Accessories

A glass with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237. Internal dimensions 103x170 mm Weight 0.3 kg

It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).

The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm. It is designed for THERMOTEST 05 and THERMOTEST-05-1 thermostats.

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

Technical specifications: Residual capacity when working with immitance meters < 1 pF Residual inductance when working with immitance meters < 0.5 µgn Residual resistance when working with immitance meters < 0.05 ohms Maximum input voltage ±60 V Distance between measuring contacts from 0 to 6 mm Length 1050 mm Weight 160 g

The 2MO-5 oil separator is installed on the exhaust flange of the pump by means of a quick-release connection, and can also be connected through a pipeline, if there is no possibility of placement on the exhaust flange. If you purchase the 2MO-5 oil separator as an independent product, it is necessary (only for the 2NVR-5DM pump, which has threads in the housing) to remove the pump housing and the exhaust olive, install the fitting instead of the olive with a nut and seal, lay the mesh inside the fitting, install the oil separator with a quick-release clamp, ring and seal.

Number of sockets, pcs 11 Hole diameter, mm 25 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Inner diameter, mm 6 Outer diameter, mm 8

The VT-002 vibration transducers are designed to convert the instantaneous value of the vibration acceleration of an object into an ICP signal of the IEEP standard.