Search

The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. An additional shelf has been added to prevent the tubes from skewing when they are installed. It is used in water baths and not only. The tripod has an individual packaging. Designed for storing test tubes.

Furniture for laboratory work. Desk Length, mm: 1500 Depth, mm: 700 Height, mm: 760 COMPLETE SET table top, base and curbstones – melamine 16mm thick left curbstone with 3 drawers, internal drawer size – 310*470* 100mm, full extension guides

The Korsa NV-1500 SHV-SPB Laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a countertop made of chemical-resistant plastic. External dimensions of the cabinet (W×D×H): 1410×700×1960 mm. Dimensions of the working area (W×D×H): 1378×540×750 mm. Table top: chemically resistant plastic. A reliable fume cupboard for laboratories Working surface material: chemical resistant plastic. It is moisture-resistant, resistant to prolonged exposure to concentrated acids and alkalis. It has limited resistance to high temperature and to prolonged exposure to organic solvents. It is a popular choice for laboratories, suitable for training workshops, analytical and medical laboratories. Ovens or drying cabinets should not be placed on such a countertop. The working area is closed by one lifting frame with a counterweight. There are two exhaust zones in it: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.

BASIC EQUIPMENT Working box working surface – porcelain stoneware slabs working window height – 750mm housing – metal painted with powder paint (RAL 7035) with the texture of shagreen leather lifting screen no lighting no flange ∅ 250 mm (distance from the back panel to the center of the flange – 215mm) Frame base collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with a shagreen leather texture service panel – aluminum profile painted with powder paint (RAL 5023) with a shagreen leather texture automatic emergency power off 16A two splash-proof sockets with a 3.2kW cover (IP54) adjustable supports

The laboratory drying cabinet SNOL-F-25/500-I2 is designed for thermal testing, aging, as well as drying, tempering and other types of heat treatment of various materials in an air environment at temperatures up to 500 ° C with natural or forced air convection in stationary conditions.

Operating temperature range -30...+50 °C Two places for glass viscometers. Stability and uniformity of temperature in the working bath is not worse than ± 0.01 ° C. Bath volume 12 l Overall dimensions 440x710x620 mm The open part of the bath is 165x85 mm Bath depth 300 mm The size of the viewing window is 130x270 mm Weight 55 kg Power consumption 3.5 kW

Laboratory heating plate for heat treatment at temperature control and heating time. It can be equipped with an additional function for setting the heating speed. The heating platform is made of duralumin. The size of the heating surface: 284x220 mm. Heating temperature: 40-400 °C. It can be equipped with a tray for a sand bath.

It is designed for thermostating 4 tripods with Florinsky tubes during serological studies. Each tripod is designed for the installation of 100 Florinsky tubes with a size of Ø14×60 mm. The bath can be used in laboratories of hygiene and epidemiology centers, veterinary medical examination, medical laboratories and other laboratories conducting serological studies. Bath volume 23 l Overall dimensions 650x615x210 mm The open part of the bath is 480x480 mm Bath depth 100 mm Weight 23 kg Power consumption 2.0 kW

The NV-1000 MOP is a large table with a deep sink made of polypropylene and with a built—in dryer for 18 seats. It is designed for standing work: its height is 85 cm. Assembled dimensions (W×D×H): 1000×600×1650 mm. The table top is made of laminated chipboard. It has a built-in Stegler WJH0357F polypropylene sink, its internal dimensions (W×L×H): 490×390×290 mm. The polypropylene is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents and suits perfectly for washing laboratory dishes. The package includes a stainless steel mixer with flexible 300 mm tap connectors and a siphon. The upper part of the inclined shelves of the dryer, on which dishes are placed, is covered with a polypropylene insert to protect it against water and reagents. The 18 pins are also made of polypropylene. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-1000 MOP tables A wide table with a polypropylene sink and dryer for 18 dishes. An inexpensive solution for laboratories that value the reliability and durability of furniture. The polypropylene is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Application of NV-1000 MOP tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

BASIC EQUIPMENT Working box front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) the front anti-spill side is acid-resistant polished stainless steel. steel (AISI 316) rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – polypropylene on the upper panel: LED dust– and moisture-proof lamp 2x22 W (IP65) is separated from the working space by tempered glass with a thickness of 4mm flange d=250mm (distance from the back panel to the center of the flange - 170mm) switching box with automatic emergency power off 16A 3 extraction levels easily removable exhaust canopies the glass ceramic heating platform is located on the left side of the countertop size 640*500mm (working area 580*430mm, 2 independent heating zones) power up to 5.7kW heating up to 400 ° C counterweights are placed in the front pylon racks and are easily serviced The frame base is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather the service panel is an aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather adjustable supports.

NV-800 P are small wall-mounted tables with a superstructure in the NV line. The table top is 70 cm deep. A lamp and two sockets are built into the superstructure. It is designed for standing work: the height from the floor to the table top is 85 cm. External dimensions of the table (W×D×H): 760×700×1650 mm. Working surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-800 PL: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-800 PC: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-800 PSP: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures, heating devices should not be placed on the surface. NV-800 PP: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 25 cm, and its height is 80 cm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The side laminated panels of the table (chipboard 16 mm thick) are edged with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-800 P tables An inexpensive solution for laboratories that value the reliability and durability of furniture; Suitable for small rooms; The working surface can be selected based on the needs of your laboratory; It is convenient to work while standing: the height of the working surface is 85 cm; On the shelves you can store accessories for devices on the table, laboratory utensils or reagents. Application of NV-800 P tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

Design features: Microprocessor temperature controller; Four-sided heating; Natural air convection in the working chamber; The material of the chamber is steel painted with heat–resistant paint; Bright LED display; Conveniently located control panel; LED indicators of heater operation and protection operation; Alarm when the current temperature exceeds the limits of the permissible range; Reliable door closing mechanism; High-quality silicone sealer; Highly efficient thermal insulation of the housing; The case is made of high-quality sheet steel and painted with heat-resistant powder paint; Number of shelves: standard – 2, maximum – 6. Technical specifications: Maximum heating temperature, °C +350 The error of reproducing the set temperature ° C ± 5 Temperature maintenance error, ° C ± 2 Warm-up time to the maximum temperature, no more, min 45 Dimensions of the working chamber, (WxHxD), not less than mm 340x400x415 Overall dimensions, (WxHxD), not more than 685x580x670 mm Rated supply voltage, 220 V Rated power, W 2200