Search

Furniture for laboratory work. Mounted storage cabinet Length, mm: 800 Depth, mm: 350 Height, mm: 700 PACKAGE CONTENTS housing – white melamine with a thickness of 16 mm, ABS edge dark gray two compartments facades – white melamine with ABS edge dark gray in the right compartment 1 built-in shelf, in the left compartment 1 easily removable shelf with the possibility of rearrangement at 5 levels in height permissible load on the shelf - 20 kg.

The B5-83 DC power supply is designed to provide constant voltage and current to devices and equipment during the development, production, operation and repair of electronic devices. - Allows harsh operating conditions - Wide range of currents and voltages at a maximum power of 200 watts Technical specifications Output voltage setting range from 3 to 300 V Output current setting range from 0.05 to 2 A Electrical output power, not more than 200 watts The main error of the output voltage setting is ± 2 V The main error of setting the output current is ± 0.02 A Additional error in setting the output voltage caused by a deviation of the mains voltage from the nominal value by ± 10% ± (0.0001 · Uust + 3 mV) Additional error in setting the output voltage caused by a change in the load current from 0.9 of the maximum value to zero ± (0.0002 · Uust + 10 mV) Additional error in setting the output current caused by a deviation of the mains voltage from the nominal value by ± 10% ± (0.0002 · Iust + 1 mA) Additional error in setting the output current caused by a change in the load voltage from 0.9 of the maximum value to zero ± (0.0005 · Iust + 2 mA) The change in the output voltage in the voltage stabilization mode with a deviation of the ambient temperature in the operating temperature range by ± 10 ° C, not more than ± 250 mV Change of the output current in the current stabilization mode with a deviation of the ambient temperature in the operating temperature range by ± 10 ° C, not more than ± 10 mA Operating temperature range from minus 10 to 50 °C AC power supply 220 V, 50 Hz Power consumption, no more than 350 VA Overall dimensions, mm 240x128x313 Weight, not more than 5.5 kg

It is indispensable when used by the services of Rospotrebnadzor and labor protection to control the parameters of the microclimate, certification of workplaces at industrial enterprises, offices and public institutions.

It is designed for standing work. It can be equipped with various superstructures, sliding and hanging bollards. Overall dimensions 900x1280x900 mm

Permissible distributed load on the table up to 180kg 1.LK-1500 SLT (case - chipboard) CERAMICS - 49 090 ₽ GRANTEC- 61 810 ₽ LAB HPL- 64 400 ₽ 2. LK-1500 SLT (case - steel) CERAMICS - 62 390 ₽ GRANTEC - 75 110 ₽ LAB HPL- 77 700 ₽

Purpose and functions: · Receiving and transmitting the exact time to one or more subscribers · Synchronization of equipment operation at the exact time · Synchronization of subscribers by time within both one and several objects, i.e. creation of a hierarchy of subscriber systems tied to a single astronomical time at sufficiently large distances · Retransmission of accurate time signals to the shielded premises of objects (basements, mines, etc.) The PARMA RV9.01 system consists of a GPS receiver and a set (from 1 to 4) repeaters.

A set of an autonomous generator MAG-05.2.XX is used for tracing and determining the depth of non-metallic pipelines, storm channels at a depth of up to 5 meters in conjunction with tracerouting receivers having a "Probe" function with an operating frequency of 512 Hz. The principle of tracing non-metallic pipelines with an autonomous MAG-05 generator.2.XX A small-sized autonomous generator MAG-05 is placed on a problematic section of the highway using a cable pushing device. The generator emits an electromagnetic field. When the receiver is moved on the earth's surface (when the receiver axis is perpendicular to the communication axis), a signal with pronounced two local minima, a general maximum and two false peaks is induced along the communication axis in the receiving coil. When moving the receiver across the axis of the generator, there are no local minima and false peaks of the signal.

The permissible distributed load on the table is up to 250 kg. 1. LK-900 SP Width – 900 CPL- 30 420 ₽ CERAMICS- 31,770 ₽ GRANTEC- 38 760 ₽ STAINLESS STEEL. STEEL- 41 060 ₽ LAB HPL- 39 800 ₽ 2. LK-1200 SP Width – 1200 CPL- 36 340 ₽ CERAMICS- 38 500 ₽ GRANTEC- 47 350 ₽ STAINLESS STEEL. STEEL- 50 280 ₽ LAB HPL-49 570 ₽ 3. LK-1500 SP Width – 1500 CPL- 42 280 ₽ CERAMICS- 44,660 ₽ GRANTEC- 56 220 ₽ STAINLESS STEEL. STEEL- 59,690 ₽ LAB HPL-58 580 ₽ 4. LK-1800 SP Width – 1800 CPL- 48 250 ₽ CERAMICS- 50 170 ₽ GRANTEC- 64 710 ₽ STAINLESS STEEL. STEEL- 68 550 ₽ LAB HPL-67 020 ₽

An exhaust cabinet for heating furnaces. The chamber of the laboratory fume cupboard is sheathed with ceramic granite (30x30 cm) from the inside. The base of the cabinet has an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged along the facade with a durable 2-mm PVC edge, which increases their impact resistance and mechanical strength. Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, during sample analysis and many others. The countertop of the exhaust laboratory cabinet is made of ceramic granite as standard. Porcelain stoneware (tile) has a number of advantages: it is resistant to prolonged exposure to acids, alkalis and organic solvents, it has higher mechanical resistance, it withstands high temperatures, it has limited resistance to hydrofluoric acid. Many possible variants of table tops resistant to aggressive materials make the fume cupboard indispensable for any laboratory. The complete set of the fume hood includes: a working chamber: a lifting screen with counterweights, a granite table top; an exhaust pipe on the cabinet lid with a diameter of 150 mm; grounded and not grounded electrical outlets (2 items); a powder-coated metal frame (25x25 mm); legs height-adjustable within 15 mm.

A table with an overall height of 900 mm with a countertop measuring 900 × 640 mm made of porcelain stoneware, monolithic ceramics or stainless steel. It is designed for long-term operation, the power frame does not contain aluminum and plastic parts in the fasteners. Overall dimensions without superstructure 900x640x900 mm

Island table Combined working surface: main table top STEEL (n/w steel with a side) 650 mm deep / auxiliary table top made of TRESPA material 200 mm deep / main table top STEEL (n/w steel with a side) 650 mm deep Length, mm: 1200 Depth, mm: 1500 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Four easily removable screens (RAL 7035) and two non-removable (RAL 5023) Hidden fasteners Adjustable supports (0-40 mm) A set of end boxes-plugs