Search

The device is designed to analyze the phase composition and structural state of polycrystalline objects of various origins.

Technical characteristics: - Platform movement - reciprocating; - The operating frequency range of the platform vibrations is from 20 to 200 kol/min; - The swing of the platform - 10 mm; - Platform dimensions - 315x210 mm; - Platform capacity: flat-bottomed flask 1000 ml - 2 pcs; flat-bottomed flask 500 ml - 2 pcs; flat-bottomed flask 100 ml - 4 pcs; - Maximum power consumption - 120 W; - AC power supply (50 Hz) - 220 ± 10 V; - Overall dimensions - 350x295x150 mm; - Weight - 13.0 kg.

The microprocessor control module allows the user to set the values of the temperature control parameters, calibrate and, if necessary, correct the readings of the built-in temperature sensor; displays information about the current state of the system; performs fault diagnostics, storing information in memory until the next check, and also provides automatic shutdown of the device when the working fluid level drops below the permissible level. Thermometers are installed in a three-tiered stainless steel tripod. Technical specifications: Temperature range, °C without external cooling (Current+10)...+150 with tap water cooling (Tvody+5)...+150 with cryostat cooling 0+150 Number of places for thermometers 15

Furniture for laboratory work. Desk Length, mm: 1200 Depth, mm: 700 Height, mm: 760 COMPLETE SET table top, base and pedestal – melamine thickness 16mm built-in shelf length 644mm at a distance of 120mm from the countertop

Devices capable of generating oxygen have found the widest application in various fields of medicine. The equipment is also used in training centers, educational institutions and oxygen rooms. Medical oxygen concentrators allow to accelerate the recovery of patients suffering from cardiovascular diseases, chronic respiratory diseases, as well as other pathologies that make it difficult to saturate the blood with oxygen. This equipment is a mandatory equipment for anesthesiology and intensive care units. Oxygen concentrators demonstrate high efficiency in restorative treatment. Unlike oxygen sources, which use compressed gas, generators are characterized by high safety and efficiency Capacity: 800 l/min 48.0 m3/h 63.8 kg/h Oxygen purity: 95 % Oxygen pressure: 4-5 bar

Furniture for laboratory work. Length, mm: 800 Depth, mm: 580 Height, mm: 780 body – melamine 16 mm thick 1 compartment 1 built-in shelf

The arrangement of the locker room is required both in factories, laboratories and other production sites, and fitness centers. Two main requirements are most often applied to lockers – durability and aesthetics, which directly affect the mood of employees or visitors. Choose really high–quality furniture for your organization - it's not difficult with Simple PRO. Width - 400

The volume of the heated flask, ml 50-250 Maximum heating temperature, °C 600 Dimensions, mm 170x230x160 Power, W 550 Weight, kg 3

The analyzer allows you to determine the content of sulfur and nitrogen in oil and petroleum products (diesel fuel, gasoline, kerosene, gas oil and any distillate petroleum products), hydrocarbon gas, liquefied petroleum gas (LPG), natural gas, liquefied natural gas (LNG), chemical synthesis products, biological materials by ultraviolet fluorescence and chemiluminescence. The analyzer is a proprietary development of NPO "SPEKTRON". The device is manufactured in St. Petersburg mainly from domestic components. There is a conclusion of the Ministry of Industry and Trade on the production of products in the territory of the Russian Federation. The analyzer is designed to determine: - mass fraction of sulfur in accordance with GOST ISO 20846-2016, GOST 34712-2021, GOST R 56866-2016, GOST 34237-2017, ASTM D5453-19, ASTM D6667-21, ASTM D7551-15, ISO 20729-17 ; - the mass fraction of nitrogen in accordance with ASTM D4629-17. A wide range of concentrations: from ultra-low to high. Modular principle: Each detector is a separate module. The device is equipped individually for each specific task. The possibility of simultaneous determination of sulfur and nitrogen in the analysis process. The principle of operation of the analyzer is to burn the test sample in an oxygen-enriched atmosphere or air at a temperature of 1050 ° C. The sulfur dioxide (SO2) and nitrogen oxide (NO) formed during combustion are transferred by carrier gas to the detection units with preliminary removal of water vapor, on the desiccant, and soot, on the filter. Determination of sulfur is carried out by ultraviolet fluorescence. Determination of nitrogen by chemiluminescence.

The XRF analyzer BRA-135F is an energy dispersive spectrometer which can simultaneously determine the presence of up to twenty chemical elements - from 9F to 92U - in the analyzed sample. Samples can be in liquid, solid, powdered or deposited on a substrate. The analyzer captures concentrations from tenths of mg/kg. The model BRA-135F performs quantitative/semi-quantitative spectral analysis of steel and alloys. It also performs spectral analysis of oil, petroleum and other petroleum products, detecting in their composition even the smallest concentrations of impurities of various metals. The vacuum sample chamber and ultra-slim detector inlet provides a low detection limit in the range of light elements from 9F to 17Cl. The high-performance silicon drift detector (SDD) with an energy resolution of less than 135eV allows the separation of spectral lines of almost all elements, which makes the analysis of complex multicomponent substances (high-alloy steels, precision alloys, polymetallic ores, etc.) possible.