Catalog
Back to search results
The verification complex ZM3003
Back to search results
The verification complex ZM3003
It has:
a wide range of calibrated currents and voltages reproduction;
wide frequency range at alternating current 20Hz – 20kHz;
adjustment of the phase shift angle between current and voltage in the range 0 – 360 °;
high accuracy of reproduction of current, voltage, phase shift angle.
Normal operating conditions:
ambient temperature (23 ± 5) ° C;
the relative humidity of the surrounding air is 30-80 %;
atmospheric pressure 84 — 106 kPa (630-795 mmHg);
supply network voltage (220 ± 4.4) V;
supply network frequency 48 — 62 Hz.
Operating conditions:
ambient temperature from 5 to 40 ° C;
relative humidity up to 80 % at temperatures up to 30 ° C;
atmospheric pressure 84 — 106 kPa (630 — 795 mmHg)
supply voltage (220 ± 22) At a frequency of 48 — 62 Hz;
The additional error in reproducing the voltage and strength of direct and alternating current, as well as the power from a change in the mains voltage by ± 10% of the nominal value of 220 V does not exceed half of the corresponding basic error.
The additional error from the change in ambient temperature for every 10 ° C does not exceed half of the basic error.
The electrical insulation resistance between the power supply circuits of the device and the housing is not less than:
under normal conditions of use – 20 Mohm;
at elevated ambient temperature — 5 Mom.
The device can be used as part of automated measuring systems for various purposes with serial interfaces: RS-232C (EIA-2320) or USB.
Overall dimensions:
control unit 270 x448.8x496 mm,
power unit 270 x448.8x496 mm.
Weight: control unit 25 kg, amplifier unit 25 kg.
a wide range of calibrated currents and voltages reproduction;
wide frequency range at alternating current 20Hz – 20kHz;
adjustment of the phase shift angle between current and voltage in the range 0 – 360 °;
high accuracy of reproduction of current, voltage, phase shift angle.
Normal operating conditions:
ambient temperature (23 ± 5) ° C;
the relative humidity of the surrounding air is 30-80 %;
atmospheric pressure 84 — 106 kPa (630-795 mmHg);
supply network voltage (220 ± 4.4) V;
supply network frequency 48 — 62 Hz.
Operating conditions:
ambient temperature from 5 to 40 ° C;
relative humidity up to 80 % at temperatures up to 30 ° C;
atmospheric pressure 84 — 106 kPa (630 — 795 mmHg)
supply voltage (220 ± 22) At a frequency of 48 — 62 Hz;
The additional error in reproducing the voltage and strength of direct and alternating current, as well as the power from a change in the mains voltage by ± 10% of the nominal value of 220 V does not exceed half of the corresponding basic error.
The additional error from the change in ambient temperature for every 10 ° C does not exceed half of the basic error.
The electrical insulation resistance between the power supply circuits of the device and the housing is not less than:
under normal conditions of use – 20 Mohm;
at elevated ambient temperature — 5 Mom.
The device can be used as part of automated measuring systems for various purposes with serial interfaces: RS-232C (EIA-2320) or USB.
Overall dimensions:
control unit 270 x448.8x496 mm,
power unit 270 x448.8x496 mm.
Weight: control unit 25 kg, amplifier unit 25 kg.
DOSIMETER‑RADIOMETER MKS‑AT1117M (WITH DETECTION UNIT BDPS‑02)
General monitoring of contamination of various objects with radioactive substances in the counting rate mode, with the possibility of separate measurement of the alpha particle flux density and beta particle flux density, as well as the gamma radiation dose rate
A wide range of measurements
The possibility of using an extension rod
Atomtekh
Minsk
Produced in: Belarus, Minsk
Thermal converters with a unified output signal analog explosion-proof IT-1-Ex
1 supp.
NPP AVTOMATIKA
Vladimir
Produced in: Vladimir
DOSIMETER‑RADIOMETER ISS‑AT1117M (ALPHA/BETA POLLUTION MONITORS)
High sensitivity
Sound, light and visual alarm of exceeding the set threshold levels
The possibility of using both stationary and wearable versions
A wide range of measurements
Atomtekh
Minsk
Produced in: Belarus, Minsk
IMK-30 Torsion testing machine
Technical specifications:
Maximum load (torque): 30 N·m
Maximum twisting angle: 50000°
The discreteness of the twisting angle: 0.01°
Twisting angle error: ±0.1°
Torque discreteness: 0.001 N·m
Relative error of torque measurement: no more than 1% in the measurement range from 0.6 to 30 Nm
Torque measurement error: no more than 0.01 N·m in the measurement range from 0 to 0.6 N · m
Maximum rotation speed: 10 rpm
Weight: 150 kg
Overall dimensions (length x width x height): 1000 x 500 x 500 mm
Diameter of the universal testing device: 80 mm
Maximum spring length: 300 mm or more
Tochpribor-KB
Ivanovo
Produced in: Ivanovo
Pressure gauge MTIf-160
Pressure gauge with a range of measured pressure 0...160 kPa.
Accuracy class 0.4
Connection size M20x1.5 mm
Overall dimensions 160 mm
Weight 1.5 kg
Termeks
Tomsk
Produced in: Tomsk
DMER-30-0,5 medical electronic manual dynamometer
from
7 600 ₽
TVES
Tulinovka
Produced in: Tambov Region, Tulinovka
Continuous measurement of temperature in the industrial area
Appointment: the continuous measurement system allows for continuous measurement of the heating temperature of the industrial bucket, to improve the stability and reliability of measuring the temperature of liquid metal. Due to the fixed measurement position, the system eliminates errors due to the human factor. This method of measuring temperature was researched and invented on the theory of an absolutely black body. The principle of the temperature measurement system is the immersion of a temperature probe into molten steel to determine the temperature. The temperature probe made of an absolutely black body is designed in a special way to receive an infrared radiation signal corresponding to the temperature of molten steel.
Scope of application: Intermediate bucket
Measuring range:
Warming up the promkovsh: from 800°C to 1400°C; Molten steel: from 1400°C to 1600°C
Accuracy: Preheating of the promkovsh 7 ° C; Molten steel: 3 ° C
Response time: Hot response time 75 sec;
Cold response time 4 min
Measuring probe length: 964mm, 1100mm
Durability of measuring probes: 12 hours, 24 hours, 48 hours
Number of thermal shocks: up to 5 times
EVRAZPRIBOR
Lipetsk
Produced in: Lipetsk
Smart probe of relative humidity and temperature L=500 mm SSVL.500P with built-in flash memory
from
14 400 ₽
The smart probe of relative humidity and temperature L=500 mm with a built-in flash memory is designed to measure the temperature of gaseous materials without mechanical impurities and aggressive vapors, relative humidity by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the installed ThermoMonitor based on the Android program.
Operating conditions of the SZVL.500P smart probe
Ambient temperature, °C: -20...+55.
Relative humidity, %: not more than 80 at T=35 °C.
Atmospheric pressure, kPa: 86...106.
Functionality of the smart probe SSVL.500P
Measurement of physical quantities with a resolution of 0.01.
Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory).
Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitorbased on the Android program.
Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor based on the Android program.
Automatic transition to sleep mode after 50 seconds.
The ability to connect an external power supply.
Possibility of calibration.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Thermoanemometer-hygrometer-barometer EcoTerma Maxima 01
from
52 900 ₽
Eco-E
Москва
Produced in: Moscow