Search

The magnetic particle testing stand has a simple switch between circular and longitudinal magnetization modes, as well as easy movement and fixation of the solenoid and electrical contact for locating the test object in the working area of ​​the stand. Clamping of the controlled part during circular magnetization occurs in one movement. The stand can be installed on a stationary or mobile magnetic particle testing station. For ease of inspection after magnetization, a tray with a removable protective grid is provided. The protective rear wall protects against the spread of spray splashes outside the working area.

Technical characteristics of PipeScope 60-170 Pipe inspection time in the installation is no more than 30 seconds The diameter range of controlled pipes is 60 mm – 170 mm The range of wall thicknesses of controlled pipes is up to 20 mm The length of the controlled pipes is 1..13 m The maximum time of continuous operation per day is up to 24 hours Rated power supply voltage is 50 Hz, 220 V The working gap between the sensor and the control object is up to 0.5 mm Operating temperature range is -40 °C... +40 °C The number of measuring channels for searching for defects using the magnetic flux scattering method is up to 128* The number of measuring channels for defect detection and thickness measurement using the flow density measurement method is up to 96* Pipe diameter measurement error 0.05% The measurement error of the length of the controlled pipe is 10 cm The possibility of demagnetization of the pipe after control in automatic and manual modes is availiable The coverage of the continuity of control along the perimeter of the pipe is 100% The changeover time of the installation to another BT standard size is no more than 30 minutes. The speed of movement of the flaw detector trolley through the pipe is from 0 to 0.9 m/s Power consumption is up to 1 kW Installation weight  Trolley with basket — no more than 11 kg Magnetization coil — no more than 10 kg Air lift — no more than 72 kg Minimum size of detectable defects In accordance with DS-1 Minimum signal-to-noise ratio for drilling with a diameter of 1.6 mm In accordance with DS-1 The error in determining the linear coordinate of the defect is not more than 5 cm The error in determining the angular coordinate of the defect is no more than 4 degrees ° Installation control complies with the following standards in terms of its characteristics: API Spec 5D, API RP7G, DS- 1 Overall size and weight of PipeScope 60 — 170 Ultra Pro in transport containers without SOP and without pneumatic lifts 600 mm X 600 mm X 600 mm / 32 kg Overall size and weight of the air lift in a transport container is 1300 mm X 300 mm X 300 mm / 72 kg Overall size and weight of the SOP in a transport container is 1900 mm X 210 mm X 210 mm / 60 kg

The Europolitest company continues to release its "bestseller" cultivator KVM-05. This cultivator was developed and produced jointly with the Candidate of Biological Sciences prof. Grigoriev and LLC "Omikron", LLC "SFU-System" Krasnoyarsk. Since 2021, due to the reorganization of the production chain, the production of cultivators of the KVM series has been established by Europolitest LLC in the mode of a full production cycle. The thermophilic strain of chlorella algae has been widely used in ecocontrol laboratories, biotests with this test object are by far the most automated biotests that allow reducing time at all stages of work (building up the uterine culture, sample exposure in the biotest, registration of the test function). Cultivator KVM-05 is a long-lived among cultivators of this purpose and a standard of reliability, reproducibility and durability. Used in techniques: - Methodology for determining the toxicity index of nanopowders, products made of nanomaterials, nanopoints, waste and sewage sludge containing nanoparticles by changing the optical density of the Chlorella algae test culture (Chlorella vulgaris Beijer). FR.1.39.2010.09103; MVI 1/25-2010. - Methodology for determining the toxicity of samples of surface fresh, groundwater, drinking water, wastewater, water extracts from soil, sewage sludge and waste by changing the optical density of the chlorella algae culture (Chlorella vulgaris Beijer). MON F T 14.1:2:3:4.10-04 / 16.1:2.3:3.7-04 FR.1.31.2009.06642. - Methodology for determining the toxicity of drinking, natural and wastewater, water extracts from soils, sewage sludge and waste by changing the relative index of delayed fluorescence (OPF) cultures of chlorella algae (Chlorella vulgaris Beijer) HDPE F 14.1:2:4.16-09 / 16.1:2.3.3.14-09.

The principle of operation of the device UER-03: The principle of operation of the device is based on the creation of equal conditions for all exposed samples during biotesting. It is achieved by rotating the cassette with the test culture samples of crustaceans installed in it around the central axis. Since the sample cassette is oriented obliquely, when it rotates, there is an active gas exchange between the surrounding air and water samples. As the result, test organisms in test tubes are provided with sufficient oxygen concentration in the medium during the entire exposure period. The rotation speed of the cassette is chosen so as not to have a stress effect on the crustaceans. The device operates in continuous mode and does not require additional intervention in the process of exposing the crustacean culture. The required conditions for temperature and light irradiation can be provided only when the device is installed in the climatostat. Used in techniques: - Methodology for determining the toxicity of water extracts from soils, sewage sludge and waste, drinking, sewage and natural water by the mortality of the test object (Daphnia magna Straus). MON F 14.1:2:4.12-06 / 16.1:2.3.3.9-06 FR.1.31.2009.06641. - Methodology for determining the toxicity index of nanopowders, products made of nanomaterials, nanopoints, waste and sewage sludge containing nanoparticles, according to the mortality of the test organism Daphnia magna Straus. FR.1.39.2010.09102 And it can also be used in other suitable techniques.

