Search

Furniture for laboratory work. Table-sink LAB-M MO 75.60.90 PP Width, mm: 750 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of polypropylene. Attention! It is not recommended to use the inner size of the bowl for work with oil and petroleum products (fuel oil, bitumen, etc.) – 500*400*290 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

The potassium salt of ethylenediaminetetraacetic acid (EDTA) is the preferred anticoagulant for hematological studies. Material for research............... EDTA-blood, plasma Scope of application............................ hematological examination of whole blood

The thermoelectric converter THA.GPKSH.011 is designed to measure the temperature of gaseous and liquid chemical environments that do not destroy protective fittings, as well as the surfaces of solids.

Measurement of the activity of hydrogen ions (pH, pH25), ORP, EMF and temperature of aqueous media. Operational control of parameters of water-chemical regimes at thermal and nuclear power facilities, in accordance with CO 153-34.37.303. Convenience and accuracy of measurements | Automatic temperature compensation. Automatic recognition of buffer solutions. Four measurement modes | pH, pH25, EMF/ORP, temperature. pH measurement in flow and immersion modes | The flow-filling MPN 901/903 module is included. High contrast LCD indicator | Low power consumption | Up to 2000 hours of continuous operation from a set of AA elements.

Oil quenching tanks of the tank type are designed for quenching cooling of products heated to the quenching temperature in oil at temperatures up to 90 ° C in stationary conditions. The workspace environment is oil. Quenching oil tanks "BZM-10.12.15/0.6" are designed to remove the steam jacket from the surface of the part in oil with mixing in a laminated flow with maintaining the temperature of the liquid. Water, oil, or polymer liquid can be used as a working fluid in the quenching oil tanks "BZM-10.12.15/0.6". The tank is welded from a metal profile and is a rigid power structure. U–shaped heating elements with a capacity of up to 40 kW are installed on the inner side. Cooling is carried out by means of a heat exchanger (coil) installed in the working space. Cold process water from the mains is used for cooling. Optionally, tanks (or a complex of tanks) can be equipped with a chiller or a cooling tower. The liquid level maintenance system ensures a constant level of liquid in the tank. A level sensor is installed to monitor the level. When the liquid level in the tank decreases, the liquid is refilled automatically. Mixing of the liquid in the tank is provided by means of a stirrer located at the bottom.

It is designed for heating samples in chemical beakers, flasks or evaporation cups. It can be used for the determination of extracting substances in high-pressure polyethylene in accordance with GOST 26393. It can be used as a universal thermostat and used to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. The operating temperature range is +20...+100 °C. Feed pump for external closed-type thermostating systems. Bath volume 18 l Overall dimensions 585x415x825 mm The open part of the bath is 360x260 mm Bath depth 150 mm Weight 23 kg Power consumption 2.2 kW.

NV-1200 OH are relatively small island tables with a superstructure. Such a table can be placed in the center of the laboratory and workplaces can be organized on its two sides. The table top depth: 152 cm. The table is designed for standing work: the height of the table top is 85 cm. A lamp and two sockets are built into the superstructure on each side. External dimensions of the table (W×D×H): 1218×1520×1650 mm. Work surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-1200 OLH: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-1200 OKH: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1200 OSPH: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. NV-1200 OPH: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 30 cm, and its height is 80 cm. This table has plumbing fixtures: a faucet and a small sink-drain made of polypropylene resistant to aggressive chemicals built into the countertop. Its diameter is 135 mm and its depth is 110 mm. The working area on each side is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. The sockets (with two on each side, there are four of them in total) have the IP20 degree of protection, maximum load: 1.5 kW. A cabinet with three pull-out drawers is built into the table on each side. You can store there laboratory utensils or small stuff you need at hand. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

Furniture for laboratory work. Mounted storage cabinet Length, mm: 800 Depth, mm: 350 Height, mm: 700 PACKAGE CONTENTS housing – white melamine with a thickness of 16 mm, ABS edge dark gray two compartments facades – white melamine with ABS edge dark gray in the right compartment 1 built-in shelf, in the left compartment 1 easily removable shelf with the possibility of rearrangement at 5 levels in height permissible load on the shelf - 20 kg.

The B5-83 DC power supply is designed to provide constant voltage and current to devices and equipment during the development, production, operation and repair of electronic devices. - Allows harsh operating conditions - Wide range of currents and voltages at a maximum power of 200 watts Technical specifications Output voltage setting range from 3 to 300 V Output current setting range from 0.05 to 2 A Electrical output power, not more than 200 watts The main error of the output voltage setting is ± 2 V The main error of setting the output current is ± 0.02 A Additional error in setting the output voltage caused by a deviation of the mains voltage from the nominal value by ± 10% ± (0.0001 · Uust + 3 mV) Additional error in setting the output voltage caused by a change in the load current from 0.9 of the maximum value to zero ± (0.0002 · Uust + 10 mV) Additional error in setting the output current caused by a deviation of the mains voltage from the nominal value by ± 10% ± (0.0002 · Iust + 1 mA) Additional error in setting the output current caused by a change in the load voltage from 0.9 of the maximum value to zero ± (0.0005 · Iust + 2 mA) The change in the output voltage in the voltage stabilization mode with a deviation of the ambient temperature in the operating temperature range by ± 10 ° C, not more than ± 250 mV Change of the output current in the current stabilization mode with a deviation of the ambient temperature in the operating temperature range by ± 10 ° C, not more than ± 10 mA Operating temperature range from minus 10 to 50 °C AC power supply 220 V, 50 Hz Power consumption, no more than 350 VA Overall dimensions, mm 240x128x313 Weight, not more than 5.5 kg

It is indispensable when used by the services of Rospotrebnadzor and labor protection to control the parameters of the microclimate, certification of workplaces at industrial enterprises, offices and public institutions.

It is designed for standing work. It can be equipped with various superstructures, sliding and hanging bollards. Overall dimensions 900x1280x900 mm