Language selection
Внимание! 06.04.2026 с 21:00 до 24:00 по по Московскому времени работа портала будет приостановлена для проведения технических работ. В настоящее время портал работает нестабильно.
Catalog
Back to search results
Set of devices for CRYO-T-05-01 the State Standard 20287 method B
Back to search results
Set of devices for CRYO-T-05-01 the State Standard 20287 method B
It is used for determining the pour point of petroleum products in accordance with GOST 20287 (method B).
VIS-T-D4 Holder
It is the holder with spring clip for working viscometers of types VPJ 1, VPJ 2, VPJ 4, residence permit, Cannon Fenske Routine, Cannon FenskeOpaque, Ubbelohde, BS/IP/RF.
Termeks
Tomsk
Produced in: Tomsk
A set of CRYO-VT-01-2K devices
It is used for testing in accordance with GOST 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
A set of BNTI devices-05-04- 3K
It is used for determining the low-temperature characteristics of petroleum products in accordance with the State Standard 20287 (Method A), EN 23015 and ASTM D97
Termeks
Tomsk
Produced in: Tomsk
A set of VT20-4K devices
It is used for testing in accordance with the State Standart 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
LT-FD sensor case
If you are going to use an electronic thermometer LT 300, LT or LTA not in the laboratory, but in the non-laboratory condiditions, this durable case with a lid will protect the sensor from damage.
The size of the case is determined by the length of of your thermometer.
Termeks
Tomsk
Produced in: Tomsk
Spring THERMOTEST holder-DP1-3/9
Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 3 to 9 mm.
The design of the holder eliminates damage to glass thermometers.
It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.
Termeks
Tomsk
Produced in: Tomsk
A set of CRYO-T devices-05-01- K
It is used in determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 5066 (Method B) and GOST 18995.5.
Termeks
Tomsk
Produced in: Tomsk
A set of devices of the TMP-K-6321
It is used to determine the corrosive effect of engine fuels on a copper plate in accordance with GOST 6321
Termeks
Tomsk
Produced in: Tomsk
Set of devices GOST 11851 method A
It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.
Termeks
Tomsk
Produced in: Tomsk
Set of devices for CRYO-VIS-T-06 the State Standard 20287 method B
It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).
Termeks
Tomsk
Produced in: Tomsk
VIS-T-D3 Viscometer Holder
It is designed for use in CRYO VIS T 05 and CRYO VIS T 05 01 thermostats until 2016.
Termeks
Tomsk
Produced in: Tomsk
Sensor holder LTA-4DSH14
The stopper holder made of Teflon allows you to mount securely the temperature sensor of LTA electronic thermometers with a diameter of 4 mm in the 14/23-inch laboratory glassware.
Termeks
Tomsk
Produced in: Tomsk
A set of CRYO-VT-06-6K devices
It is used for testing in accordance with the State Standart 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
Set of devices for BNTI-05-04 State Standard 20287 method B
It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).
Termeks
Tomsk
Produced in: Tomsk
Holder THERMOTEST-D2-16/20
The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm.
It is designed for THERMOTEST 05 and THERMOTEST-05-1 thermostats.
Termeks
Tomsk
Produced in: Tomsk
Centering rings with fine filter (stainless steel) and O-ring (FPM)
Vakuummash
Kazan
Produced in: Kazan
Stand MTIf-P
The stainless steel stand is designed for installation and storage of pressure gauges MTIf 100, MTIf 160 and MTIf 400 in the process of determining the absolute vapor pressure of volatile crude oil and volatile non-viscous petroleum products.
Overall dimensions 170x95x105 mm
Weight 0.5 kg
Termeks
Tomsk
Produced in: Tomsk
Heating element for a 3.5 kW 220 V distiller
from
1 860 ₽
The tank for the 3.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
CF Adapters
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Distilate cooler for distiller ADE-40/50
from
11 520 ₽
The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.
Livam
Belgorod
Produced in: Belgorod
Cuvette for BILIMET
from
4 300 ₽
The cuvette is made of K-8 glass. It consists of 2 rectangular plates, measuring 80x20 mm.
MiniMed
Suponevo
Produced in: Bryansk region
Tripod for test tubes LA-203
Number of sockets, pcs 33
Hole diameter, mm 17
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 235x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Sealing discs with high sealing capacity for SVB joints (aluminum)
Vakuummash
Kazan
Produced in: Kazan
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
A set of CRYO-VT-01-2K devices
It is used for testing in accordance with GOST 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
Heating element for a 1.3 kW 220 V distiller
from
1 860 ₽
The tank for the 1.3 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
A set of electrodes for a DE distiller
for water heating (in DE series aquadistillators)
Livam
Belgorod
Produced in: Belgorod
A set of BNTI devices-05-04- 3K
It is used for determining the low-temperature characteristics of petroleum products in accordance with the State Standard 20287 (Method A), EN 23015 and ASTM D97
Termeks
Tomsk
Produced in: Tomsk
Stand VT-R-P
It is the stand for thermostats W R 01 and W R 03.
It provides convenience when measuring, allowing you to install pressure gauges at eye level.
Overall dimensions 400x625x420 mm
Termeks
Tomsk
Produced in: Tomsk
Heating element for distiller 2.7 kW 220 V
from
1 860 ₽
The tank for the 2.7 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
Tripod for test tubes LA-201
Number of sockets, pcs 33
Hole diameter, mm 17
Immersion depth, mm 150
Overall dimensions (WxDxH), mm 235x80x165
LOIP
Saint Petersburg
Produced in: Saint Petersburg