This cultivator is an improved model of cultivators of the KVM type of earlier execution. Previously, KVM cultivators had a narrowly focused orientation to the Grigoriev Yu.S. methodology. 14.1:2:3:4.10-04 / 16.1:2:2.3:3.7-04; FR.1.31.2009.06642 (biotest on the reaction of a thermophilic strain of chlorella algae, test function - cell growth in relation to control. the duration of the test is 22 hours, toxicity criteria: 20% suppression of growth. 30% - stimulation of growth in relation to control). The Europolitest company strives to provide Russian laboratories with the best equipment with extensive functionality. Today. we have released a new cultivator KVM-08 with touch control. It can still be used according to the above method (in the same mode - power from the 220V household network via the power supply) At the same time, this cultivator can be connected to the on-board network of climatostats (P2, B3 and B4). In this case, it can maintain the temperature control at the level of 20 gr. With (despite the fact that the climatostat will be configured to maintain 18 gr. S). That is, when connecting this cultivator with the on-board network of the climatostat, the cultivator allows you to work in a wider temperature range (20 - 32 gr. S) And when working from 220V - in the range (27 - 40 gr. S.) In such a way thus, this cultivator allows you to consistently carry out two techniques: 1). 14.1:2:3:4.10-04 / 16.1:2:2.3:3.7-04; FR.1.31.2009.06642 (when operating from 220 V without using a climatostat) 2). RD 52.24.905-2020 (when the cultivator is connected to the on-board network of climatostats (P2, B3 and B4) In addition, with new characteristics and functionality, this cultivator is a convenient research tool. In addition to the preset modes for biotests according to the two above methods, the cultivator has 3 three user modes for free programming by the operator Allows you to configure and "flash" individual parameters: - temperature control : any value from the range of 20 - 40 gr. C (take into account the restrictions for work from 220 or from the board. climatostat networks) - lumostating : the maximum value is 16,000 Lux, the cultivator allows you to adjust from 0 to 100 % - rotation speed of the drum with penicillin vials (24 pcs.) : 0 - 60 rpm - duration of exposure: 0 - 240 h (discreteness of 1 min) - sound notification of the end of the specified exposure time

Climatostat V3 (TU 26.51.-70-002-63790925-2021)- it has a new unique control unit UB-04T with a touch screen. This climatostat is universal, it combines the advantages of climatostats B2 and P2, and, accordingly, can perform the functions of one and the other. It is intended for performing works on biotesting the toxicity of aquatic environments on daphnia and ceriodaphnia crustaceans, as well as microalgae (scenedesmus, etc.) in controlled environmental conditions. In the climatostat, it is possible to install exposure devices of the type (UER or similar) and to carry out the exposure of samples under conditions of rotation of samples with test organisms in a plane located at an angle to the horizontal. This ensures the intensification of gas exchange of liquid samples with the external environment. A slow rotation ensures complete uniformity of conditions (temperature, lighting, gas exchange) in all samples, including control, and as a result - high reproducibility of the biotest conditions and reproducibility of the test results. The climatostat has an on-board network for connecting additional sample exposure devices, 5 (five) preset modes and 8 (eight) user modes for free programming of the climatostating parameters by the operator. It is intended for carrying out biotesting (according to the methods of Zhmur N.S., "Aquaross" 2001, 2007), Grigorieva Y.S. (SFU)., Terekhova V.A. (MSU, LATAP), hazard assessment of nanomaterials according to the methods of Morgalev Yu.N. (TomSU) and others. Used with test objects: Crustaceans Daphnia Magna (Daphnia magna Straus); Crustaceans Ceriodaphnia affinis (Ceriodaphnia affinis); Crustaceans of salty reservoirs Artemia Salina (Artemia salina L); Algae Scenedesmus (Scenedesmus quadricauda). Algae chlorella (Chlorella vulgaris Beijer), etc. Additional features of the controller (UB-04T): - setting the contrast of information display - sound notification of an open door - audio notification of the end of the biotest - graphical intuitive parameter setting scales - Fully Russian-language menu and Russian-language design of all text information of the interface - 3 (three) preset modes with the exact name and a brief description of the techniques (can be increased or decreased at the request of the Customer) - quick correction of backlight brightness in preset modes (two touches) - fast temperature correction of temperature control in preset modes (two touches) - 8 user modes (the number of modes can be increased or decreased at the request of the customer when ordering) - graphical intuitive scales for adjusting the brightness of lumostating, temperature of thermostating, automatic adjustment of the photoperiod (with one touch) - built-in countdown timers for setting the exposure time in the biotest (up to 180 days with a minimum discreteness of 1 min) - notification of the power failure of the device during the test - error notification - the ability to update the controller firmware directly by the user at the place of operation - quick reset to factory presets

The PA-1 single-channel portable aspirator is based on the PC-1 portable compressor. It provides air aspiration with a flow rate from 0.1 to 0.8 l/min. The aspirator is powered by an integral battery.