ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Vakuummash

Kazan

fitting

general laboratory

vacuum

accessories

Produced in: Kazan

CF transition flanges

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Bolts and nuts for DIN flanges with a side

DIN EN 1092-1 fixed flange fittings.

Kazan

Produced in: Kazan

2 supp.

The size of DN: 10,16,20,25,32,40,50.

Kazan

Produced in: Kazan

Set of hexagon bolts for CF flanges

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Crimping centering rings (aluminum) with O-ring of circular cross-section

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

Kazan

Produced in: Kazan

Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section

Kazan

Produced in: Kazan

O-ring seal with support ring

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Crimp support rings (stainless steel) for sealing rings with high sealing capacity

Kazan

Produced in: Kazan

Set of screws, nuts and washers for CF flanges

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Vacuum sealing discs for ISO-F flanges (aluminum/CR)

Kazan

Produced in: Kazan

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Claw clips in the groove

Size of DN: 10,16,20,25,32,40,50.

Kazan

Produced in: Kazan

Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)

Kazan

Produced in: Kazan

Claw clamps (galvanized steel) for ISO-K

Kazan

Produced in: Kazan

ISO-F flanges with a side and a locking ring for clamping flange connections (steel)

Kazan

Produced in: Kazan

Sealing rings with high sealing capacity for SVV joints (aluminum)

Kazan

Produced in: Kazan

May be interested in

Spring THERMOTEST holder-DP1-9/16

Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 9 to 16 mm. The design of the holder eliminates damage to glass thermometers. It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.

Tomsk

Produced in: Tomsk

CRYO-VIS-T-05-P stand

It provides convenience in measurements, allowing you to install viscometers at eye level. The wheels make it easy to move heavy thermostats when needed. Overall dimensions 650x450x550 mm

Tomsk

Produced in: Tomsk

Tripod for test tubes LA-208

Number of sockets, pcs 15 Hole diameter, mm 22 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Heating element for distiller 2.7 kW 220 V

from 1 860 ₽

The tank for the 2.7 kW aquadistillator is made of stainless steel.

Belgorod

Produced in: Belgorod

A set of BNTI devices-05-04- 4K

It is intended for placing vessels with samples in the working baths of the BNTI 05 04 bath when determining the low-temperature properties of petroleum products, if appropriate test vessels are available. Suitable for placing vessels with samples for the State Standard 20287 (Method A), EN 23015 or ASTM D97.

Tomsk

Produced in: Tomsk

Distilate cooler for the AE-25 distiller

from 8 550 ₽

The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.

Belgorod

Produced in: Belgorod

A set of devices of the TMP-K-6321

It is used to determine the corrosive effect of engine fuels on a copper plate in accordance with GOST 6321

Tomsk

Produced in: Tomsk

Adapters for CF / ISO-KF SVB connections

ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

CF transition flanges

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Set of devices GOST 11851 method A

It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.

Tomsk

Produced in: Tomsk

It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2. Ventilation openings are nedeed for better convection of the coolant. Internal dimensions 290x250x140 mm Weight 2.5 kg

Tomsk

Produced in: Tomsk

Bolts and nuts for DIN flanges with a side

DIN EN 1092-1 fixed flange fittings.

Kazan

Produced in: Kazan

Temperature equalization unit THERMOTEST-B1

It is designed to improve short-term temperature stability during verification and calibration of electronic thermometers LT 300 (except LT-300-F), LT and ExT-01/1 in calibration thermostats TERMOTEST 100, TERMOTEST-100-40, TERMOTEST 05 and TERMOTEST-05-1.

Termeks

Tomsk

general laboratory

temperature equalization unit

accessories

Tomsk

Produced in: Tomsk

Stand MTIf-P

The stainless steel stand is designed for installation and storage of pressure gauges MTIf 100, MTIf 160 and MTIf 400 in the process of determining the absolute vapor pressure of volatile crude oil and volatile non-viscous petroleum products. Overall dimensions 170x95x105 mm Weight 0.5 kg

Tomsk

Produced in: Tomsk

2 supp.

The size of DN: 10,16,20,25,32,40,50.

Kazan

Produced in: Kazan

Gas-tight container "GPK-10.0,9/9"

Gas-tight containers "GPK-10.0,9/9" are intended for use as part of the shaft furnaces "SSHO-10.5.22/10" for heat treatment in an oxidizing environment. Optionally, the gas supply and mixing system "SPSG" is supplied.

Tula

Produced in: Tula

Reviews

There are no entries.