Equipment

Measurement of mass concentration in liquid and volume fraction of hydrogen in gases, temperature Monitoring of concentrations (including small ones) of dissolved hydrogen at energy facilities, in technological processes in various industries: in a gas trap, in bearing crankcases, shielded current lines, linings and zero terminals, residual hydrogen in oxygen after electrolysis; oxygen content in hydrogen inside the generator housing, in a float hydraulic seal, tank purge and hydrogen separation tank of the generator oil cleaning unit. 24 months warranty for deliveries across the Russian Federation Automatic temperature and barocompensation Three measurement modes KRV (concentration of dissolved hydrogen), mcg/dm3 % of volume share Temperature, °C Long-lasting, highly stable sensor The service life of the hydrogen sensor is at least 10 years High contrast LCD indicator Low power consumption Up to 2000 hours of continuous operation from a set of AA type elements Easy calibration with a standard calibrator

The LI-630 integrated flanged trap is installed inside the diffusion pump instead of the standard oil reflector, without increasing the overall dimensions of the diffusion pump. The LI-630 trap performs the function of an oil reflector, is installed instead of a standard oil reflector in pumps, has an additional number of cooled screens for capturing oil return flow vapors (more than that of the MU trap), covers the entire area of the input high-vacuum flange.

Technical characteristics: NIP, G5100 Discreteness, g1,0 External calibration Size of the scale bowl/platform, mm175x145 The smallest weighing limit, g50 The limits of permissible error during initial verification, mgot 50.0g to 5000g incl. ± 500; sv. 5000g to 5100g incl. ±1000 in accordance with GOST OIML R 76-1-2011 Accuracy class according to GOST OIML R 76-1-2011II is high Weight adjustment 2kgF2* The time of setting the readings, s, no more than ~ 1 - 1.5 7 years warranty

Operating Mode: Continuous Output stabilized current, A: 1-100 Output voltage, V: 0-14 Power supply: Single-phase mains 220 V; 50 Hz Operating temperature range, °C: +10...+35 Storage temperature, °C: -20...+45 Relative humidity (without condensation), %: 90 Weight, kg: 3.8 Overall dimensions (W x H x D), mm: 225 x 85 x 220

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-75P, where 75 indicates the volume of the furnace working chamber in liters. Power consumption – 3500 W Dimensions of the working chamber WxDxH- 205x200x185 mm Dimensions WxDxH- 460x580x550 mm Weight – 54* kg (* - with control unit)

High-temperature industrial drying cabinet SNOL 3000/5 with a working chamber volume of 3000 liters and a maximum operating temperature of 500 degrees with software

The field of fast and thermal neutrons in a collimated beam Fast neutron field in “open” geometry using a screening cone according to ISO 8529-2 Drum source magazine with polyethylene and concrete protection at a depth of 1 meter Software control of the movement of sources and positioning of the mobile platform An alarm and blocking systems, radiation monitoring Control from the operator panel or computer with verification automation functions

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. One workplace with a diameter of 110 mm with five steel O-rings, a tripod and a foot with a clip. Stamped steel bath with a volume of 3.5 liters and a depth of 110 mm. Bath volume 3.5 l Overall dimensions 405x345x660 mm The open part of the bath is 235x130 mm Bath depth 110 mm Weight 6 kg Power consumption 2.5 kW

Electric vacuum drying cabinet SNVS-3.3,5/3-I2P is designed for drying and heating various materials in air and in vacuum at temperatures up to 300 ° C.

A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials). As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line. Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. "Probe" mode for tracing NON-METALLIC communications using an in-line generator (optional). Compact stand-alone generator with an output power of up to 20 watts and a range of up to 3 km. Connection to the desired route is possible both by contact and contactless method.

The electric vacuum drying cabinet SNVS-150/0-I2 is designed for degassing and setting the selected program (20 programs / up to 20 steps) of the vacuum depth with automatic maintenance of the set value.