Termeks

The operation of the density meter is based on measuring the oscillation period of a hollow tube of the original configuration filled with the liquid under study, and then calculating the value of its density using the results of preliminary calibration for two substances of known density, for example, air and water. • Maximum viscosity of the measured liquid at ambient temperature 300 mm2/s The nominal volume of the measuring cell is 1.5 ml Measurement time of 2 channels 20 s • Temperature range of the built-in thermostat +15...+60 °C • • Overall dimensions 205x225x80 mm Weight 3 kg Power consumption 15 W

It is designed to maintain the set temperature of the coolant circulating in the connected external consumers. Feed pump for external closed-type thermostating systems. Cooling capacity 300 W at -80 °C. An internal bath with a volume of 9 liters and a depth of 200 mm. The operating temperature range is -90...+100 °C. Overall dimensions 510x800x1230 mm Weight 120 kg Power consumption 4.2 kW.

Operating temperature range 0...+50 °C Two places for glass viscometers. Stability and uniformity of temperature in the working bath is not worse than ± 0.01 ° C. Bath volume 12 l Overall dimensions 440x710x620 mm The open part of the bath is 165x85 mm Bath depth 300 mm The size of the viewing window is 130x270 mm Weight 55 kg Power consumption 3.5 kW

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Three workstations with a diameter of 110 mm with five steel O-rings. Stamped steel bath with a volume of 8 liters and a depth of 110 mm. Bath volume 8 l Overall dimensions 355x310x335 mm The open part of the bath is 295x235 mm Bath depth 110 mm Weight 9 kg Power consumption 2.5 kW

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. One workplace with a diameter of 110 mm with five steel O-rings. Stamped steel tub with a volume of 2.5 liters and a depth of 60 mm. Bath volume 2.5 l Overall dimensions 405x345x610 mm The open part of the bath is 235x130 mm Weight 5 kg Power consumption 2.5 kW

It is used in determining the flow temperature of petroleum products in accordance with GOST 20287 (method A). For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required

Four places for glass viscometers or a basket for determining the pour point of petroleum products. The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C. The operating temperature range is -30...+50 °C. Bath volume 15 l Overall dimensions 440x710x620 mm The open part of the bath is 140x170 mm Bath depth 320 mm The size of the viewing window is 104x270 mm Weight 56 kg Power consumption 3.5 kW

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of a closed or open type. Pump for closed or open type thermostating systems. All-metal stamped tub with a volume of 8 liters and a depth of 150 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 8 l Overall dimensions 315x330x400 mm The open part of the bath is 120x200 mm Bath depth 150 mm Weight 13 kg Power consumption 2.2 kW

It provides clear visibility of the labels of viscometers located in the thermostat bath. This creates additional convenience and increases the accuracy of measurements. It is located behind the working bath of the thermostat.

A small buffer bath with a volume of 4 liters. Feeding pump with magnetic coupling for external closed-type thermostating systems. Cooling capacity 300 W at +20 °C. Overall dimensions 275x440x350 mm Weight 26 kg Power consumption 1.2 kW

Operating temperature range -30...+100 °C Four places for glass viscometers or a basket for determining the pour point of petroleum products. The stability and uniformity of the temperature in the working bath is not worse than ± 0.02 ° C. Bath volume 15 l Overall dimensions 440x710x620 mm The open part of the bath is 140x170 mm Bath depth 320 mm The size of the viewing window is 104x270 mm Weight 56 kg Power consumption 3.5 kW

Platinum or copper resistance thermal converters with standard or individual calibration characteristics, thermocouples with HCX (types) can be used as primary temperature converters: B (PR30/6), E (HCn), J (LCn), K (HA), L (HC), N (CC),R (PR13/0), S (PR10/0), T (MCs) with standard calibration characteristics according to MTSH-90, as well as reference thermocouples of the CCI and TPR types with individual calibration characteristics. Overall dimensions 210x210x240 mm Weight 2.5 kg Power consumption 12 W