Search

The NV-400 TDYAN side cabinet with drawer and shelf insert The standard version of the side table for the laboratory table includes: a niche, 1 drawer on roller guides, a swing door, a shelf insert, 2 mm shockproof PVC edge, 4 mm plastic baseplates. In the standard version, we offer cabinets for laboratory tables in gray color. However, in agreement with the customer, it is possible to change the color to white, without increasing the cost. We are also ready to adapt the size and materials so that they meet your needs.

Nitrogen generators are designed to create an inert atmosphere, fill low-pressure tanks, "rinse" test tubes with inert gas and other applications that require a large, by laboratory standards, nitrogen consumption with reduced requirements for its purity. Technical specifications Volume fraction of nitrogen is not less than % by volume (including impurities of inert gases — argon, neon, helium) 99.6 Volume fraction of oxygen is not more than, % vol. 0,4 Volume fraction of water vapor is not more than, % vol. 0.002 (20 ppm) Maximum nitrogen capacity is at least 200 (3.33 l/min), l/h Maximum nitrogen outlet pressure is not less than 3.5 ati The time of setting the operating mode for single-shift operation is no more than 30 min Nominal inlet air pressure is 6 ati Maximum allowable inlet air pressure is 8 ati Minimum inlet air pressure is 5 ati Compressed air consumption, at nominal inlet pressure and maximum flow rate is no more than, l/h, 1200 (20 l/min) Power consumption is not more than, VA, 100 Overall dimensions (width x depth x height) are not more than, mm, 230x525x510; Weight is not more than 26 kg Working conditions: ambient temperature, C°, from +10 to +35 Electric power supply from single-phase AC mains voltage, V, 220± 10% and frequency, Hz, 50 ± 1 Average full service life is at least 6 years The generator for electrical safety meets the requirements of Class 1, type H according to GOST 12.2.025-76

The SNVS-50/5 vacuum drying cabinet with a volume of 50 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 500 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.

Vibration transducers DN-14 are designed to measure vibration by converting mechanical vibrations into electrical signals proportional to the vibration acceleration of an oscillating object. Vibration converters DN-14 are used in conjunction with vibration measuring devices in factory and laboratory conditions.

The AVDM-250 high-vacuum unit is a structure consisting of a vacuum diffusion oil-vapor pump, a nitrogen trap, a vacuum gate, a frame or a plate. The principle of operation of the AVDM-250 unit is based on the pumping action of a vacuum diffusion steam oil pump. When the AVDM-250 unit is operating, liquid nitrogen is poured into the trap. Condensation of working fluid vapors occurs on the elements of the freezing device cooled with liquid nitrogen. The frame (plate) is designed for mounting the components of the unit. The ends of the wires are connected to a connector mounted on the frame of the AVDM-250 unit.

It is designed to maintain the set temperature of the liquid coolant circulating in the internal bath of the thermostat and in the connected external consumers. Feed pump for external closed-type thermostating systems. Cooling capacity 370 W at +20 °C. An internal bath with a volume of 27 liters and a depth of 200 mm. Operating temperature range -30...+100 °C. Overall dimensions 685x395x825 mm The open part of the bath is 320x220 mm Bath depth 200 mm Weight 56 kg Power consumption 3.5 kW.

The complete set is fully made of polypropylene. There are no components sensitive to the action of corrosive substances. Inside the storage area there are 2 compartments.In each compartment there is 1 easily removable shelf made of polypropylene with the possibility of installation at 3 levels in heightThe permissible load on the shelf is 30 kg. The storage cabinet also includes: 2 hinged facades made of polypropylene hinges outside the storage area (pin system) polyamide lock in each door handles made of polypropylene cabinet has a double back wall. Extraction of reagent vapors is carried out from all storage areas flange ∅ 100 mm on the back wall for connection to the exhaust ventilation hidden adjustable supports (0-40 mm). The adjustment of the supports is carried out from inside the pedestal through the base

Furniture for laboratory work. Length, mm: 800 Depth, mm: 580 Height, mm: 780 body – melamine 16 mm thick 1 compartment 1 built-in shelf

Execution - Universal Recirculator Type - Closed Case Material - Plastic Number of lamps/power, W - 2/15 Lamp staffing - yes Capacity, m3/h - 93 Categories of premises - IV, V Lamp life timer - Yes Possibility to work in the presence of people - yes Bactericidal efficiency, % - 95.0 Lamp life, h - 8,000 Power consumption, W - 50 Length, mm - no more than 740 Width, mm - no more than 140 Height, mm - no more than 140 Weight, kg - no more than 2.5 Warranty period, months - 12 Filter element - Yes

The installation allows you to grow plants regardless of the time of year and weather conditions. Watering, ventilation and lighting of plants take place automatically. The system allows you to cultivate vegetable, berry, green, ornamental and medicinal plants. The equipment has a number of functions that allow you to identify the optimal modes of growing various crops: • Regulation of plant lighting modes • Plant nutrition management • Machine vision system (in the future, it will allow replacing humans and automatically controlling the microclimate, nutrition and lighting of plants to obtain maximum yields or plants with specified properties) These cultivation systems allow you to develop the following competencies: Chemistry – preparation of nutrient solutions; Biology – plant physiology, biochemistry, agronomy; Physics – spectral composition of light, hydrodynamics, energy supply of the system; Engineering – development of structural features of plant growing systems; IT – data collection and processing, training neural networks in decision-making algorithms; Economics – calculation of planting density, yield, and sales model. Growing plants in the city, in the vicinity of consumers, is mainstream all over the world. According to the UN, city farming will be the main direction of supplying fresh plant products to urban residents. In Russia, this area is especially relevant due to the natural and climatic characteristics of the country. The training of specialists and the development of this area will improve the quality of nutrition with vitamin products of the population and strengthen food security.

Vacuum spectrometers are designed for rapid analysis of alloys based on iron, copper, aluminum and other metals in factory and research laboratories, including the determination of elements having analytical lines in the field of vacuum ultraviolet (VUV) (for example, S, P and C in steels).