Search

Bunsen flask 2-1000-29/32 with Primelab tube is made of chemically resistant laboratory glass. It has a flat, stable bottom with a side tube, on which olives are provided for a strong connection with the equipment. To get started, you need to insert a filter funnel into the neck and put a soft vacuum pump hose on the tube. Characteristics: • Volume – 1000 ml • Section size – 29/32 • Base diameter – 131 mm • Height 210 mm.

The combined laboratory up to 35 kV (ETL-35K) consists of: 1. Test facility • – Maximum rectified voltage up to 70 kV; • – Maximum AC voltage of the industrial frequency of 50 Hz to 100 kV. 2. Insulation parameters meter • – Transformation coefficient; • – No-load losses at low voltage; • – Short circuit resistance; • – Voltage and current; • – Power factor; • – Frequency of the measured voltage (current); • – Phase shift angle between voltage and current; • – Measurement of the active resistance of the windings. 3. Burning facility • – Maximum voltage up to 30 kV; • – Maximum current up to 80 A; • – Working hours are not limited; • – Switching of stages is carried out without breaking the arc at the time of switching; • – The ability to start working from any stage of burning (when working with low-voltage cables); • – Built-in afterburning. 4. High voltage pulse generator • – Output voltage 0...12 kV / 0...24 kV; • – The pulse energy at each stage is 3000 J; • – Built-in IDM for collaboration with the reflectometer. 5. Reflectometer – Supports 3 methods of determining the location of damage: • – By pulse reflectometry; • – By the method of oscillatory discharge; • – Pulse-arc method. 6. High-voltage cable defects detector • – Determining the location and depth of the cable at a depth of up to 10 m; • – Tracing at a distance of up to 10 km; • – Search for live electrical cables; • – Search for places where pipelines and cables intersect; • – Determining the places of damage to cable lines; • – Site surveys before excavation; • – Search for places of damage to the external insulation of the cable; • – GPS\GLONASS coordinates recording and mapping of found communications; • – Cable selection from the bundle; • – Search for the place of damage by acoustic method.

It is intended for: – determination by the correlation method of the location of liquid leakages from pipelines of household and drinking water supply, hot water supply, heating and other pipeline systems, provided that the transported medium in the pipeline is under pressure; – tracing underground utilities with the display of the communication axis and digital measurement of the depth of occurrence; – built-in GPS/GLONASS module for saving coordinates with subsequent mapping of the communication route on the map; – clarification of leakage sites by an acoustic leak detector. – diagnostics of shut-off valves; – creation of an information database on the condition of pipelines and the results of pipeline diagnostics.

Conical flask KN-1-500-29/32 with divisions complies with GOST 25336-82. Made of transparent borosilicate glass, which allows you to observe all the processes inside. A capacity scale is applied to its wall, allowing you to determine the volume of contents in a matter of seconds. A ground joint (29/32) is provided on the neck, with which the equipment can be securely attached to the flask. The volume is 500 ml with a height of 165 mm. The diameter of the base is 105 mm.

Model features: Automatic anchor pickup Large color display Timer 990 min Display: - set and actual temperature; - weight values; - timer; - current time and date.

The TM-75 top–drive agitator is an innovative development of the Russian company Primlab, which specializes in the creation and manufacture of laboratory equipment. It is designed for mixing liquids of different volumes and viscosities with the ability to set the rotation speed of the nozzle. In terms of its functionality and technical characteristics, it surpasses most of the similar equipment. Despite its compact dimensions, the agitator has many advantages. The main ones are: Mixing of samples with a viscosity of up to 50,000 MPa*s; Mixing of samples with a volume of up to 40 liters (water); Maximum torque, Ncm - 90; Several modes of operation: mixing clockwise and counterclockwise (reverse); Powerful brushless motor (75W); Large range of shaft rotation speed – from 20 to 2200 rpm. It is permissible to change the rotation speed without stopping the agitator; A seven-segment indicator that displays information about errors