Primelab

Vacuum membrane pump PL.HM01.01.6 Primelab is a compact, chemical-resistant and efficient laboratory device made in Russia. Designed to create a vacuum, drying and filtration under vacuum conditions, as well as pumping steam-gas-air media. The Primelab company has developed a pump in accordance with IP20 protection class. Absolutely safe: its chambers are made of fluoroplastic, the connections are covered with a fluoroplastic coating. Productivity is 38 l/min at a maximum vacuum of 6 mbar. In operating mode, the noise level does not exceed 75 dB. In Russia, the Primelab vacuum diaphragm pump PL.HM01.01.6 is subject to warranty and post-warranty service. Supplied complete with everything you need to get started.

Flat-bottomed flask P-1-2000 29/32 Primelab is actively used as a reaction or receiving vessel due to its ground section measuring 29/32 and diameter 166 mm, spherical shape and thermal stability. Suitable for working with aggressive and toxic substances, the volume of which does not exceed 2 liters. The height of the entire product is 250 mm.

Bunsen flask 2-1000-29/32 with Primelab tube is made of chemically resistant laboratory glass. It has a flat, stable bottom with a side tube, on which olives are provided for a strong connection with the equipment. To get started, you need to insert a filter funnel into the neck and put a soft vacuum pump hose on the tube. Characteristics: • Volume – 1000 ml • Section size – 29/32 • Base diameter – 131 mm • Height 210 mm.

The PrimeLab reflux condenser is a device designed for condensation or rapid cooling of various samples. Thanks to its compact dimensions, it is suitable even for laboratories with limited space. Externally, the refrigerator has the shape of a wide elongated tube, inside of which there is a spiral for additional cooling of the samples. It is equipped with a 45/40 joint and GL14 threaded tubes for connection to other equipment. It has a flat bottom, making it stable for placement on a straight surface. The refrigerator is made of durable borosilicate glass, resistant to intensive use and mechanical stress. Possesses thermal and chemical resistance. Available for order from Primelab in any quantity.

The Bunsen flask 1-5000 with PrimeLab tube is made of durable laboratory glass, resistant to mechanical stress and intensive use. It has a conical shape with a wide base and a narrow neck, as well as a side tube (diameter 11 mm). The height of the entire product is 37 centimeters. Holds up to 5 liters of any reagent. To use, just put a plug on the neck and a vacuum pump hose on the tube.

A jar for reagents made of light glass PrimeLab, 500 ml is presented in the form of a container with a stable shape and a capacity scale for quickly determining the volume of contents. Designed for 500 ml. The neck with a diameter of 86 mm is equipped with a GL45 thread for screwing the cap included in the package. The total height of the can is 176 mm.

The flat-bottomed flask P-2-100-22 Primelab TS is made of borosilicate glass. It is characterized by wear resistance, strength and chemical resistance. It tolerates temperature changes well and is suitable for heating and sterilization in an autoclave. Most often used for the preparation of solutions, synthesis, filtration, distillation, etc. Suitable for working with substances whose volume does not exceed 100 ml. The neck diameter is 22 mm.

Conical flask KN-1-100-29/32 with Primelab divisions is intended for laboratory processes. Designed to work with liquid substances whose volume does not exceed 100 ml. For accurate measurements, a measuring scale is applied to the wall. The flask is made of heat-resistant glass in an easy-to-use form with a stable base. A grinding joint is provided with which the flask is securely attached to the equipment. Characteristics: • Base diameter - 64 mm • Section size - 29/32 • Height - 105 mm.

Primelab dark glass reagent jar, 500 ml is an excellent solution for protecting photosensitive substances from exposure to ultraviolet rays. Suitable for transporting, mixing or storing chemically active, poisonous or toxic substances of any consistency. Supplied with a lid. Characteristics: • Volume – 500 ml • Height – 176 mm • Diameter – 86 mm • Thread - GL45.

Primelab sand sauna, not included in delivery. Supplied separately. High-tech and productive magnetic stirrer with heating PL-HR-Steps, 20 liters, designed for laboratories of various profiles, including research and production purposes. The stirrer can mix at speeds up to 1500 rpm and heat up to +550 °C. The working platform is made of stainless steel, and the top covering is made of chemically resistant refractory glass (glass ceramics). The heated magnetic stirrer PL-HR-Steps has expanded functionality compared to the Basic modification. The Steps modification allows users to create and run their own special programs based on a graph of temperature and rotation speed versus time. The user can create a program by specifying a set of parameters for each step, including step duration, set temperature and rotation speed. The program subsystem provides flexible control of the heating and mixing process. The main functionality of the subsystem includes: • number of program steps from 1 to 5; • maximum step duration up to 990 minutes; • possibility of manual control control during program execution; • ability to run 1 program (heating/rotation). The PL-HR-Steps stirrer does not support "Gentle heating" modes. The user selects temperature, speed and time settings using two round knobs. The digital display shows the set and actual characteristics, as well as icons of the processes and functions being performed. The set parameters are saved in non-volatile memory. After heating is turned off, a warning about a hot platform is displayed on the screen. There is protection against overheating: at +550 °C the electric heating element automatically turns off. The stirrer is compatible with the PT1000 temperature sensor. The device is equipped with an armature failure monitoring function: if the rotation stops, the electric motor restarts. Main characteristics: • Orange color • Protection class (according to DIN EN60529): IP21 • Working surface of the platform: fireproof glass (glass ceramics) • Number of mixing places: 1 • Maximum volume of mixed liquid: 20 l • Motor power: 16 W • Range of operating speeds of the motor shaft: 50-1500 rpm • Discreteness of setting the specified rotation speed: 10 rpm • Maximum platform heating temperature: 550 °C • Resolution of setting the set temperature: 1 °C • Temperature maintenance accuracy: 1% • Power consumption: 1020 W • Overall dimensions LxWxH: 350x220x120 mm • Platform working surface size LxW: 200x200 mm • Device weight: 4.4 kg Primelab sand sauna, not included in delivery. Supplied separately.

The jar for reagents, dark glass PrimeLab, 10000 ml is equipped with a lid that closes firmly thanks to the GL45 thread on the neck of the container. Protects against leakage and evaporation. The wall has an area for notes and a measuring scale for quickly determining the volume of contents. Characteristics: • Volume – 10000 ml • Height – 410 mm • Diameter – 234 mm • Thread - GL45.

The vacuum membrane pump PL.HM01.02.10 Primelab is designed for pumping steam-gas-air media, creating a vacuum, vacuum filtration and drying. The valves are made of FFKM, the chambers are made of fluoroplastic, all connecting elements and parts are coated with fluoroplastic. The pump has good performance despite its compact dimensions (321.5x160x200 mm). At a maximum pressure of 10 mbar it is capable of pumping up to 38 l/min. Does not require constant maintenance. Complies with IP20 protection class. It has a low noise level (up to 75 dB), which does not create discomfort for laboratory staff. Supplied complete with equipment sufficient for assembly and start-up.