Catalog
Back to search results
CF flanges with a branch pipe
Back to search results
CF flanges with a branch pipe
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
CF plugs, non-rotating CF flanges
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Adapters for CF / ISO-KF SVB connections
ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Profile gasket without support ring
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Bolts and nuts for DIN flanges with a side
DIN EN 1092-1 fixed flange fittings.
Vakuummash
Kazan
Produced in: Kazan
Bolts with mounting plate and gaskets
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Bolts, nuts and washers for connection to the gates of the VAT series
Vakuummash
Kazan
Produced in: Kazan
Set of hexagon bolts for CF flanges
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
CF transition flanges
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Centering rings (aluminum / stainless steel with O-ring of circular cross-section
Vakuummash
Kazan
Produced in: Kazan
Tees
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
CF rotating caps
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
ISO-F flanges with a side and a locking ring for clamping flange connections (steel)
Vakuummash
Kazan
Produced in: Kazan
KF flanges with compression fitting
Size of Dn: 10,16,20,25,32,40,50.
Vakuummash
Kazan
Produced in: Kazan
Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
USB-RS485 Adapter
It is used to connect TDS thermometers and MASTER thermostats equipped with an RS 485 interface to a personal computer via a USB interface.
The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.
Termeks
Tomsk
Produced in: Tomsk
Tripod for test tubes LA-208
Number of sockets, pcs 15
Hole diameter, mm 22
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 180x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
CF plugs, non-rotating CF flanges
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Heating element for a 2.4 kW 220 V distiller
from
1 860 ₽
The tank for the 2.4 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
Adapters for CF / ISO-KF SVB connections
ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Profile gasket without support ring
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Distilate cooler for the AE-25 distiller
from
8 550 ₽
The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.
Livam
Belgorod
Produced in: Belgorod
Holder THERMOTEST-D2-16/20
The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm.
It is designed for THERMOTEST 05 and THERMOTEST-05-1 thermostats.
Termeks
Tomsk
Produced in: Tomsk
Set of devices for BNTI-05-04 State Standard 20287 method B
It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).
Termeks
Tomsk
Produced in: Tomsk
Bolts and nuts for DIN flanges with a side
DIN EN 1092-1 fixed flange fittings.
Vakuummash
Kazan
Produced in: Kazan
Quartz cuvette
from
1 700 ₽
Designed for devices of the SF, Minigem, Specord series when operating in the spectral range from 260 to 2500 nm. Chemically resistant to acids (except hydrofluoric acid) and dilute alkalis.
MiniMed
Suponevo
Produced in: Bryansk region
Set of devices State Standard 5066 method B
It is designed to be placed in a liquid thermostat CRYO T 05 01 and is used to determine the turbidity temperature and the beginning of crystallization of motor fuel in accordance with GOST 5066 (method B).
For testing, an additional set of CRYO T 05 01 K devices is required.
Termeks
Tomsk
Produced in: Tomsk
Basket MT-21-K
The basket with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237.
Internal dimensions 103x170 mm
Weight 0.3 kg
Termeks
Tomsk
Produced in: Tomsk
Tripod for test tubes LA-207
Number of sockets, pcs 21
Hole diameter, mm 17
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 180x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Heating element for 1.5 kW 220 V distiller
from
1 980 ₽
The tank for the 1.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod