LOIP

Furniture for laboratory work. Hinged cabinet with 2 doors Length, mm: 1500 Depth, mm: 330 Height, mm: 690 PACKAGE CONTENTS case – melamine 16mm thick 2 compartments (left and right 450mm long, central 535mm long) 1 built-in shelf in the left and right compartment 1 removable shelf in the central compartment suspension fasteners included

Furniture for laboratory work. Table-sink on a support pedestal made of metal LAB-M MO ME 75.60.90 PP Width: 750 Depth: 600 Height: 900 Equipment: table top – a single module made of polypropylene. Attention! It is not recommended to use it for work with oil and petroleum products (fuel oil, bitumen, etc.) The inner size of the bowl – 500*400*290 mm

Island table One-piece table top: LAMINAT Length, mm: 900 Depth, mm: 1500 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Four easily removable screens (RAL 7035) and two non-removable screens (RAL 5023) Adjustable supports (0-40 mm) A set of end boxes-plugs

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

Furniture for laboratory work. Filing cabinet Length, mm: 500 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – white melamine with a thickness of 16 mm facades: - lower compartment – white melamine with dark gray ABS edge - upper compartment – tinted light grey glass 2 compartments (upper 686 mm high, lower 1076 mm high) 5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower) with the possibility of rearrangement on 3 levels in height each).

The working surface is combined: the main table top TRESPA TopLabPlus 16/23mm with a side made of composite material based on epoxy resins (the height of the side above the table top is 7 mm, depth 30 mm) with a depth of 650 mm / auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1500 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Design features: Special system of air intake and exhaust of combustion products with adjustable thrust; Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step; Manual heating mode with timer with sound notification and auto-off; Durable ceramic muffle; Closed heaters on four sides of the chamber; Backlit graphic display; Conveniently located control panel; Automatic shutdown of heating when opening the door; Sound and light alarms; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x110x285 mm Overall dimensions, WxHxD, not more than mm 505x955x655 Rated supply voltage, 220 V Rated power, W 3300

Furniture for laboratory work. Computer desk Length, mm: 1200 Depth, mm: 570 Height, mm: 760 COMPLETE SET table top, base and pedestal – melamine 16mm thick cabinet open (for installation of the system unit) sliding shelf 740mm long at a distance of 120mm from the table top

Table top to the island table on the support tables Material: LAMINATE Length, mm: 1200 Depth, mm: 1500

Metal single support cabinet with door Length, mm: 540 Depth, mm: 500 Height, mm: 860 Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather Frameless housing design One compartment with a swing door The side walls, the facade are double. The thickness of the side walls is 19 mm, the facade is 18 mm The facade is filled with noise-absorbing material, equipped with a lock Hinges with an opening angle of 270o Handle - polypropylene Easy-to-remove shelf with the possibility of installation at 3 different height levels. The shelf has a lock The permissible load on the shelf is 30 kg. Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base. 8 standard variants of LAB-PRO RP work surfaces

The LOIP LT-112a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid. Design features: The LOIP ATC intelligent control system adapts the parameters of the PID controller to the type of working fluid and eliminates the influence of instability of the mains voltage and air temperature on the operation of the system. A productive discharge pump ensures efficient mixing of the coolant inside the bath and high accuracy of maintaining the temperature of an external object with a closed circuit. A bright LED digital display displaying the current and set temperature with a discreteness of 0.1 °C. Multifunctional control knob. Simple correction of the internal temperature sensor readings with the possibility of calibration by two points. A cooling coil connected to the water supply to reach temperatures below room temperature (installed on request, not included as standard). Self-diagnosis system with indication of the causes of malfunctions on the display. A safety device with a sound and light notification that provides automatic shutdown of heating in the event of a break in the temperature sensor circuit, as well as when the coolant level drops below the permissible level. Stainless steel working baths, made by stamping, are characterized by a long service life and ease of cleaning. The external body of the bath is made of powder-coated steel and is reliably insulated from the tank of the bath, which allows the operator to work safely with the equipment even at high temperature of the working fluid. Technical specifications: Temperature range: without external cooling, °C Current +10 ... +100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 12 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 190x296/150 Overall dimensions, mm 355x335x370 Weight, kg 10.2

Combined working surface: STEEL main table top (single stainless steel module with anti-spill side) with a depth of 650 mm / auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1200 Depth, mm: 800 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)