Termeks

It is intended for placing vessels with samples in the working baths of the BNTI 05 04 bath when determining the low-temperature properties of petroleum products, if appropriate test vessels are available. Suitable for placing vessels with samples for the State Standard 20287 (Method A), EN 23015 or ASTM D97.

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type. Pump for closed or open type thermostating systems. All-metal stamped tub with a volume of 15 liters and a depth of 200 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 15 l Overall dimensions 420x330x480 mm The open part of the bath is 150x260 mm Bath depth 200 mm Weight 16 kg Power consumption 2.2 kW.

Operating temperature range +15...+100 °C Three places for glass viscometers. Overflow design ensures stability and uniformity of temperature not worse than ± 0.01 °C Bath volume 23 l Number of jobs 3 Overall dimensions 430x275x620 mm The open part of the bath is 130x155 mm Bath depth 315 mm The size of the viewing window is 170x285 mm Weight 26 kg Power consumption 2.2 kW

For thermostats operating at high temperatures and filled with an ICP coolant, a viton hose with a cross section of 10/14 should be used as a jumper hose.

Operating temperature range -70...+30 °C Two places for glass viscometers. The stability and uniformity of the temperature in the working bath is not worse than ± 0.02 ° C. Bath volume 16 l Overall dimensions 800x530x1210 mm The open part of the bath is 130x130 mm Bath depth 370 mm The size of the viewing window is 125x270 mm Weight 125 kg Power consumption 4.2 kW

The ratio of volumes of air and liquid chambers within 3.95 4.05. Overall dimensions 57x400 mm Weight 2 kg

The thermometer sensor ExT-01/2-6 is made in the form of a fully submersible probe with a cable length of 6 meters. The thermometer has an explosion protection marking 0Ex ia IIB T4 Ga X and can be used in explosive zones 0, 1 and 2 of any classes of premises and outdoor installations in which the formation of explosive mixtures of categories IIA, IIB is possible. • Measurement range -50...+130 °C Minimum sensor immersion depth full immersion Overall dimensions of the electronic unit 135x65x40 mm Electronic unit weight 0.3 kg

It is used to determine the corrosive effect of engine fuels on a copper plate in accordance with GOST 6321

The operating temperature range is +20...+200 °C. The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C. Bath volume 14 l Overall dimensions 315x330x460 mm The open part of the bath is 100x190 mm Bath depth 230 mm Weight 15 kg Power consumption 2.2 kW

It is designed to accommodate test tubes-2-16-150 in the bath of the TMP thermostat when testing the corrosive effect of engine fuels on a copper plate in accordance with GOST 6321. It can be used for temporary storage of test tubes after completion of tests.

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg

It is designed to maintain the set temperature of the liquid coolant circulating in the internal bath of the thermostat and in connected external consumers of closed or open type. Feeding and suction pump for external closed or open type thermostating systems. An internal bath with a volume of 27 liters and a depth of 200 mm. The operating temperature range is +5...+40 °C. Overall dimensions 420x710x840 mm The open part of the bath is 100x100 mm Bath depth 200 mm Weight 53 kg Power consumption 3.5 kW.