Primelab

The chemical-resistant diaphragm pump PL.HM03.01.45 is designed for a wide range of industrial and laboratory tasks, mainly related to pumping vapors/gases. The pumping speed is 38 l/min with a maximum residual pressure of 45 mbar. The device has fairly compact dimensions. Operates from a standard 220 V power supply. Does not require special preparation before use. Post-warranty and warranty service is available throughout the Russian Federation. Characteristics Valve(s) material Standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) A country Russia Power, W 180 Overall dimensions, L×W×H, mm 289x140x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB no more than 75 Nutrition 220 V/50 Hz Ultimate vacuum, mbar abs. 45 Excess pressure, bar. maximum allowable 0.5 Productivity, l/min 38 Fitting, inch (mm) External diameter, 9 mm. Maximum current, A 1.2 Device weight, kg 7.6 Working chamber material PTFE (polytetrafluoroethylene) Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

Along JSC 14/23 - 14/23 Primelab is a special accessory that is used to connect various installations and secure exchange between them. Provides a tight connection. It has chemical and thermal resistance and tolerates temperature changes well. Made from borosilicate glass 3.3. Connection to auxiliary equipment is made using a coupling grind (14/23) and a core (14/23). The total length of the allonge is 90 mm with a diameter of 6 mm.

Characteristics Valve(s) material Standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) A country Russia Overall dimensions, L×W×H, mm 322x140x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB 75 dBA Nutrition 230 V, 50 Hz Material working chamber PTFE (fluoroplastic) Ultimate vacuum, mbar abs. 10 for serial, 50 for parallel, 50x2 for independent connection Excess pressure, bar. Maximum permissible excess operating pressure 0.5 bar Productivity, l/min 76 with parallel, 38 with serial, 38x2 with independent connection Maximum current, A 1.2 Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately). Device weight, kg 8.6

Has a number of advantages: High chemical resistance; Excellent quality. The chambers are made of fluoroplastic, all elements are coated with fluoroplastic, and the valves are made of FFKM; Low noise level (up to 75 dBA); Different ways to connect cameras with the ability to change technical characteristics; Compact dimensions; Ease of use. Characteristics Valve(s) material FFKM (Perfluoro rubber) Working medium Gas Country Russia Chemical resistance Yes Overall dimensions, L×W×H, mm 321.5x140x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB 75 dB Power supply 230 V, 50 Hz Ultimate vacuum, mbar abs. 6/ 45/ 45 (serial/parallel/independent connection) Excess pressure, bar. Max. permissible 0.5 bar Capacity, l/min 38/ 76/ 38x2 (series/parallel/independent connection) Drive rotation speed, rpm 1350 Maximum current, A 1.2 Device weight, kg 9 Working chamber material PTFE (polytetrafluoroethylene) Equipment: Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

The 2-liter heated magnetic stirrer PL-HR-atom is an indispensable device in any laboratory. The compact and powerful mixer allows high-quality mixing of small volumes of media that require additional heating. The device is easy to use: it is equipped with a knob-button for setting speed and temperature, which allows you to clearly set the desired characteristics; all values are clearly displayed on the display. Basic Range of operating speeds of the engine shaft, rpm 150-2000 Number of heating places - 1 Maximum volume of heated liquid, l - 2 The working surface of the stove is fire-resistant glass (glass ceramics) Size of the working surface of the plate, LxW, mm - 128 Maximum stove heating temperature, °C - +150 Protection class acc. to DIN EN60529 IP21 Characteristics Heating element power, W - 300 Discreteness of setting the set plate temperature, °C - 1 Accuracy of maintaining the plate temperature, % - 1 Resolution of displayed temperature, °C - 0.1 Connection – external temperature sensor PT1000 (sold separately) Power consumption, W - 300 Features of the model: 1. 7-segment display showing: - speed; - set and actual temperatures; - timer 99 min. Overall dimensions, LxWxH, mm 160x148x64 Device weight, kg 0.9

Колба плоскодонная П-2-50-22 Праймлаб из термостойкого стекла является надежным инструментом для выполнения различных химических реакций. В их числе смешивание, хранение, нагревание и охлаждение различных жидких составов. Вмещает до 50 мл веществ при высоте всего изделия в 100 мм. Диаметр шара равен 51 мм, а диаметр горлышка - 22 мм.

Колба коническая Кн-2-50-34 Праймлаб – незаменимый аксессуар любой биологической, химической и прочих лабораторий. Несмотря на компактные габариты, имеет удобную форму в виде устойчивого основания (51 мм) и узкого горла (34 мм). Рассчитана на работу с жидкостями, объем которых не превышает 50 мл. Общая высота колбы равна 85 мм. Выполнена из прочного боросиликатного стекла.

Vacuum membrane pump PL.HM02.01.6 Primelab is an effective device for creating a vacuum, as well as pumping gases and vapors. Depending on the tasks, you can achieve different device performance, which depends on the method of connecting the cameras. With a series connection, the capacity will be 38 l/min at a maximum vacuum of 6 mbar. Parallel connection of the chambers will lead to a pumping speed of 76 l/min at a maximum vacuum of 45 mbar, and an independent connection at the same vacuum will allow a performance of 38 l/min per chamber. The chemical-resistant diaphragm pump PL.HM02.01.6, developed and manufactured by the domestic company Primelab, meets IP20 protection class. It has a light weight of 8.6 kg and compact dimensions (321.5x140x200 mm). Helps you increase productivity and achieve flawless results in the laboratory.

The vacuum pump chamber is made of fluoroplastic, and other parts are coated with fluoroplastic, which ensures the high chemical resistance of the pump. It has a pumping speed of gases and vapors of 38 l/min at an extreme vacuum of 60 mbar. It is quite compact, so it can be placed in almost any already equipped space. Valve(s) material FFKM (Perfluoro rubber) Working medium Gas Country Russia Chemical resistance Yes Overall dimensions, L×W×H, mm 289.5x160x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB 75 dB Power supply 230 V, 50 Hz Ultimate vacuum, mbar abs. 60 Excess pressure, bar. Max. permissible 0.5 bar Productivity, l/min 38 Drive rotation speed, rpm 1350 Maximum current, A 1.2 Device weight, kg 7.6 Working chamber material PTFE (polytetrafluoroethylene) Equipment: Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

The PL.HM03.01.60 Primelab vacuum diaphragm pump is suitable for creating a vacuum up to 60 mbar and a flow rate of 38 l/min. It has a dry design that does not require lubrication. Quite easy to use and does not create any inconvenience during operation. Its noise level does not exceed 75 dB. With a light weight of 6.9 kg, it has compact dimensions (289.5x160x200 mm), allowing the pump to be integrated into an already equipped space. Complies with IP20 protection class. The PL.HM03.01.60 Primelab vacuum diaphragm pump is supplied in the following package: vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately). Warranty and post-warranty service is available in Russia.

Conical flask KN-2-2000-72 Primelab is a high-quality laboratory accessory made of heat-resistant borosilicate glass 3.3. It has an easy-to-work shape with a wide base of 131 mm and a relatively narrow neck of 72 mm. Designed to work with bulk and liquid substances, the volume of which does not exceed 2 liters. The total height of the flask is 280 mm.

The PrimeLab round-bottomed tube with a screw cap is made of heat-resistant borosilicate glass, which can be exposed to temperature changes. Suitable for working with chemically active substances, toxic and even poisonous. Due to the lid, which is screwed onto the test tube in a screw manner, the contents are isolated from external influences and leakage. The volume of the tube is 5 ml with a length of 100 mm and a diameter of 12 mm.