Language selection
Внимание! 06.04.2026 с 21:00 до 24:00 по по Московскому времени работа портала будет приостановлена для проведения технических работ. В настоящее время портал работает нестабильно.
Catalog
Back to search results
CRYO basket-VT-06-2K
Back to search results
CRYO basket-VT-06-2K
It is designed for simultaneous placement of four settling tanks with a capacity of 100 ml and two settling tanks with a capacity of 500 ml in the inner bath of the liquid low-temperature thermostat CRYO VT 06 when determining the liquid residue, free water and alkali in liquefied hydrocarbon gases.
Internal dimensions 295x205x180 mm
Weight 3 kg
Internal dimensions 295x205x180 mm
Weight 3 kg
Basket T40-K
It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat.
A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Overall dimensions 305x305x390 mm
Internal dimensions 260x250mm
Weight 2.8 kg
Termeks
Tomsk
Produced in: Tomsk
LB63-140/4K Basket
Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth.
Overall dimensions 515x310x215 mm
Weight 3.5 kg
Termeks
Tomsk
Produced in: Tomsk
LB63-32/50K Basket
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Overall dimensions 515x310x215 mm
Weight 2.8 kg
Termeks
Tomsk
Produced in: Tomsk
Basket MT-21-K
The basket with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237.
Internal dimensions 103x170 mm
Weight 0.3 kg
Termeks
Tomsk
Produced in: Tomsk
LB61-85/8K Basket
Eight workstations with a diameter of 85 mm with three steel O-rings and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth.
Overall dimensions 515x310x210 mm
Weight 3.3 kg
Termeks
Tomsk
Produced in: Tomsk
LB33-30/24K Basket
It is designed to accommodate twenty-four tubes with a diameter of 30 mm when thermostated in a laboratory bath LB33 or LB33-Sh.
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Overall dimensions 310x250x210 mm
Weight 1.5 kg
Termeks
Tomsk
Produced in: Tomsk
CRYO-W Basket-12-12/ 26K
It is designed to accommodate 26 tubes with a diameter of up to 12 mm when thermostated in the inner bath of a low-temperature liquid thermostat CRYO-VT-12 or CRYO-VT-12-1.
Overall dimensions 130x78x170 mm
Weight 0.2 kg
Termeks
Tomsk
Produced in: Tomsk
Basket VT12-K
The height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Internal dimensions 290x160x150 mm
Weight 1.5 kg
Termeks
Tomsk
Produced in: Tomsk
CRYO-MT-17-K basket
The height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Internal dimensions 110x128x240 mm
Weight 1.5 kg
Termeks
Tomsk
Produced in: Tomsk
Basket VT14-K-PZH25
The height-adjustable bottom allows the tanks to be immersed in the coolant to the required depth.
Internal dimensions 150x90 mm
Weight 1 kg
Termeks
Tomsk
Produced in: Tomsk
Basket VT12-18/24K
It is designed to accommodate twenty-four tubes with a diameter of 18 mm during thermostating in the inner bath of the liquid thermostat VT12 or VT12-2.
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Overall dimensions 280x165x210 mm
Weight 1.1 kg
Termeks
Tomsk
Produced in: Tomsk
CRYO basket-VT-01-K
It is designed to accommodate various objects in the inner bath of the CRYO thermostat VT 01.
The height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Internal dimensions 105x175x250 mm
Weight 1 kg
Termeks
Tomsk
Produced in: Tomsk
LB12-18/8K Basket
Eight holes with a diameter of 17 mm will serve to accommodate glass tubes, the remaining nine ventilation holes — for better convection of the coolant.
Internal dimensions 240x120x210 mm
Weight 1 kg
Termeks
Tomsk
Produced in: Tomsk
LB13-18/24K Basket
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Internal dimensions 255x150x215 mm
Weight 1 kg
Termeks
Tomsk
Produced in: Tomsk
Set of VT18-K devices
The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath.
Overall dimensions 350x260x70 mm
Weight 2.1 kg
Termeks
Tomsk
Produced in: Tomsk
Basket T40-32/36K
A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Overall dimensions 305x305x390 mm
Internal dimensions 260x250mm
Weight 3.1 kg
Termeks
Tomsk
Produced in: Tomsk
Centering rings with fine filter (stainless steel) and O-ring (FPM)
Vakuummash
Kazan
Produced in: Kazan
Stand MTIf-P
The stainless steel stand is designed for installation and storage of pressure gauges MTIf 100, MTIf 160 and MTIf 400 in the process of determining the absolute vapor pressure of volatile crude oil and volatile non-viscous petroleum products.
Overall dimensions 170x95x105 mm
Weight 0.5 kg
Termeks
Tomsk
Produced in: Tomsk
Heating element for a 3.5 kW 220 V distiller
from
1 860 ₽
The tank for the 3.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
CF Adapters
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Distilate cooler for distiller ADE-40/50
from
11 520 ₽
The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.
Livam
Belgorod
Produced in: Belgorod
Cuvette for BILIMET
from
4 300 ₽
The cuvette is made of K-8 glass. It consists of 2 rectangular plates, measuring 80x20 mm.
MiniMed
Suponevo
Produced in: Bryansk region
Tripod for test tubes LA-203
Number of sockets, pcs 33
Hole diameter, mm 17
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 235x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Sealing discs with high sealing capacity for SVB joints (aluminum)
Vakuummash
Kazan
Produced in: Kazan
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
A set of CRYO-VT-01-2K devices
It is used for testing in accordance with GOST 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
Heating element for a 1.3 kW 220 V distiller
from
1 860 ₽
The tank for the 1.3 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
A set of electrodes for a DE distiller
for water heating (in DE series aquadistillators)
Livam
Belgorod
Produced in: Belgorod
A set of BNTI devices-05-04- 3K
It is used for determining the low-temperature characteristics of petroleum products in accordance with the State Standard 20287 (Method A), EN 23015 and ASTM D97
Termeks
Tomsk
Produced in: Tomsk
Stand VT-R-P
It is the stand for thermostats W R 01 and W R 03.
It provides convenience when measuring, allowing you to install pressure gauges at eye level.
Overall dimensions 400x625x420 mm
Termeks
Tomsk
Produced in: Tomsk
Heating element for distiller 2.7 kW 220 V
from
1 860 ₽
The tank for the 2.7 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
Tripod for test tubes LA-201
Number of sockets, pcs 33
Hole diameter, mm 17
Immersion depth, mm 150
Overall dimensions (WxDxH), mm 235x80x165
LOIP
Saint Petersburg
Produced in: Saint Petersburg