Search

The CADLib Personal model allows you to check both the geometric characteristics of a 3D project and the attributes, structure and completeness of information on objects without access to the database server. Provides simple and secure data transfer of BIM models of large objects, as well as performing verification and analysis of this data. The freely distributed cross-platform CADLib Personal Model software is part of the Model Studio line and allows you to open and view super-large projects downloaded from the CADLib Model database and Archive in MLT format, as well as in the widely used IFC format. The new software core allows you to quickly download large amounts of data and increase the speed of working with them. The system allows you to view and display the components of the project structure and all the attribute data of objects. Improved visualization tools include viewing the project from a third person with a realistic avatar for visual verification of the project. In addition to callouts and measurements, geometric shapes have been added to annotations. The ability to transfer annotations using the XML format.

Software "Atom" works within MSWindowsXP environment/7/8/10 and provides the analyst with a wide range of possibilities for conducting atomic emission spectral analysis, performs all the necessary processing of atomic emission spectra and calculation of concentrations, and also allows routine and non-standard analyses to be carried out with maximum efficiency.

The HLA Fusion program allows you to analyze the data obtained using One Lambda kits for HLA typing and antibody detection. Fusion can be used in laboratory computer networks. The program works with data from LabScan 100 and Bio-Tek ELX800-NB devices. The user can adjust the "cut-off" values to refine the results and create their own work reports. A convenient database includes: complete patient information, antibody screening history (LABScreen, FlowPRA, LAT, LCT), genotyping (rSSO, SSP, SBT), serological typing (LMT, Terasaki Tissue Typing trays), KIR and MICA typing. The program includes modules for analyzing the results obtained using the One Lambda kits: FlowPRA, Micro SSP, LABScreen, LABType, LAT, LCT, and Quantiplex microspheres. The One Lambda software is designed to facilitate the analysis of results and the determination of HLA. However, it should be remembered that the program is just an assistant and the results should be carefully checked by a specialist with HLA typing experience to confirm the correctness of the result.

A software module for the study of the function of the auditory tube with a perforated eardrum.

The evoked potentials (VP) method is used to study the function of the sensory systems of the brain (somatosensory, visual, auditory) and brain systems responsible for cognitive processes. The method is based on the registration of bioelectric reactions of the brain in response to external stimulation (in the case of sensory VP) and when performing a cognitive task (in the case of cognitive VP). For diagnostic purposes, short-latency auditory, somatosensory, visual and motor VP have been most widely used. For example, stem AVPs (Brainstem auditory evoked potentials) are used as a standard neurophysiological test for the study of brain stem lesions and an objective assessment of hearing impairment. Somatosensory and motor VP make it possible to identify and assess the degree of dysfunction of the spinal cord pathways. Visual VP is important in the diagnosis of multiple sclerosis.

LIS LabForce is a unified automation system for all aspects of laboratory service activities. The configuration for automation of the PAO department and the cytology laboratory contains all the necessary workstations to support the histological process and the features of the cytology laboratory, as well as automation of the morgue and autopsy process. The system takes into account all the requirements of the Ministry of Health for maintaining accounting and reporting documentation. There are specialized workplaces for working with a wet archive and organizing the storage of glasses, blocks and a subsystem for accounting reagents and consumables. The system supports the connection of IGH devices. LabForce integrates into the digital circuit of a medical organization using modern data exchange protocols.

LIMS I-LDS significantly increases the efficiency of laboratories, allowing consumers of laboratory data, including production units, to be confident in meeting the quality requirements imposed both on the laboratories themselves and on the entire production chain. Being a source of data on qualitative and quantitative test results and characteristics of control objects, the laboratory information management system I-LDS provides an opportunity to integrate data in real time into dispatching systems and resource planning systems of the enterprise and the company. The introduction of LIMS I-LDS is aimed at a qualitatively new level of laboratory service, increasing confidence in the results of work and significantly optimizing key business processes. LIMS I-LDS is the information core of quality control of manufacturing enterprises: It allows to improve quality control, ensuring uniformity in the performance of functions by laboratory staff; reduces test execution time by automating calculation of measurement methods, reporting and preparation of quality documents; guarantees timely provision of correct information to the management about the quality of the laboratory, receipt of integrated data by the information services of the enterprise in real time; optimizes laboratory business processes by planning activities and rational use of resources (personnel, equipment, reference materials, reagents and auxiliary materials).

