LOIP

Features: Horizontal operation mode; Ceramic working pipe, with two plugs; Heaters are placed along the entire length of the working chamber to ensure fast and uniform heating of samples to the required temperature; The microprocessor temperature controller allows you to maintain the temperature with an accuracy of ± 10 ° C; Conveniently located control panel with a bright LED display for displaying the current and set temperatures with a discreteness of ± 1 °C; Highly efficient thermal insulation to minimize heat loss, which contributes to rapid heating of the chamber and reduces energy consumption; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint; LED indicators of heater operation and protection operation; Easy to manage and control. Technical specifications: Set temperature range 100 ...1200°C Operating temperature range1 300 ...1200°C The error of reproducing the set temperature, no more ± 10°C Instability of temperature maintenance, no more ± 10°C Rated supply voltage 220 V Total power consumption 2500 W Overall dimensions (WxDxH) 617x325x405 mm Inner diameter of the pipe 50 mm Pipe length 500 mm Heated pipe length 400 mm The length of the isothermal zone with Δt=10 °C 150 mm Weight 25 kg

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

Horizontal operation mode; Ceramic working pipe, with two plugs; Heaters are placed along the entire length of the working chamber to ensure fast and uniform heating of samples to the required temperature; The microprocessor thermostat allows you to maintain the temperature with an accuracy of ± 10 ° C; Conveniently located control panel with a bright LED display for displaying the current and set temperatures with a discreteness of ± 1 °C; Highly efficient thermal insulation to minimize heat loss, which contributes to rapid heating of the chamber and reduces energy consumption; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint; LED indicators of heater operation and protection operation; Easy to manage and control.

Furniture for laboratory work. Washing table on a metal support stand LAB-M MO30 ME 150.65.90 SS Width, mm: 1500 Depth, mm: 650 Height, mm: 900 Equipment: Table top – a single module made of stainless steel (AISI 304 steel) 1 Built-in bowl made of stainless steel AISI 304, the location of the bowl in the center Inner bowl size – 500*400*300 mm The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with dark gray powder paint RAL 7011, the side walls are made of sheet steel painted with white powder paint RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging

Wall-mounted table One-piece table top: TRESPA TopLabPlus 16/23mm with a side made of composite material based on epoxy resins, the height of the side above the table top is 7 mm, the depth is 30 mm Length, mm: 1500 Depth, mm: 800 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

Metal double support cabinet with 2 doors Length, mm: 1460 Depth, mm: 500 Height, mm: 860 Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather Frameless housing design Two compartments with a hinged door each The side walls, partition and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm The facades are filled with noise-absorbing material, equipped with a lock Hinges with an opening angle of 270o Handles - polypropylene In each compartment there is an easily removable shelf with the possibility of installation at 3 different height levels. The shelf has a lock The permissible load on the shelf is 30 kg Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base of 8 standard variants of LAB-PRO RP work surfaces

equipment side decorative panels – melamine 16mm thick all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

Table-sink LAB-M MO 150.60.90 PP Width, mm: 1500 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of polypropylene ATTENTION! It is not recommended to use the inner size of the bowl for work with oil and petroleum products (fuel oil, bitumen, etc.) – 500*400*285 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

BASIC EQUIPMENT Working box guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54) the front anti–spill side is acid-resistant polished stainless steel AISI 304 side panels – tempered glass 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather back and top panels – polypropylene LED lamp dust- and moisture-proof (22W IP65) switching box with automatic emergency power off 16A flange d=250mm (the distance from the rear panel to the center of the flange is 170mm) easily removable exhaust visors 3 exhaust levels (lower, side and front) counterweights are placed in the front pylon racks and are easily serviced Frame base is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather service panel is a metal box painted with powder paint (RAL 5023) with the texture of shagreen leather: adjustable supports.

Technical specifications: Temperature range, °C - without external cooling (Current +10)...+100 - with tap water cooling (Tvody+5) +100 - with cryostat cooling LOIP FT-311-25 0 ...+100 Accuracy of temperature maintenance, °C ± 0.1 Number of seats for cylinders 4 Cylinder dimensions (height*diameter), mm 500*50 Power consumption from the mains 220 V, W 2200 Volume of working fluid, l 30 Working fluid - up to 70 °C distilled water - above 70 ° C petroleum jelly or silicone oil, water-glycerin mixture Overall dimensions (WxDxH), mm 560x250x710 Weight of the device without liquid, not more than, kg 25

Furniture for laboratory work. Mounted storage cabinet Length, mm: 1200 Depth, mm: 350 Height, mm: 700 PACKAGE CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray three compartments. Central compartment – open, side - with hinged doors facades of side compartments – white melamine with dark gray ABS edge in the central compartment there is 1 built-in shelf, in each side compartment there is 1 easily removable shelf with the possibility of rearrangement at 5 levels in height the permissible load on the shelf is 20 kg.