Search

Designed for: provision of multichannel synchronous measurements (together with primary transducers) of vibroacoustic characteristics and characteristics of the external hydroacoustic field of marine objects using spectral correlation (including mutual) analysis. providing the possibility of connecting measuring transducers of various physical quantities with various types of pre-amplifiers, including current, voltage, charge amplifier, converters with integrated ICP type electronics (IEPE, Delta Tron).

The mobile spectrometric installation MKG-01D is designed to measure the energy spectrum of gamma radiation and is used to determine the isotopic composition and specific activity of gamma-emitting radionuclides of radioactive waste (RW) in light-duty containers of various shapes and geometries (metal barrels, plastic containers), in non-returnable protective reinforced concrete containers of the NPC type, as well as to determine activity of extended objects. Purpose: implementation of a fully automated system designed to measure, process and present spectrometric information about the sources of controlled gamma radiation

during the control of maximum permissible concentrations in atmospheric air, in the air of the working area, during technological control of air purity of objects for various purposes, in the air of the sanitary protection zone, industrial emissions, emissions into the atmosphere.For measurements at low temperatures, an isothermal (thermo) bag can be included in the standard package at the request of the Customer for an additional fee.

The surface smart probe L=1000 mm SZPV.1000P with built-in flash memory is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor based on the Android program. Operating conditions of the SZPV.1000P smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPV.1000P smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor based on the Android program. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor based on the Android program. Automatic transition to sleep mode after 50 seconds. The ability to connect an external power supply. Possibility of calibration.

The submersible smart probe L=150 mm SZPG.150 is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor, Android program installed. Operating conditions of the SZPG.150 smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPG.150 smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor, Android program installed. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor, Android program installed. Automatic transition to sleep mode after 50 seconds. The ability to connect an external power supply. Possibility of calibration.

Application range: 1.8 ... 55.0 m/s Alarm threshold setting range: wind speed from 12 to 40 m/s The range of setting alarm thresholds in time is from 2 to 5 seconds. Accuracy characteristics: PG±(0.5+0.05V) m/s Device weight: 4.5 kg The average service life is at least 8 years. The anemometer sensor is supplied with heating only. Application conditions: wind speed sensor from -60C to +50C the measuring panel is from -10C to +40C powered by a 220 V network or a DC 12V source. The modification of the M-95-CM "Dome" automatically disables alarm and emergency devices after the time desired by the customer after the weather conditions have improved to a safe level. The wind receiver is metal. Minor design changes are possible that do not remove the device from the approved type. It is possible to supply the device with a computer output (RS-232) on an additional order.

Smart submersible reinforced probe L = 300 mm SZPGU.The 300P with built-in flash memory is designed to measure the temperature of various materials by directly contacting the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor, Android program installed. Operating conditions of the SZPGU.300P smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPGU.300P smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor, Android program installed. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor, Android program installed. Automatic transition to sleep mode after 50 seconds. The ability to connect external power. Possibility of calibration.

The digital contact thermometer TK-5.09S is designed to measure the temperature of various materials, relative humidity by direct contact of the probe with the measuring object. The contact thermometer consists of an electronic unit and replaceable probes. Thermoelectric converters (TP) with NSH according to GOST R 8.585 are used as thermosensitive elements in the probes . Capacitive humidity sensors are used as a measuring element in the relative humidity probes.

The kit is designed to control the temperature and pressure at the points of water sampling of hot water and HVAC systems, archiving the measured results for the purpose of their further documentation and analysis. The TSTP-M kit allows you to record changes in temperature and pressure directly at the points of water intake of hot water and HVAC, for a long period. With the subsequent transfer of data recorded in the device's memory to a computer, for printing a report, graph, etc. Features of the CHU-M kit The CHU-M kit allows you to control the pressure and temperature at the hot water and HVAC disassembly points. The kit consists of a four-channel meter recorder, which allows you to store 15,000 values in memory, for each channel with an interval of 5 seconds. up to several hours, which allows you to take measurements and store data for up to 1 year.

The smart submersible probe L=150 mm SZPG.150P with built-in flash memory is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor, Android program installed. Operating conditions of the SZPG.150P smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPG.150P smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmission of data about measured physical quantities via Bluetooth to a device with the ThermoMonitor, Android program installed. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor, Android program installed. Automatic transition to sleep mode after 50 seconds. The ability to connect external power. Possibility of calibration.

The PKN-2 device is designed to determine the swelling coefficient of clays. Device indicators: Indicator division price, mm — ( 0.01 ) Working stroke of the indicator rod, mm — ( 11.5 ) Overall dimensions, mm — ( 60x85x415 ) Weight, kg — ( 0,7 )