The use of the Chameleon complex will allow during a one-time installation of the object: • to carry out visual and measuring control of the welded joint to determine the required number of exposures at the specified values of the distance "radiation source-object of control", the size of the focal spot, the control class according to the standard GOST ISO 17636-2-2017 to measure intensity (gray level)/optical density at any point of the image to display a histogram (distribution) of image intensities to display a histogram of the intensity/optical densities of an arbitrarily selected segment or area in the image to use digital filters to restore some of the useful information in the digital image calibrate the "electronic ruler" according to the known dimensions of objects in the image (for example, the sensitivity standard) to measure after calibration the linear dimensions of defects, the distance between defects, the distance between any points in the image after calibration, to measure the linear dimensions of defects, the distance between defects, the distance between any points in the image calculate the area of defects measure the signal-to-noise ratio along the rectangle 22 by 50 at the point under the cursor determine the value of the basic spatial resolution SRb from the image of the double wire type standard • to obtain an X-ray image of the welded joint in accordance with GOST ISO 17636-2-2017 • to perform measurements of the irregularities of the welded joint detected by the results of decoding • to generate a conclusion based on the results of the control without an intermediate stage of fixing the results Flat panel detector "Prodis.Mark" technology: CMOS scintillator: CsI operating modes: static, dynamic (without the use of intermediate processes of "fixing" the radiation image) the maximum energy of the radiation source is 300 keV pixel size: 50 microns the size of the active area: 12x15, 15x24 or 24x30 cm Software – DICONDE Engineering solutions and technologies used in the manufacture of the detector allow: to ensure high data reading speed and low noise level; to meet the requirements for the quality of the resulting image according to GOST ISO 17636-2 for thicknesses in the range of 1.5-12 mm; to reduce by an order of magnitude the control time during exposure in real time (analog of the X-ray method) Device for non-contact measurement of geometric parameters of a welded joint It is intended for obtaining a digital model of the profile of a welded joint in real time and subsequent measurement of such parameters as: linear and angular displacement of edges, height and width of reinforcement, smooth transition from the main to the deposited metal, depth of undercuts. The achieved measurement accuracy is 0.1 mm Control welded joint rotator Provides circular movement of the object under control in accordance with the specified modes: the speed of rotation, the number of stops, the pause time required for the exposure.

The Biometra TProfessional Manager software is designed to manage TProfessional series amplifiers (thermal cyclers). TProfessional Manager allows you to simultaneously manage five TProfessional amplifiers, create, edit and save amplification programs for them. The program has a simple and intuitive interface with the possibility of tabular or graphical programming mode.

The centralized solution is designed to standardize the exchange of laboratory research data, combining all clinical and diagnostic laboratories in the region into a single system. The system provides all the necessary tools to automate each stage of the laboratory process, from the receipt of biomaterial for research to the issuance of results to the patient, as well as extensive analytical capabilities for the management of a medical organization to monitor and evaluate the effectiveness of the use of materials, equipment and personnel labor costs. The key feature of LIS 2.0 is integration with MIS, which allows doctors to see all the tests in a single information space.

The new generation of OverGrower® solves 100% of the problems of multi-zone monitoring and control of hydroponic and aeroponic installation parameters. Suitable for upgrading existing and new phytotrons, climate chambers, grow boxes, laboratories, greenhouses and greenhouse complexes - from an amateur farm to industrial production of crop products. The OVERGROWER complex is a system for automating the cultivation of plants using aero- and hydroponics. The installation takes on all the tasks of multi-zone control and manages the corresponding system parameters itself.

Key Features: • Thanks to the automation of system parameters, the equipment allows minimizing the labor costs of the grower. This ensures production efficiency and optimization of management processes. • The best solution for environmentally isolated laboratories and city farming. • The computer agricultural system provides the agronomist with all the necessary functionality for simple, intuitive programming of all growing processes, and comfortable control from anywhere in the world!

Control of all necessary parameters, such as: - Acidity pH - mineralization TDS / electrical conductivity EC - Solution temperature - Volume of water in the tank, in liters and percentage - Air temperature of the plant habitat - Air humidity of the plant habitat - Illumination - CO2 concentration in the air - Connecting any devices via modules - Integration with any software (customization available)

Modularity: ❖ Expand the basic set by simply connecting additional Expansion Modules if you need more capabilities ❖ Unlimited number of connected expansion modules (sensors, dispensers, smart sockets, etc.) ❖ Up to 5 growing zones simultaneously - control of several habitats: solution tanks, microclimate, watering and lighting ❖ From 1 to 10,000 sq.m. in each growing zone - the control and management capabilities of the device ❖ Connection of expansion modules via cable up to 300 m ❖ Connection of expansion modules using AirGrow® technology up to 5 km
❖ Hydroponic and aeroponic cultivation in all variations is controlled by a universal device ❖ Built-in software with WEB application is provided free of charge ❖ Recommendations for growing ❖ Free growing profiles

With the help of LIS ACL, you can: - register orders by means of barcoding; - maintain databases of patients and samples; - sort and distribute samples to workplaces; - connect analyzers for automatic transmission of tasks to automate manual techniques; - quickly generate worksheets of the required format for manual techniques; - conduct quality control in accordance with Russian and international standards; - to introduce rules for the appointment of additional studies, depending on the results obtained; - customize the format for providing results in text or numeric form; - quickly generate statistical reports on the following parameters/formats; - add expert comments to the results of completed tests, select various forms of data printing; - send research results by e-mail; - view patient histories, including the dates of their visits and the results of the studies; - to integrate with medical information systems and regional health information services; - receive prompt technical support for the product around the clock.