-M MD ME 150.65.90 PP
Furniture for laboratory work.
Washing table on a metal support stand LAB-M MD ME 150.65.90 PP
Width, mm: 1500
Depth, mm: 650
Height, mm: 900
Equipment:
The table top is polypropylene with an overhead rim around the perimeter. Attention! It is not recommended to use it for working with oil and petroleum products
(fuel oil, bitumen, etc.)
2 Bowls – polypropylene. Hanging bowl attachment
The inner size of each bowl – 400*400*300 mm
The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016.
Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Cabinet hinged LAB-M NSHO 120.35.70
Furniture for laboratory work.
Mounted storage cabinet
Length, mm: 1200
Depth, mm: 350
Height, mm: 700
PACKAGE
CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray
two open compartments
in the right compartment 1 built–in shelf, in the left compartment 1 easily removable shelf with the possibility of rearrangement at 5 levels in height
the permissible load on the shelf is 20 kg.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-800 SCb Anti-vibration table for centrifuge (860×860×750)
from
19 476 ₽
The NV-800 SCb is a large specialized laboratory table with a damping concrete slab on a sand cushion. It is designed to accommodate centrifuges, sieves and other devices that vibrate strongly during operation.
Dimensions when assembled: 860×860×750 mm.
The table has a reinforced metal frame. The main countertop has a built-in drawer open from above, which contains a sand cushion. It is closed with a heavy concrete slab, which is attached to a second, smaller countertop. The sand cushion and the concrete base of the second countertop provide good protection against vibrations.
The size of the anti-vibration countertop: 660×660 mm. Like the main countertop, it is made of chipboard, and visually they do not differ from each other.
The table has a metal frame painted with white powder paint. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-1500 SHV-PB Fume cupboard with table top made of polypropylene
from
60 312 ₽
The Korsa NV-1500 SHV-PB laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a table top made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: polypropylene.
A reliable fume cupboard for laboratories
Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis.
The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
High wall table LAB-PRO SPCv 180.80.90 LA
BASIC EQUIPMENT
The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Hidden fasteners
Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023)
Rear side boxes
Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Washing table LAB-M MO13 ME 80.60.90 SS
Furniture for laboratory work.
Washing table on a metal support stand LAB-M MO13 ME 80.60.90 SS
Width, mm: 800
Depth, mm: 600
Height, mm: 900
equipment:
The table top is a single module made of SUS 201 stainless steel (analogous to AISI 201). Attention! The product is recommended to be used only for work with non-aggressive substances. For work with various reagents, in addition to mineral acids, it is recommended to use washing tables made of AISI 304 stainless steel.
Inner bowl size – 340*400* 130mm
The base of the sink table is a metal support pedestal. The lower part is an all–welded frame painted with dark gray RAL 7011 powder paint. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016.
Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging
Without shelves
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1210 PC Physical wall-mounted laboratory table (1210×610×1650)
from
25 005 ₽
NV-1210 PC is a wall table with a superstructure in the NV line. The table top is made of monolithic ceramic with a depth of 70 cm and a width of 121 cm. A lamp and two sockets are built into the superstructure. It is designed for standing work: the height of the table top is 85 cm.
External dimensions of the table (W×D×H): 1210×700×1650 mm.
The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. It is more resistant to chemicals and heat than ceramic tile since there are no seams.
The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 25 cm, and its height is 80 cm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
On the right-hand side under the table top there is a built-in cabinet with three drawers. You can store laboratory utensils, equipment accessories or other small things there.
The side laminated panels of the table (chipboard 16 mm thick) are edged with a 2 mm PVC edge, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
Advantages of NV-1210 PC tables
The working surface is made of monolithic ceramics.
It is convenient to work while standing: the height of the working surface is 85 cm.
On the shelves and in the drawers of the table you can store accessories to the devices on the table, laboratory utensils or reagents.
Application of NV-1210 PC tables
Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.
NV LAB
Moscow
Produced in: Moscow, Moscow region