Furniture

The NV-800 OH is the most compact island table with plumbing in the NV line. It can be placed in the center of the laboratory and organize two workplaces. The table top is 152 cm deep. A lamp and two sockets are built into the superstructure on each side. It is designed for standing work: the height of the table top is 85 cm. External dimensions of the table (W×D×H): 760×1520×1650 mm. Work surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-800 OLH: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-800 OKH: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-800 OSPH: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures, heating devices should not be placed on the surface. NV-800 OPH: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 30 cm, and its height is 80 cm. This table has plumbing fixtures: a faucet and a small sink-drain made of polypropylene resistant to aggressive chemicals built into the countertop. Its diameter is 135 mm and its depth is 110 mm. The working area on each side is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. The sockets (with two on each side, there are four of them in total) have the IP20 degree of protection, maximum load: 1.5 kW. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

The NV-1000 MOP is a large table with a deep sink made of polypropylene and with a built—in dryer for 18 seats. It is designed for standing work: its height is 85 cm. Assembled dimensions (W×D×H): 1000×600×1650 mm. The table top is made of laminated chipboard. It has a built-in Stegler WJH0357F polypropylene sink, its internal dimensions (W×L×H): 490×390×290 mm. The polypropylene is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents and suits perfectly for washing laboratory dishes. The package includes a stainless steel mixer with flexible 300 mm tap connectors and a siphon. The upper part of the inclined shelves of the dryer, on which dishes are placed, is covered with a polypropylene insert to protect it against water and reagents. The 18 pins are also made of polypropylene. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-1000 MOP tables A wide table with a polypropylene sink and dryer for 18 dishes. An inexpensive solution for laboratories that value the reliability and durability of furniture. The polypropylene is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Application of NV-1000 MOP tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

1. LK-400 SHP Width-400 Chipboard-14 250 ₽ Steel-27 630 ₽ 2. LK-600 SHP Width-600 Chipboard-18 080 ₽ Steel-36 890 ₽ 3.LK-800 SHP Width-800 Chipboard-20 110 ₽ Steel-42 650 ₽

The complete set is made of polypropylene there are no components sensitive to the action of corrosive substances. Inside the storage area there are 3 compartments. In each compartment there is 1 easily removable polypropylene shelf with the possibility of installation at 3 levels in height the permissible load on the shelf is 30 kg 3 hinged facades made of polypropylene hinges outside the storage area (pin system) polyamide lock in each door handles made of polypropylene cabinet has a double back wall. Extraction of reagent vapors is carried out from all storage areas flange ∅ 100 mm on the back wall for connection to the exhaust ventilation hidden adjustable supports (0-40 mm). The adjustment of the supports is carried out from inside the pedestal through the base

The case is metal, powder–painted (RAL 7035) with the texture of shagreen leather , double metal facades with a noise suppressor, opening angle 270° handles – polypropylene adjustable supports cabinet with 2 doors and 2 drawers LAB-PRO VOLUME 2: upper compartment with 2 drawers: telescopic guides of full extension the internal size of the drawer: a pedestal with a length of 1160 mm – 500*410* 85mm permissible load on the box – 30kg

Suspended frame cabinet with a width of 770 mm with sheet steel panels for fume hoods of the SHV 100 series. It consists of two compartments with one shelf in each. Overall dimensions 770x590x720 mm

Metal single support cabinet with door and top drawer Length, mm: 540 Depth, mm: 500 Height, mm: 860 Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather Frameless housing design Two compartments. The upper compartment with a drawer, the lower one with a hinged door. The side walls and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm The facades are filled with noise-absorbing material The door is equipped with a lock Hinges with an opening angle of 270o Handles – polypropylene Easy-to-remove shelf in the lower compartment with the possibility of installation at 3 different height levels. The shelf has a lock. The permissible load on the shelf is 30 kg. Telescopic guides of full extension

Furniture for laboratory work. All-metal exhaust cabinet Working surface: FRIDURIT (20 mm) Overall dimensions: Length, mm: 1200 Depth, mm: 740 Height, mm: 2100 equipment Working box front anti–spill side - acid–resistant polished stainless steel AISI 316 housing - metal painted with white powder paint (RAL 9016) guide posts – aluminum profile painted with dark gray powder paint (RAL 7011) 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.

Furniture for laboratory work. All-metal exhaust cabinet Working surface: VITE 16mm Overall dimensions: Length, mm: 1200 Depth, mm: 740 Height, mm: 2100 equipment Working box front anti–spill side - acid–resistant polished stainless steel AISI 316 housing - metal painted with white powder paint (RAL 9016) guide posts – aluminum profile painted with dark gray powder paint (RAL 7011) 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.

Furniture for laboratory work. All-metal exhaust cabinet Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound Overall dimensions: Length, mm: 900 Depth, mm: 740 Height, mm: 2100 equipment Working box front anti–spill side - acid–resistant polished stainless steel AISI 316 housing - metal painted with white powder paint (RAL 9016) guide posts – aluminum profile painted with dark gray powder paint (RAL 7011) 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)