Termeks

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type. Pump for closed or open type thermostating systems. With a set of devices VT20-4K can be used for testing samples of asphalt concrete and oil bitumen. The operating temperature range is +20...+200 °C. Bath volume 20 l Overall dimensions 490x330x450 mm The open part of the bath is 240x200 mm Bath depth 210 mm Weight 16 kg Power consumption 2.2 kW.

It is designed to maintain the set temperature of the coolant circulating in the internal bath of the thermostat and in the connected external consumers. Feed pump for external closed-type thermostating systems. Cooling capacity 250 W at +20 °C. An internal bath with a volume of 6 liters and a depth of 140 mm. The operating temperature range is -20...+200 °C. Overall dimensions 280x460x620 mm The open part of the bath is 110x80 mm Bath depth 140 mm Weight 34 kg The power consumption is 2.5 kW.

It is used for determining the turbidity or fluidity temperature of petroleum products in accordance with EN 23015 and ASTM D97. For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required.

It can be used as an accurate universal thermometer for contact temperature measurement of non-aggressive liquid, bulk and gaseous media. It can be connected to a computer for calibration and transmission of measurement results. • Range of temperature measurements -50...+200 °C The minimum immersion depth of the sensor is 75 mm Overall dimensions of the electronic unit 80x75x100 mm Weight 0.25 kg

Silicone hose with an inner diameter of 8 mm is used to connect circulation coolers A160 and A300 with thermostats of the W series or to external consumers.

It is designed to prevent the flask from surfacing when it is thermostated in a laboratory bath or liquid thermostat.

It is suitable for all types of viscometers. It is placed in a thick tube of a capillary viscometer and allows you to evaluate the verticality of its installation by the position of the bubble indicator

Overall dimensions 1800x800x1905 mm Internal dimensions 1750x775x950 mm The diameter of the exhaust pipe is 200 mm Weight 165 kg

The total volume of the chamber is 65 l Overall dimensions 480x620x1070 mm Weight 33 kg Power consumption 200 W

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type. Pump for closed or open type thermostating systems. All-metal stamped tub with a volume of 25 liters and a depth of 200 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. The volume of the bath is 25 liters Overall dimensions 610x340x480 mm The open part of the bath is 360x260 mm Bath depth 200 mm Weight 17 kg Power consumption 2.2 kW.

It serves to increase the number of input channels. Up to 16 temperature sensors can be connected to the switch inputs simultaneously. Measurement time of 2 channels 1 s The time of setting the operating mode is 30 minutes Overall dimensions 185x150x25 mm Weight 1 kg

The operating temperature range is +95...+300 °C. The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C without the use of a leveling unit. Bath volume 14 l Overall dimensions 360x360x900 mm The open part of the bath is 90 mm Bath depth 520 mm Weight 35 kg Power consumption 2.2 kW